Categories
new blog
1.Ink The three primary color inks have different degrees of color bias, which will affect the color bias of the whole picture to different degrees. However, a small amount of color bias can be corrected from the ink preparation. When printing to grasp the gray balance of the ink used, the same amount of yellow, product, green do not produce neutral gray, they produce lighter, more turbidity with ...
①The residual ink is converted into gray black ink According to the principle of color science, the complementary color of the ink mixed together, its hue will become gray black (red + green, yellow + blue-purple). Therefore, we can use this principle to deploy the complementary ink into gray-black ink by deploying the special color ink, and add it to the black ink in a certain proportion to use i...
Pigment is the main component of ink, is a fine powder-like solid colored substance, can show ball, flake and other irregular shape. Generally, the diameter of pigment particles is in the range of several hundred nanometers to tens of microns (10-7~10-5m). The pigment can be evenly dispersed in the medium, but it is insoluble in the medium and does not react with the medium. Pigment is a colored b...
Aluminum foil can also be printed with water-based ink. As a non-absorbent substrate, aluminum foil poses a major challenge to water-based ink printing. However, some aluminum foil products that require food-grade printing cannot be printed with oil-based inks, so water-based inks have become the best choice. However, due to the poor absorption of aluminum foil to water-based ink, many inexperienc...
In the process of UV flexographic printing, the viscosity of the ink is one of the key factors that affect the printing quality and effect. Choosing the right viscosity UV flexographic ink is crucial to ensure printing quality and efficiency. When adjusting viscosity, it is usually necessary to consider many factors such as printing equipment, printing materials, image details and the expected pri...
First, water-based lotion Aqueous emulsion is a colloidal dispersion system with water as the continuous phase and oil or other non-aqueous substances as the dispersing phase. It is a stable dispersion system formed by tiny oil droplets coated with surfactants. Water-based emulsion has many significant advantages, such as its low viscosity, easy to brush, easy to clean, non-toxic and harmless. The...
The grinding fineness of paint is one of the important qualities of color paint, which has a great impact on film forming quality, film gloss, durability, storage stability of paint, etc., and is one of the routine testing items of paint production. The fineness of the paint refers to the size of the particle size or the uniformity of the dispersion of the pigment or the bulk pigment, and the unqu...
Flexo is a flexible, high resolution, warped letterpress plate. In recent years, flexo printing has developed rapidly in the field of printing, and its development prospects are generally optimistic. Flexographic printing presses transfer the right amount of ink to the substrate through a unique mesh roller. The appropriate use of ink is directly related to the printing production operation and pr...
Architectural coatings mainly use water as a dispersing medium and diluent, and its advantages are that the water of the dispersing medium is non-toxic and harmless, manufacturing and storage and transportation without the danger of explosion, no pollution to the environment, and to solve the problem of excessive VOC(volatile organic compounds) of solvent-based coatings at normal temperature. Film...
I.Definition The emulsion is a colloidal system with a particle size of 0.1~10μm formed by two insoluble liquids through the action of emulsifier. Secondary dispersion refers to a colloidal system formed by particles (or molecular groups) less than 1μm are dispersed into a continuous phase (such as water) under the action of a stabilizer. By definition, the formation of emulsions and secondary dis...
1.Type: There are three main types of water-based acrylic resins, including emulsion, water dispersion and aqueous solution. The emulsion is synthesized by emulsifying olefins in water under the action of water-based free radical initiator. The aqueous dispersion is synthesized by free radical solution polymerization or stepwise solution polymerization. Aqueous acrylics are directly soluble in wat...
Water-based resins can be divided into water-emulsion, water-dispersed and water-soluble according to their appearance. There are many people think that this is the same resin, in fact, it is not only the appearance is not the same and the use and characteristics are very different. Water-based acrylic resins are generally divided into water-based emulsion acrylic resins and water-soluble acrylic ...
Leather finishing is generally divided into three parts:Primer coat, middle coat, and topcoat.Primer requires strong adhesion, hiding power, good embossing formability and stereotyping, and the middle coating further covers and modifies the color, and finally achieves the visual and physical performance requirements through the topcoat.With a specific topcoat, the effect of extinction or ligh...
Roofing decoration materials in the color stone metal tile is how to perform well in waterproof performance Why is the waterproof performance so good? Material characteristics Colored stone metal tile using aluminum-plated zinc steel plate as the base, this material has excellent anti-corrosion properties, can effectively resist the erosion of the external environment. At the same time, the acryli...
High quality real stone paint emulsion SA-212: excellent comprehensive properties of real stone paint; Excellent yellowing resistance; Applied to real stone paint, does not contain APEO, does not contain heavy metals, is an environmentally friendly product. Styrene Acrylic Emulsion For Real Stone Paint SA-212 adopts the optimal formula design and process optimization, and gives full...
Fabric coating is a kind of fabric treated by a special process. It can form a uniform layer of covering material on the surface of the fabric, so as to achieve waterproof, windproof, breathable and other functions. Textile Coating, also known as glue coating, that is, acrylic coating, is the most common and most common kind of coating at present. As a textile person, you must know 15 kinds of coa...
sinograce chemical
Sinograce Chemical is professional technical enterprise providing solutions of surface materials and manufacturing of raw materials. Sinograce Chemical Company is composed of R&D center, Manufacture center, Quality control department, Market center and International trade department. We have been dedicating to research on excellent paint/coating, adhesive for over 15 years. And now still conti...
Room 1013, Building A5, Financial Port Center, Yangzijiang Road, Baohe District, Hefei City， Anhui province, China
+86 0551 63459511
Copyright © 2015-2025 Anhui Sinograce Chemical Co., Ltd..All Rights Reserved.powered by dyyseo.com
top
English
français
русский
español
العربية