Categories
new blog
Water - based coating formulation design system Waterborne coatings, including waterborne wood lacquers, are water-based dispersions and diluents. Unlike conventional solvent-based coatings, the formulation system is a more complex system.When formulating, not only the type of polymer, the properties of the emulsion and the dispersion are concerned. It is also necessary to rationally select variou...
In the formulation of waterborne wood lacquer topcoats, the binder is a key component in forming the film and determining the properties of the film. The binder, ie the polymer emulsion, dispersion or hybrid, accounts for more than 80%, preferably more than 90%.Since the solid content of the emulsion, especially the aqueous dispersion is relatively low (the aqueous dispersion is generally 30% to 3...
Formulation design system for waterborne coatings - film forming AIDS The polymer constituting the emulsion or dispersion generally has a glass transition temperature higher than room temperature. In order for the emulsion particles to be well fused into a uniform paint film, it is necessary to reduce the minimum film formation temperature (MFFT) of the crystallization aid.Film form...
Formulation design system for waterborne coatings - film forming AIDS The polymer constituting the emulsion or dispersion generally has a glass transition temperature higher than room temperature. In order for the emulsion particles to be well fused into a uniform paint film, it is necessary to reduce the minimum film formation temperature (MFFT) of the crystallization aid.Film form...
Formulation design system for waterborne coatings - film forming AIDS The polymer constituting the emulsion or dispersion generally has a glass transition temperature higher than room temperature. In order for the emulsion particles to be well fused into a uniform paint film, it is necessary to reduce the minimum film formation temperature (MFFT) of the crystallization aid.Film forming agents are ...
Water - based coating formulation design system - matting agent Matting agents are additives used to control the gloss of waterborne wood coatings to meet the broad needs of mainstream matt paints in today's market.The extinction mechanism of the matting agent can be arranged in an orderly manner on the surface of the coating film, so that the surface of the coating film is uneven, causing the lig...
Waterborne paint formulation design system - pH regulator Waterborne wood coatings may also need to adjust the pH when necessary.Most emulsions or aqueous dispersions have been adjusted to a pH of 8 to 9 when they are produced, eliminating the need for pH adjusters when making paint.If the pH value is different, add 0.05% to 0.1% of the pH adjuster during the paint making process, and adjust the p...
The third step in the treatment of water-based paint coated substrates is sealing. The role of the water-based putty is to make the surface of the substrate such as wood not very regular and smooth and minor defects and defects, such as pores, fine cracks, pits, joints and concrete, to reduce the surface roughness and increase the flatness.The requirements for water-based putty are good adhesion a...
Anhui Sinograce Chemical Co., Ltd Polyurethane condoms, known as condoms, are made of polyurethane condoms, similar to latex condoms. Polyurethane was applied to condom production in Japan, until the emergence of China's Nakagawa 001, which broke Japan's monopoly on the production field. Because the common latex condoms on the market are thicker and polyurethane has good ...
Automotive interior adhesive is a anionic waterborne polyurethane emulsion developed and produced by ourselves, which belongs to environmental protection waterborne polyurethane adhesive. Appearance Dark grey liquid Solid content(% ) 50±1 PH 6-9 softening point(℃) 45-55℃ Proportion（g/cm3） 1.06±0.02 viscosity（mPa.s） 1000-2000（Viscosity can be adjusted） Application Area Automobile interior adhesive ...
According to the current development trend of waterborne polyurethane coating, green polyurethane coating technology is mainly divided into two categories: waterborne polyurethane coating and solvent-free polyurethane coating.Among them, solvent-free polyurethane coating mainly contains polyurethane hot melt adhesive coating and light curing polyurethane coating.Waterborne polyurethane (WPU) is a ...
PCL is a fully degradable polymer with good biocompatibility. When introduced into waterborne polyurethane, it can make waterborne polyurethane have shape memory.Shape memory waterborne polyurethane has attracted wide attention for its shape memory function, temperature sensitivity and moisture permeability. PCL3000 PCL4000 was used as the soft segment, and toluene diisocyanate was used as the har...
Surface treatment of metal materials 1)metal material surface degreasing: organic solvent degreasing alkali degreasing electric degreasing ultrasonic degreasing 2)metal material surface derusting 3)Activation treatment of metal surface 4)Metal surface sandblasting treatment: increase the surface roughness Surface treatment of non-metallic materials 1)Mechanical treatment: sandpaper grinding, etc 2...
Polyurethane (PU) is a kind of organic polymeric compounds containing repeated carbamate group (NHCOO) in the main chain.Polyurethane polymer materials have the advantages of wear resistance, high temperature resistance, good adhesion, easy processing, low price, but some polyurethane water resistance, heat resistance is poor, need to be modified by specific methods, in order to achieve the purpos...
Protective film resin Automobile coating resin High resilience waterborne polyurethane resin 1.Typical properties Appearance： Milky white liquid Protective film resin Automobile coating resin Ph： 7.0-9.0 Automobile coating resin Solid content： 40±1% Charge： Anionic High resilience waterborne polyurethane resin Viscosity (25℃)： 300-800cP Elongation (%)： >200...
Aqueous matte resin matte aliphatic aqueous polyurethane dispersion is a high performance solvent-free anionic aliphatic matte aqueous polyurethane, dull, soft to touch, with excellent hydrolysis resistance, heat resistance and bending resistance. Product performance Appearance Milky liquid Application With excellent flexibility and adhesion, it can be used alone or mixed with other em...
sinograce chemical
Sinograce Chemical is professional technical enterprise providing solutions of surface materials and manufacturing of raw materials. Sinograce Chemical Company is composed of R&D center, Manufacture center, Quality control department, Market center and International trade department. We have been dedicating to research on excellent paint/coating, adhesive for over 15 years. And now still conti...
Room 1013, Building A5, Financial Port Center, Yangzijiang Road, Baohe District, Hefei City， Anhui province, China
+86 0551 63459511
Copyright © 2015-2026 Anhui Sinograce Chemical Co., Ltd..All Rights Reserved.
top
English
français
русский
español
العربية