Categories
new blog
After the composite product has been cured at a certain temperature and time, the interlayer peeling composite film adhesive layer still has a certain viscosity, that is, after the composite film peeling, the two-layer film will be re-glued together by hand, and the severe drying of the composite film adhesive layer will directly affect the peeling strength of the composite film, while the slight ...
With the continuous enhancement of human environmental awareness, environmental protection laws and regulations are also being introduced and improved. All industries are working together in the direction of environmental protection, green, healthy.With the development of flexible packaging industry, it has become an inevitable trend to reduce and remove the organic solvents used in the compound.W...
"Non-stick pan" is a very common pot in the kitchen, because in the process of using less oil consumption, less smoke, but also not easy to paste the problem, so it is welcomed by many people. In recent years, however, there have been more and more controversies about non-stick pans: Some people think that non-stick coating will produce toxic substances, can not be used for a long time; Some peopl...
1. the reason why non-stick pot is not stick, all rely on the coating material on the surface of the pot. These coating materials have good lubricity, small friction coefficient, small surface tension, food is not easy to stick to the pot.Two types of coating materials are commonly used for nonstick pans: fluoropolymers, such as teflon, and silicone polymers. Non-stick wok use PFOA-free high quali...
I.Overview: Refilm process is widely used in all kinds of packaging, small to medicine box, artifact box, large to outer packing boxes and various product packaging.The current recoating technology includes precoating, dry recoating and wet recoating.Wet composite uses water-soluble adhesive cold paste process. Dry composite traditional composite film process is to apply solvent-based adhesive dir...
Water-based adhesive with high polymer, water-soluble resin as the main raw materials, water as the solvent, odor is small, environmental protection and non-toxic. With the continuous improvement of people's environmental awareness, water-based adhesives have become the mainstream of the market in recent years. In practical application, some packaging and printing manufacturers do not know enough ...
Choice of water-based adhesive Application index Some packaging and printing enterprises reflect that some water-based adhesives will degummy soon after gluing; Viscosity is not stable, sometimes bond firmly, but sometimes not bond; It works well in hot weather, but it doesn't work in cold weather.In fact, this is due to the lack of understanding of water-based adhesive application indicators. The...
ater Based Polyurethane Peelable Protective Coating PU-207 is a protective resin made of waterborne polyurethane base material with advanced technology. The water-based peeling paint made from this is bright in color, fine and uniform in particle size, coating on the surface of automobiles, furniture, electrical appliances and other objects as a protective coating, has good protecti...
In nylon, PP and other plastics and metal substrate painting and bonding process of the industrial surface treatment industry, the role of the base coating agent is equivalent to the auxiliary additives. In the painting process to improve the combination between the paint and the substrate, the bonding process is to cooperate with the adhesive, improve the adhesion of the adhesive or glue to the s...
Polyurethane is the short form of polyurethane (PU). It is a block polymer formed by addition polymerization. It is a polymer compound with flexible and elastic polyether or polyester as soft segment and rigid and hard carbamate as hard segment. It contains a considerable number of ammonia ester bonds. Waterborne polyurethane has been successfully applied in the textile printing and dyeing industr...
Water based adhesive Water-based adhesive refers to the water-soluble polymer dissolved into appropriate concentration of aqueous solution, or insoluble polymer dispersed into micro-particles (emulsion) in water with the help of surfactant in the general term of adhesives;In simple terms, adhesives made of materials that can be dispersed or dissolved in water are aqueous adhesives and are often re...
Environmental protection pressure has prompted some traditional solvent-based products to gradually withdraw from the market and replace them with water-based, high solid content, powder products, etc.Waterborne polyurethane, as an important member of waterborne products, is facing unprecedented development opportunities with its unique excellent properties.In addition to the leather industry, it ...
With the continuous improvement of people's demand for life, glue and adhesive products are also advancing with The Times and constantly upgrading to meet people's needs. The emergence of removable glue greatly satisfies this phenomenon, so what is removable glue? What are the characteristics of removable glue? Removable adhesive is a new type of environmentally friendly synthetic material, the ap...
First: Teflon coating introduction Industrial Teflon coating is suitable for plastic rubber mold, ball mold, glove mold, latex mold, roller, conveyor belt, mechanical parts and other surface treatment, containing "FEP" and "PTFE" polytetrafluoroethylene ingredients with high-performance resin, divided into the bottom coating and surface coating a total of two layers, has the best anti-corrosion, h...
①BOPP / VMCPP The composite structure is mainly used in the field of light food packaging such as instant noodles, egg yolk pie and snow cake. The composite structure is most suitable for one-component aqueous adhesives. Compared with solvent-based polyurethane adhesive, single component water glue less ink transfer phenomenon, and the initial adhesion is high, without aging, can be directly cut b...
Pressure sensitive adhesive (PSA) is a self-adhesive material, only need to apply a small pressure, can form a van der Waals force on the surface of the two objects, and the adhesive is firmly bonded, this pressure sensitive bonding performance is its basic feature, is also different from other adhesives typical characteristics. PSA can be divided into solution type, emulsion type, photocuring typ...
sinograce chemical
Sinograce Chemical is professional technical enterprise providing solutions of surface materials and manufacturing of raw materials. Sinograce Chemical Company is composed of R&D center, Manufacture center, Quality control department, Market center and International trade department. We have been dedicating to research on excellent paint/coating, adhesive for over 15 years. And now still conti...
Room 1013, Building A5, Financial Port Center, Yangzijiang Road, Baohe District, Hefei City， Anhui province, China
+86 0551 63459511
Copyright © 2015-2025 Anhui Sinograce Chemical Co., Ltd..All Rights Reserved.powered by dyyseo.com
top
English
français
русский
español
العربية