Categories
new blog
Feature 1.Non viscous: almost all substances are not bonded with PTFE coating. Very thin films also show good non-adhesion properties. 2.Heat resistance: PTFE coating has excellent heat and low temperature resistance characteristics. Short time can withstand high temperature to 300℃, generally between 240℃~260℃ can be used continuously, with significant thermal stability, it can work at ...
Product Overview The product is made of sol-gel process, with inorganic nano sol as binder, with inorganic high temperature resistant pigments and functional inorganic fillers, cured by heating, to produce a ceramic like inorganic coating film.The main components of the coating film are Si(silicon), O (oxygen), A1 (aluminum), Ti (titanium) and so on. The coating film has high hardness, delicate fe...
The appearance of non-stick pan provides conditions for healthy cooking with less oil, and also makes cooking utensils more convenient to clean. However, in the non-stick frying pan into life at the same time, the safety of its coating has never been questioned.There are two main coating processes for non-stick frying pans: one is the traditional coating process, Teflon coating (PTFE); The second ...
Water based polyurethane is a kind of block copolymer containing soft segment and hard segment. The soft segment is composed of oligomer polyols, and the hard segment is composed of polyisocyanate and chain extender. It has excellent wear resistance, oil resistance, low temperature resistance, aging resistance and chemical resistance.At present, the water based polyurethane emulsion on the market ...
Together to understand the characteristics of water-based acrylic emulsion! 1.Excellent adhesion The polymer structure of water-based acrylic emulsion contributes to the flow and wettability of molecular chains on the substrate surface, making the coating and substrate molecules in close contact, to achieve high adhesion 2.High load-bearing capacity of the makeup filler can significantly reduce th...
Preparation method of waterborne acrylic emulsion 1.The preparation of water-based acrylic emulsion: the raw materials including acrylic hard monomer, acrylic soft monomer and acrylic functional monomer all acrylic monomer, emulsifier, water added to the pre-emulsifying kettle, emulsifying 30 ~ 40min.A non-stratified emulsion is obtained. Then the remaining water, remaining emulsifier and buffer a...
Self-adhesive refers to paper, film or other special materials as fabric, coated with adhesive on the back, a composite material printed with silicon protective paper as the base paper, the reason for the rapid rise of self-adhesive in recent years, because it is very practical, and very convenient, the cost is not high, the following to tell you about a few small knowledge of self-adhesive printi...
1.Excellent adhesion The polymer structure of water-based acrylic emulsion contributes to the flow and wettability of molecular chains on the substrate surface, making the coating and substrate molecules in close contact, to achieve high adhesion. 2.High load-bearing capacity of the makeup filler can significantly reduce the cost Waterborne acrylic emulsion has excellent fillability, the total sol...
"Non-stick pan" is a very common pot in the kitchen, because in the process of using less oil consumption, less smoke, but also not easy to paste the problem, so it is welcomed by many people. In recent years, however, there have been more and more controversies about non-stick pans: Some people think that non-stick coating will produce toxic substances, can not be used for a long time; Some peopl...
1. the reason why non-stick pot is not stick, all rely on the coating material on the surface of the pot. These coating materials have good lubricity, small friction coefficient, small surface tension, food is not easy to stick to the pot.Two types of coating materials are commonly used for nonstick pans: fluoropolymers, such as teflon, and silicone polymers. Non-stick wok use PFOA-free high quali...
Acrylic acid Important organic synthesis raw materials and synthetic resin monomer Acrylic resin is an important organic synthesis raw material and synthetic resin monomer, is a very fast polymerization rate of ethylene monomer.Is the simplest unsaturated carboxylic acid, consisting of a vinyl group and a carboxylic group. Most of them are used to manufacture methyl acrylate, ethyl ester, butyl es...
Application Acrylic emulsion is a kind of emulsion with wide applicability for construction. It can be used as a new chemical material for repairing steel structure concrete of hydraulic construction, port construction, highway, bridge, metallurgical chemical industry (urea chloro gangue) and other industrial civil buildings, such as seepage prevention, corrosion prevention and antifreeze. Cl...
Printing ink according to the plate type is mainly divided into relief ink, lithographic ink, gravure ink, screen printing ink four categories According to its own characteristics can be divided into two categories of water-based ink and oily ink So what is water - based ink and oil - based ink? What's the difference? Usually see a lot of books, albums and other paper printed matter are used ...
Water-based viscosifying emulsion plays a very important role in water-based acrylic pressure sensitive adhesive, which can improve the bonding strength and initial adhesion of pressure sensitive adhesive on high and low energy surfaces, so as to achieve the best balance point, and can improve the application range and grade of pressure sensitive products. Today, we will take you to understan...
Surfactants are now used not only in herbicides but in all forms of pesticides. Surfactants can be used to make pesticide preparations that can not be used directly. As a pesticide additive applied to pesticides, it can not only improve the use effect of pesticides, but also reduce the amount of pesticides, reduce the impact of pesticides on the environment, and bring great benefits to agricultura...
First: Teflon coating introduction Industrial Teflon coating is suitable for plastic rubber mold, ball mold, glove mold, latex mold, roller, conveyor belt, mechanical parts and other surface treatment, containing "FEP" and "PTFE" polytetrafluoroethylene ingredients with high-performance resin, divided into the bottom coating and surface coating a total of two layers, has the best anti-corrosion, h...
sinograce chemical
Sinograce Chemical is professional technical enterprise providing solutions of surface materials and manufacturing of raw materials. Sinograce Chemical Company is composed of R&D center, Manufacture center, Quality control department, Market center and International trade department. We have been dedicating to research on excellent paint/coating, adhesive for over 15 years. And now still conti...
Room 1013, Building A5, Financial Port Center, Yangzijiang Road, Baohe District, Hefei City， Anhui province, China
+86 0551 63459511
Copyright © 2015-2025 Anhui Sinograce Chemical Co., Ltd..All Rights Reserved.powered by dyyseo.com
top
English
français
русский
español
العربية