Categories
new blog
Polyurethane is the short form of polyurethane (PU). It is a block polymer formed by addition polymerization. It is a polymer compound with flexible and elastic polyether or polyester as soft segment and rigid and hard carbamate as hard segment. It contains a considerable number of ammonia ester bonds. Waterborne polyurethane has been successfully applied in the textile printing and dyeing industr...
The addition of wetting dispersant has obvious effect on the foam of some water-based ink.For example, polyacrylic acid wetting dispersants foam more than other types of wetting dispersants.Generally speaking, wetting dispersant foam with low dispersion capacity is also less. If diisobutyl sulfonate is based on disate, there is little foam at its content of 0.1-0.25%. The use of thickeners will ma...
Water - based ink is also known as water - based (oil) ink, referred to as ink.Water-based ink is made of water-soluble or water-dispersed polymer resin, colorant, surfactant and other related additives through chemical process and physical processing. Water - based ink containing a small amount of alcohol water as solvent, ink stability.Therefore, it is especially suitable for food, medicine and ...
Printing ink according to the plate type is mainly divided into relief ink, lithographic ink, gravure ink, screen printing ink four categories According to its own characteristics can be divided into two categories of water-based ink and oily ink So what is water - based ink and oil - based ink? What's the difference? Usually see a lot of books, albums and other paper printed matter are used ...
Water-based viscosifying emulsion plays a very important role in water-based acrylic pressure sensitive adhesive, which can improve the bonding strength and initial adhesion of pressure sensitive adhesive on high and low energy surfaces, so as to achieve the best balance point, and can improve the application range and grade of pressure sensitive products. Today, we will take you to understan...
Water based adhesive Water-based adhesive refers to the water-soluble polymer dissolved into appropriate concentration of aqueous solution, or insoluble polymer dispersed into micro-particles (emulsion) in water with the help of surfactant in the general term of adhesives;In simple terms, adhesives made of materials that can be dispersed or dissolved in water are aqueous adhesives and are often re...
Surfactants are now used not only in herbicides but in all forms of pesticides. Surfactants can be used to make pesticide preparations that can not be used directly. As a pesticide additive applied to pesticides, it can not only improve the use effect of pesticides, but also reduce the amount of pesticides, reduce the impact of pesticides on the environment, and bring great benefits to agricultura...
Environmental protection pressure has prompted some traditional solvent-based products to gradually withdraw from the market and replace them with water-based, high solid content, powder products, etc.Waterborne polyurethane, as an important member of waterborne products, is facing unprecedented development opportunities with its unique excellent properties.In addition to the leather industry, it ...
With the continuous improvement of people's demand for life, glue and adhesive products are also advancing with The Times and constantly upgrading to meet people's needs. The emergence of removable glue greatly satisfies this phenomenon, so what is removable glue? What are the characteristics of removable glue? Removable adhesive is a new type of environmentally friendly synthetic material, the ap...
First: Teflon coating introduction Industrial Teflon coating is suitable for plastic rubber mold, ball mold, glove mold, latex mold, roller, conveyor belt, mechanical parts and other surface treatment, containing "FEP" and "PTFE" polytetrafluoroethylene ingredients with high-performance resin, divided into the bottom coating and surface coating a total of two layers, has the best anti-corrosion, h...
①BOPP / VMCPP The composite structure is mainly used in the field of light food packaging such as instant noodles, egg yolk pie and snow cake. The composite structure is most suitable for one-component aqueous adhesives. Compared with solvent-based polyurethane adhesive, single component water glue less ink transfer phenomenon, and the initial adhesion is high, without aging, can be directly cut b...
PET protective film material is transparent colorless, the surface after hardening treatment, the general PET protective film material according to the origin of different, the surface hardening value between 3H-4H, the better the surface hardening, the stronger the wear resistance. Light transmittance is also the main property of PET protective film materials, the general light transmittance is m...
Surfactants play the role of wetting, dispersing, emulsifying and solutizing in pesticide processing, and have become one of the indispensable components of pesticide preparations, and are often called auxiliaries, emulsifiers, dispersants, auxiliary agents, etc., they can be a combination of a variety of surfactants.At present, pesticide formulations are developing in the direction of waterborne,...
Composition of adhesive Adhesives are adhesives that can bond two objects together, referred to as glue. There are different types of adhesives according to different divisions, the use of adhesives is also quite extensive, and now it has been filled in our lives, for adhesives, do you know how it is composed? How adhesives are composed: Synthetic adhesive Synthetic adhesive is composed of main ag...
The processing method of aluminum plating film is to vaporize metal aluminum through high temperature under high vacuum, making aluminum vapor deposit on the surface of plastic film, thus forming a composite flexible packaging material. In soft plastic packaging, aluminum plating film often used is basically divided into two categories, CPP aluminum plating and PET aluminum plating, but because al...
sinograce chemical
Sinograce Chemical is professional technical enterprise providing solutions of surface materials and manufacturing of raw materials. Sinograce Chemical Company is composed of R&D center, Manufacture center, Quality control department, Market center and International trade department. We have been dedicating to research on excellent paint/coating, adhesive for over 15 years. And now still conti...
Room 1013, Building A5, Financial Port Center, Yangzijiang Road, Baohe District, Hefei City， Anhui province, China
+86 0551 63459511
Copyright © 2015-2025 Anhui Sinograce Chemical Co., Ltd..All Rights Reserved.powered by dyyseo.com
top
English
français
русский
español
العربية