Categories
new blog
What parameters of resin determine coating gloss? Question: What parameters of the resin determine the gloss of the film? Some people say that it is solid content, some people say it is OH value. So, what is the most important determinant of gloss? Answer: There are many parameters that determine the gloss of the paint film. The saturation of the resin: that is, its monomer structure, this index d...
1.Paper-based coating resins have been switched from natural water-based resins such as celluloses to synthetic resin emulsions such as carboxystyrene butadiene emulsions, polyvinyl acetate emulsions, and acrylic emulsions, among which acrylic emulsions have more excellent properties.However, the above resins are still difficult to meet the higher requirements for the development of coated paper. ...
1.The cause of a back adhesion: (1)the paste itself anti-viscosity, especially in the wet weather easy to stick back; (2)After the printing is completed, it is packaged without perfect heat treatment; (3)adjust the slurry formula is not appropriate, adding too much transparent slurry easy to cause back adhesion; (4)transport or storage conditions are not good, in high temperature, high humidity co...
One, extinction principle General can be divided into physical extinction and chemical extinction.Physical matting, is the addition of matting agent, so that the coating in the film when the uneven surface, reduce reflection and achieve low gloss. Two, the kind of matting agent Coating common matting agent can be divided into organic matting agent and inorganic matting agent two categories. 1.Orga...
In February 2020, during the severe situation of covid-19, Sinograce Chemical company dared to assume social responsibilities and made a modest contribution to the fight against covid-19. It donated alcohol and 84 disinfectant and other epidemic prevention materials to hefei primary and secondary schools and universities for daily disinfection of schools, with a total of 10 tons of 84 di...
1.Introduction to silicone acrylic emulsion Silicon-acrylic emulsion is a kind of composite emulsion. It is a copolymer emulsion of organosilicone and acrylate.Acrylic resin has many excellent characteristics, such as weather resistance and light resistance, long time under ultraviolet irradiation is not easy to yellow。In addition, it also has flexibility, so it is often used as a leather finishin...
Anhui Sinograce Chemical Co., Ltd Polyurethane condoms, known as condoms, are made of polyurethane condoms, similar to latex condoms. Polyurethane was applied to condom production in Japan, until the emergence of China's Nakagawa 001, which broke Japan's monopoly on the production field. Because the common latex condoms on the market are thicker and polyurethane has good ...
In July 2021, our company held a home party building activity, in order to welcome new employees, to show our team's enthusiasm and unity. Hope the company is developing better and better, welcome customers to consult our polyurethane coating, acrylic emulsionand other resins .
Functions of antifogging coating: 1 Super hydrophilic self-cleaning function:anti-fogging coating also uses super hydrophilic silicon oxide film to form a super hydrophilic film between the painted surface and dirt, so that dirt and coated surface separation and the use of natural rain wash away the stolen goods under the action of gravity, to achieve the purpose of self-cleaning. 2 Antistatic fun...
What are the uses of waterborne acrylic emulsions? Waterborne acrylic emulsion is used as finishing agent for silk fabrics and leather Water based acrylic emulsion is used as finishing agent and treating agent for photographic printing paper Waterborne acrylic emulsion has good sealing performance on wood grease and tannic acid, used as transparent sealing primer for wood,...
Printing mucilage requirements The requirements of printing mucilage for manual plate printing Manual table printing is to press the screen on the fabric of the table for manual scraping, and the pressure extrusion on the scraper will print the glue through the mesh hole of the pattern part to the fabric. The shear stress of the binder is small, so thePrinting mucilageis required to have good...
On January 26, 2022, SINOGRACE Chemical Co., Ltd. will hold the year-end summary meeting and annual convention, and wish everyone a happy New Year.
Waterborne polyurethane is often used in the preparation of waterborne coatings because of its excellent film formation and adhesion, excellent flexibility and wear resistance.However, water-based polyurethane dispersion contains a lot of surfactant, easy to produce bubbles, and because of the special properties of water-based polyurethane, it is necessary to use the characteristics of water-based...
Silicone antifoaming agent is a white viscous emulsion.It has been used in various industrial fields since the 1960s, but large-scale and comprehensive rapid development began in the 1980s.As silicone defoaming agent, its application field is also very wide, more and more attention by all walks of life. In chemical industry, papermaking, paint, food, textile, pharmaceutical and other industrial de...
The appearance of non-stick pan provides conditions for healthy cooking with less oil, and also makes cooking utensils more convenient to clean. However, in the non-stick frying pan into life at the same time, the safety of its coating has never been questioned.There are two main coating processes for non-stick frying pans: one is the traditional coating process, Teflon coating (PTFE); The second ...
Water based polyurethane is a kind of block copolymer containing soft segment and hard segment. The soft segment is composed of oligomer polyols, and the hard segment is composed of polyisocyanate and chain extender. It has excellent wear resistance, oil resistance, low temperature resistance, aging resistance and chemical resistance.At present, the water based polyurethane emulsion on the market ...
Copyright © 2015-2025 Anhui Sinograce Chemical Co., Ltd..All Rights Reserved.powered by dyyseo.com
top