Categories
new blog
Anti -deformation power Anti -deformation capacity refers to a certain deformation after the composite product is affected by external forces, and this deformation will produce a certain amount of elasticity, especially the thin film. If the combination of composite is not enough to resist the elasticity of the return, foaming will occur, etc. Happening. There are many processes that produce defor...
Eight, filling The concept of filling is rarely mentioned in the application of laminating glue, but can never be ignored.The surface of the paper inevitably exists in some depression. When compounding, if the depression in the paper cannot be fully filled, it will also cause the weak. (Excellent filling effect) &nb...
Thirteen.Skinning There are two common skin phenomena: one is in the packaging bucket of glue surface skin, the other is in the glue tray surface skin. ■ The surface layer of glue in the packing bucket produces crusts 1)If the temperature of glue filtration packaging is too high, it is easy to form crust in the barrel when the temperature drops, which is common in high temperature in summer. Becau...
Screen printing UV pressure sensitive adhesive and screen printing water-based pressure sensitive adhesive, has the following different characteristics: because UV curable pressure sensitive adhesive does not contain water or organic solvent, so it can be cured without heating drying channel, and water-based pressure sensitive adhesive to water as diluent, need a lot of heat to volatilizing water;...
① BOPP/VMCPP The composite structure is mainly used in light food packaging such as instant noodles, egg yolk pie and snow cake. The composite structure is the most suitable for one component water-based adhesive. Compared with solvent-based polyurethane adhesive, the single group of water-dispensing adhesive has less ink transfer phenomenon, high initial adhesion, no need for curing, and can be d...
Water-based coating is an effective means to process the surface of printed matter, to improve the gloss and strength of the surface of printed matter, enhance the aesthetic effect, temperature resistance, water resistance, wear resistance, improve the grade of printed matter and commodity value. Therefore, to measure the quality of the coating, it is also necessary to examine the brightness, stre...
After the composite product has been cured at a certain temperature and time, the interlayer peeling composite film adhesive layer still has a certain viscosity, that is, after the composite film peeling, the two-layer film will be re-glued together by hand, and the severe drying of the composite film adhesive layer will directly affect the peeling strength of the composite film, while the slight ...
With the continuous enhancement of human environmental awareness, environmental protection laws and regulations are also being introduced and improved. All industries are working together in the direction of environmental protection, green, healthy.With the development of flexible packaging industry, it has become an inevitable trend to reduce and remove the organic solvents used in the compound.W...
I.Overview: Refilm process is widely used in all kinds of packaging, small to medicine box, artifact box, large to outer packing boxes and various product packaging.The current recoating technology includes precoating, dry recoating and wet recoating.Wet composite uses water-soluble adhesive cold paste process. Dry composite traditional composite film process is to apply solvent-based adhesive dir...
Water-based adhesive with high polymer, water-soluble resin as the main raw materials, water as the solvent, odor is small, environmental protection and non-toxic. With the continuous improvement of people's environmental awareness, water-based adhesives have become the mainstream of the market in recent years. In practical application, some packaging and printing manufacturers do not know enough ...
①BOPP / VMCPP The composite structure is mainly used in the field of light food packaging such as instant noodles, egg yolk pie and snow cake. The composite structure is most suitable for one-component aqueous adhesives. Compared with solvent-based polyurethane adhesive, single component water glue less ink transfer phenomenon, and the initial adhesion is high, without aging, can be directly cut b...
PET protective film material is transparent colorless, the surface after hardening treatment, the general PET protective film material according to the origin of different, the surface hardening value between 3H-4H, the better the surface hardening, the stronger the wear resistance. Light transmittance is also the main property of PET protective film materials, the general light transmittance is m...
Composition of adhesive Adhesives are adhesives that can bond two objects together, referred to as glue. There are different types of adhesives according to different divisions, the use of adhesives is also quite extensive, and now it has been filled in our lives, for adhesives, do you know how it is composed? How adhesives are composed: Synthetic adhesive Synthetic adhesive is composed of main ag...
Water-based pressure-sensitive adhesive is a type of adhesive that uses water as a solvent and is pressure-sensitive, that is, it can adhere quickly to the surface when slight pressure is applied. Due to its environmental protection, non-toxic, cost-effective, adjustable viscosity and other advantages, it has gradually become the mainstream product in the pressure sensitive adhesive market. Accord...
With the development of the market economy, the demand for flexible packaging in various industries is also rising year by year. The development of flexible packaging materials and processing technology continue to improve, flexible packaging in many areas is playing an increasingly important role, so what are the composite ways of flexible packaging? This article briefly describes five composite ...
Depending on the coating material used, the type of coating is also different. PVDC coating, PVOH coating, silicon oxide (Si0x) coating, Acrylic (Acrylic) coating these four kinds of plastic coating characteristics and applications are introduced. According to the different coating materials used, plastic coating mainly has the following types: 01/PVDC coating PVDC emulsions can be coated in sever...
sinograce chemical
Sinograce Chemical is professional technical enterprise providing solutions of surface materials and manufacturing of raw materials. Sinograce Chemical Company is composed of R&D center, Manufacture center, Quality control department, Market center and International trade department. We have been dedicating to research on excellent paint/coating, adhesive for over 15 years. And now still conti...
Room 1013, Building A5, Financial Port Center, Yangzijiang Road, Baohe District, Hefei City， Anhui province, China
+86 0551 63459511
Copyright © 2015-2025 Anhui Sinograce Chemical Co., Ltd..All Rights Reserved.powered by dyyseo.com
top
English
français
русский
español
العربية