Categories
new blog
1.The cause of a back adhesion: (1)the paste itself anti-viscosity, especially in the wet weather easy to stick back; (2)After the printing is completed, it is packaged without perfect heat treatment; (3)adjust the slurry formula is not appropriate, adding too much transparent slurry easy to cause back adhesion; (4)transport or storage conditions are not good, in high temperature, high humidity co...
Thank you for the New Year gift of our company. In the New Year, we hope to make our products better and serve our customers better,Hope the performance increase day! Sinograce Chemical wish you a happy New Year!
Environmentally friendly water-based polyurethane waterproof coating is two-component,The component A is an isocyanate-terminated prepolymer obtained by polycondensation of polyether and isocyanate, and the component B is a colored liquid composed of a plasticizer, a curing agent, a thickener, a coagulant, and a filler.After use, the two components of methyl and ethyl are evenly mixed according to...
Glass fiber is an important reinforcing material for the manufacture of fiber reinforced plastics (FRP), and is also used for weaving high temperature resistant fiber cloth.But the glass fiber that has not been treated is brittle, easy to take static electricity after friction, and the surface is smooth, when making the reinforcing material of the resin is not easy to stick with the resin.In the m...
1.Paper-based coating resins have been switched from natural water-based resins such as celluloses to synthetic resin emulsions such as carboxystyrene butadiene emulsions, polyvinyl acetate emulsions, and acrylic emulsions, among which acrylic emulsions have more excellent properties.However, the above resins are still difficult to meet the higher requirements for the development of coated paper. ...
Polyurethane and general epoxy products application The use of the two products requires strengthened compressive tensile cement floors or floors and drainage ditches that are resistant to corrosion by strong acids and alkalis, such as chemicals, metallurgical plants, electroplating plants, power plants, pharmaceutical plants, PCB circuit board plants, paper mills, Hardware factory, printing and d...
Material property (pu for short) is divided into: Pouring polyurethane elastomer (CPU for short) is one of the most widely used polyurethane elastomers with the largest yield. Thermoplastic polyurethane elastomer (TPU) -- thermoplastic polyurethane elastomer accounts for about 25% of the total amount of polyurethane.Mixed polyurethane elastomer (MPU) - accounts for about 10% of the total amount of...
Precautions for using two-component polyurethane adhesives 1.Before applying the adhesive, the surface of the adherend must be clean, dry and free of grease. 2.The resin and curing agent should be mixed in the required ratio. 3.When scraping the glue, please try to scrape it carefully as it has a defoaming effect. 4.Store adhesive in (> 10, <50 * C) and dry place 5.Run out of the mixed glue ...
Development trend of waterborne polyurethane: Nowadays, with the stricter requirements of environmental protection policies, the environmental protection requirements for the performance of adhesives will become higher and higher. Therefore, the greening and environmental protection of composite materials will be more and more important. There will be even more urgency.Therefore, the points mentio...
Current problems with waterborne polyurethane adhesives: (1) Low solid content: At present, the solid content of water-based polyurethane (WPU) can reach 45%. Fewer systems lead to higher drying and transportation costs. Increasing the solid content leads to an increase in the viscosity of the system, which makes emulsification and dispersion difficult. Reduced emulsion stability. (2) Slow drying ...
Copyright © 2015-2025 Anhui Sinograce Chemical Co., Ltd..All Rights Reserved.powered by dyyseo.com
top