Categories
Water-based adhesives are environmentally friendly adhesives made of natural or synthetic macromolecule as adhesives and water as solvent or dispersant instead of toxic organic solvents that pollute the environment.Existing water-based adhesives are not 100% solvent-free and may contain limited vocs as additives for their aqueous media in order to control viscosity or fluidity.Advantages are mainl...
The soluble carrier of water-based plastic composite ink is water. Because water is used as the soluble carrier, water-based plastic composite ink has significant environmental protection and safety characteristics. It is safe, non-toxic, non-flammable and non-explosive, and almost no volatile organic gas is generated. No pollution to the atmosphere because of water-based plastic composite ink wat...
With the continuous enhancement of human awareness of environmental protection, environmental laws and regulations are constantly introduced and improved all industries are working together in the direction of environmental protection, green and health.With the development of flexible packaging industry, it has become an inevitable trend to reduce and remove organic solvents used in compounding.Wa...
After toning water-based plastic composite ink is used, there is often error with the standard color, which is difficult to completely avoid the problem, can only be reduced to a low limit. Different printing ink factory use of the same part of the printing machine, different printing machine mesh mesh line number Angle has a big difference, which makes the same ink, in different printing methods ...
Acrylic pressure sensitive adhesive is a large range, PUR is one of them, most of the acrylic pressure sensitive adhesive is heated operation, can be reheated after bonding, is reversible.And PUR is wet reaction acrylic pressure sensitive adhesive, heating operation, after bonding and moisture in the air reaction, after the reaction is irreversible (that is, heating will not melt). So PUR is more ...
◆ The procedure of bonding process:◆ The adhesive surface should be evenly coated to ensure infiltration, as far as possible to avoid bubbles, due to the porosity of the adhesive strength greatly reduced, resulting in degumming.Attention should be paid to the alignment of the position, not staggered, can be pressurized, air exclusion, make it close contact. Time is three important parameters of cu...
The chemical composition of glue, the polymer in the water environment glue (vinyl acetate in white glue is a kind of petroleum derivatives) are round particles, the radius of the general particle is between 0.5~5μm.The bonding of objects is achieved by the tension between the polymers in the glue.In the glue, water is the carrier of the polymer, and the water carries the polymer slowly into ...
Finally, ordinary glue products, ordinary glue products have a certain elasticity and softness, and have a good tensile length but tensile strength and strength is not very large, adhesion welcome you to consult, this is our email sales@sinogracechem.com
Composition of pressure sensitive tape 1.Pressure sensitive adhesive, 2.substrate 3.Primer 4.Back treatment agent 5.Isolation paper The main components of the pressure sensitive adhesive and resin, including rubber such as polyacrylic acid ester or polyvinyl ether, homogeneous base material requirements, small scale and good to solvent invasive, including, (1) fabric such as cotton, glass cloth or...
As we all know, with the development of society, people attach importance to food safety and so on, label printing is greatly encouraged, and label has become comparable to packaging. The development of label has driven the development of label printing, and ink is the main medicine in label printing,In the field of label printing, ink can be generally divided into three categories, namely: water-...
Surface treatment of metal materials 1)metal material surface degreasing: organic solvent degreasing alkali degreasing electric degreasing ultrasonic degreasing 2)metal material surface derusting 3)Activation treatment of metal surface 4)Metal surface sandblasting treatment: increase the surface roughness Surface treatment of non-metallic materials 1)Mechanical treatment: sandpaper grinding, etc 2...
First, pour the glue on the flat glass to observe its rheology, and wiggle it to observe its rheology,If the flow of glue is too fast, it means that the glue is too thin and poor, and too thick is not conducive to bonding. Secondly, with a hand dip to observe its viscosity if you can slowly draw, a little sticky hand is better. Then, pour it on a small piece of glass to observe its film forming ti...
The bonding effect can be achieved by applying pressure for a short time (non-aqueous solvent heating) It overcomes the solvent volatilization and drying time needed during the operation of structural adhesive, and can improve the working environment After stripping, it can be corrected without contamination and can be reused for many times Easy to operate, can greatly improve the production effic...
1.Permanent and removable options In terms of the performance of adhesives, they can be divided into two categories: permanent adhesives and removable adhesives.(Permanent is generally used in electronic machinery, such as electronic label, typical: mobile phone battery label, removable is generally used in food, personal care, such as: wet wipes label, fruit label, clothing label, etc.) 2.The sur...
Plastic film as the object of packaging printing, many kinds, and the use of printing also involves many aspects, so the variety of this kind of ink is extremely wide.In particular, this ink shall have the characteristics of fastness to adhesion printing effect processing tolerance and other requirements.The surface of plastic film is smooth, and the ink can not be permeated, so it must be printed...
Self-adhesive label Is also called self-adhesive label material. It is a composite material made of paper film or other special materials, coated with adhesive on the back, and coated with silicon protective paper as the base paper.And after printing die - cutting and other processing into finished labels. Self-adhesive materials are usually printed and processed on the label linkage machine. The ...
sinograce chemical
Sinograce Chemical is professional technical enterprise providing solutions of surface materials and manufacturing of raw materials. Sinograce Chemical Company is composed of R&D center, Manufacture center, Quality control department, Market center and International trade department. We have been dedicating to research on excellent paint/coating, adhesive for over 15 years. And now still conti...
Room 1013, Building A5, Financial Port Center, Yangzijiang Road, Baohe District, Hefei City， Anhui province, China
+86 0551 63459511
Copyright © 2015-2025 Anhui Sinograce Chemical Co., Ltd..All Rights Reserved.powered by dyyseo.com
top
English
français
русский
español
العربية