-
Introduction to the classification of film coating process
- 2023-12-25 11:09:33
- admin
According to the different raw materials and equipment, the coating process can be divided into two kinds of coating process and pre-coating process. That is to say, the film used in the coating process is now coated, and the adhesive used is generally solvent-based and emulsion type, prepared according to need. However, the film used in the pre-coating process is pre-coated, and the adhesive used...
-
What is the use of film adhesive process
- 2023-12-29 17:22:52
- admin
As a kind of widely used adhesive, coated adhesive has a variety of processes. Here are some of the common processes used: 1. Hot melt coating: hot melt coating is to place a layer of film on the surface of the print, and then through hot pressing the film and the print together.In this process, the laminating glue is heated to turn it into a liquid, which then forms a uniform coating between the ...
-
Color box die cutting indentation caused by burst line and dark line causes and solutions
- 2024-01-06 17:47:12
- admin
There are many factors affecting the quality of the film, in addition to paper, ink layer, film, adhesive and so on In addition to the objective factors, it is also affected by subjective factors such as temperature, pressure, speed, and glue amount. If these factors are not handled well, various laminating quality problems will occur. There are snowflakes on the product 1.The amount of glue is to...
-
Performance of various water-based adhesives in printing and packaging applications
- 2024-01-13 15:43:40
- admin
Water-based adhesives for printing are very common, which mainly include water-based pasting adhesive, laminating adhesive, water-based sealing adhesive and so on. Water-based laminating adhesive Water-based film adhesive has been widely used in recent years for its high brightness, low cost, easy operation and water-based environmental protection. Water-based film adhesive is mainly divided into ...
-
laminated adhesive Laminating adhesive for deep embossing BOPP film PET film paper coated glue
- 2024-01-19 17:38:15
- admin
Brand :Sinograce Type: Water base adhesive Appearance:Milky white emulsion with blue light Performance and use:This product is suitable for the coating of BOPP film, PET film and printed color paper (dry coating process). High bonding q degree, large tension compound drying speed, good parallel flow; For gold and silver cardboard, single powder paper bonding q degree, tension q, to avoid the...
-
Acrylic coating
- 2024-01-26 17:20:01
- admin
Acrylic paint is a fast drying paint made from pigments suspended in acrylic polymer emulsions and plasticizers, silicone oils, defoamizers, stabilizers, metal soaps. Acrylic paint is water-soluble, but becomes resistant to water when dried.Depending on the amount of paint diluted with water, or modified with acrylic gels, media, or pastes, the final acrylic paint can resemble watercolor, gouache,...
-
Properties and application scenarios of water-based coating adhesive
- 2024-02-04 17:32:27
- admin
Water-based coating adhesive is a product based on water-based environmental protection emulsion system, which is mainly used in the field of packaging and printing, and can firmly bond film materials to paper and other surfaces. Characteristics of water-based coating adhesive Fast dry :Under the appropriate temperature and pressure conditions, the water-based coating adhesive will dry quickly and...
-
Application processing technology, common faults and treatment methods of laminating glue
- 2024-02-28 17:42:35
- admin
Laminating glue is currently a kind of strong glue widely used in the market, so what is the application processing process of laminating glue? The application processing technology of laminating glue is as follows: 1, the composite method is dry composite, that is, the coating machine should use a dry composite machine with curing furnace and composite roller heating. 2, curing furnace ambient te...
-
Strippable resin for preparing a temporary protective layer
- 2024-03-23 17:25:13
- admin
What is a peelable resin? Strippable resin is a special resin material with strippable properties (also known as removable film resin). It is often used in the preparation of protective films for electronic products, packaging of semiconductor devices, etc., which can protect these products more intact, and it is easy to peel off when it needs to be replaced or disassembled. When prepari...
-
Factory direct sale Water-based strippable polyurethane resin
- 2024-03-28 17:58:22
- admin
Protective film resin Automobile coating resin High resilience waterborne polyurethane resin 1.Typical properties Appearance: Milky white liquid Protective film resin Automobile coating resin Ph: 7.0-9.0 Automobile coating resin Solid content: 40±1% Charge: Anionic High resilience waterborne polyurethane resin Viscosity (25℃): 300-800cP Elongation (%): >200...
-
What is the formula of laminating glue
- 2024-04-10 17:39:00
- admin
1.There are many formulations of coated glue, and different formulations need to be determined according to the specific use. It generally includes basic glue, thickener, curing agent, auxiliaries and other ingredients. 2.Basic glue is the most important component of laminating glue, it can be selected according to different use requirements of different types, such as water-based, oily, dilu...
-
Why is the transparency of other people's composite film so good?Why?
- 2024-04-17 17:56:09
- admin
The transparency of composite film is very high, but in the composite processing of plastic film, the composite film often has problems such as insufficient transparency. So, what is the reason for affecting the transparency of the composite film? This article analyzes one by one for reference. Improper selection of adhesives: Such as the color of the adhesive itself is dark or the fluid...
-
How does resin produce crack effect
- 2024-04-26 17:38:50
- admin
First, material selection and preparation To make the resin crack effect, you first need to prepare the resin and pigment. Resin selection of high transparency, high hardness, wear resistance products, pigments can choose mineral pigments or metal pigments, you can also add a small amount of color pigments to prepare a rich color. Second, color mixing Mix the paint into the resin one by one and st...
-
PET label primer
- 2024-05-15 17:44:02
- admin
PET label primer Cost-effectively improve the printability of PET labels Excellent adhesion with PET label substrate Good affinity with all kinds of ink Good weather resistance, no yellowing Easy to use, safe and environmentally friendly PET label primer is a water-based coating designed to improve the printability of PET label paper with advanced material technology and formulation technology. Du...
-
OPP, PET card film, plastic sealing film primer | primer | adhesive | viscosifier
- 2024-05-16 17:07:10
- admin
The OPP,PET film substrate | is an environmentally friendly coating using advanced material technology, which can significantly enhance the adhesion of EVA on difficult PET substrates and improve the product quality of PE card film. Card film, also known as plastic film, is a plastic film product coated with adhesive and OPP and PET as the substrate, which is widely used in the storage and protect...
-
Water-based UV base oil for high adhesion paper products
- 2024-05-22 17:49:53
- admin
Enhance the adhesion of UV ink and UV varnish on paper products! The tape won't come off Fast drying speed to meet the needs of production line Good affinity with UV varnish and UV ink Excellent strength and toughness Water-based UV base oil for high adhesion paper products Anhui Sinograce Chemical waterborne UV primer for high adhesion paper products is a high-performance waterborne coa...