• 2026-08-01 10:23:15
• admin

When UV ink comes off during a tape test, the primer is often blamed first. However, poor adhesion can also result from the film surface, contamination, incomplete primer drying or incorrect UV curing. Here, “adhesion promoter” refers to a primer applied before printing. No single grade is suitable for every plastic film. Choose the Primer by Substrate PET and BOPET films often benefit from a prim...

• BOPP printing primer
• UV ink adhesion promoter
• water-based UV ink primer

• 2026-08-05 17:59:28
• admin

Choosing a water-based resin should begin with the application, not with viscosity, solids content, or price. Products with similar technical data can behave very differently in production. A resin may work well on paper but show weak adhesion on plastic film. A coating may form properly under heated drying but remain tacky at room temperature. A low-viscosity polyurethane dispersion may look too ...

• water-based resin
• Polyurethane dispersions
• Acrylic emulsions

• 2026-08-21 17:00:20
• admin

A good hot stamping result depends on more than the foil it self. The adhesive layer affects transfer quality, edge definition, adhesion, drying, and storage stability. When selecting a water-borne adhesive for hot stamping foil production, start with three points: the substrate, the coating process, and the stamping temperature. Check the Substrate Hot stamping foil may be used on paper, OPP, PET...

• PolyurethaneAdhesive
• Adhesive for Hot Stamping Foil
• modified polyurethane adhesive

• 2026-09-30 15:28:08
• admin

The softness or stiffness of a textile resin film affects fabric feel, blocking resistance, and the ability of a print layer to withstand rubbing and deformation. A film that is too soft or too hard for its application may affect the finished textile during processing, storage, and use. “Too soft” and “too hard” depend on the intended application. Prints on soft clothing fabrics and backcoatings t...

• pure acrylic textile printing binder
• textile printing binder
• textile resin