Categories
new blog
◆ The procedure of bonding process:◆ The adhesive surface should be evenly coated to ensure infiltration, as far as possible to avoid bubbles, due to the porosity of the adhesive strength greatly reduced, resulting in degumming.Attention should be paid to the alignment of the position, not staggered, can be pressurized, air exclusion, make it close contact. Time is three important parameters of cu...
The chemical composition of glue, the polymer in the water environment glue (vinyl acetate in white glue is a kind of petroleum derivatives) are round particles, the radius of the general particle is between 0.5~5μm.The bonding of objects is achieved by the tension between the polymers in the glue.In the glue, water is the carrier of the polymer, and the water carries the polymer slowly into ...
Color material gives printing rich and colorful colors,Connecting material as the carrier of color, also as a binder to make the color fixed on the substrate surface; Fillers give the ink the appropriate properties, so that the ink to meet the printing process of printing suitability.Ink should have a certain fluidity, and meet the requirements of the nature of various printing processes, can be q...
As the composition of waterborne UV curing ink china-africa photosensitivity, pigment and absorb UV light initiator competition, to a great extent, it affected the curing characteristics of the UV curing system in the system Due to the pigments can absorb part of the radiation energy, it will affect the light initiator for the absorption of light, and, in turn, affect the ability to gene...
First, pour the glue on the flat glass to observe its rheology, and wiggle it to observe its rheology,If the flow of glue is too fast, it means that the glue is too thin and poor, and too thick is not conducive to bonding. Secondly, with a hand dip to observe its viscosity if you can slowly draw, a little sticky hand is better. Then, pour it on a small piece of glass to observe its film forming ti...
Waterborne Acrylic Resin Product Description: The water-based acrylic resin is made of acrylic acid and acrylate monomer through solution polymerization. Product purpose: This product can be used for water-based aluminum foil gloss and ink, water-based gravure printing paper gloss and ink, water-based carton ink manufacturing Product features:alcohol water as the main solvent, has no smell, no tox...
Water-based ink is composed of resin (water-soluble resin colloidal dispersion emulsion polymer) aqueous amine (mainly ammonia) pigment (organic pigment inorganic pigment) and additives.The so-called water-based ink is mainly water as a solvent by scientific processing, compared with other printing ink, water-based ink, because it does not contain volatile toxic organic solvents, so in the printin...
Plastic film as the object of packaging printing, many kinds, and the use of printing also involves many aspects, so the variety of this kind of ink is extremely wide.In particular, this ink shall have the characteristics of fastness to adhesion printing effect processing tolerance and other requirements.The surface of plastic film is smooth, and the ink can not be permeated, so it must be printed...
Water-based flexible printing ink is made of water-soluble pigment and water-based additives by a series of process grinding.Flexo water-based ink is suitable for printing various plastic woven bags, plastic handbags, non-woven bags, paper labels, kraft paper bags, corrugated paper, etc.It is non-toxic and odor free, it is not only environmental protection and safety but also can save 30% of the p...
Water-based adhesive is a one-component pressure sensitive adhesive of self-crosslinking acrylic ester at room temperature. It has adhesion to wood, PVC, metal, glass board and so on. It is suitable for wood skin, OPP tape, double-sided tape, aluminum foil tape and self-adhesive trademark paper. performance index Composition: acrylic polymer Solid composition: 55% 2 Viscosity: 6000 CPS/25 Crosslin...
Pigment is a white or colored fine powder substance which is generally insoluble in water, oil and solvents (some pigments are soluble), but can be evenly dispersed in water.Pigment and film forming material solution mixed on the surface of the material, can form a covering ability of various colors of the paint layer in wood products coating or finishing process, pigment has three functions. It i...
The difference between water-based gravure printing ink and other printing methods mainly lies in: its printing plate through corrosion or engraving, the formation of a lot of plate surface of different volumes of concave hole, known as the ink hole.The ink hole volume is large, the amount of ink filling in the printing process is large, and the ink layer thickness is transferred to the substrate....
The peeling protective coating is a liquid protective coating made of waterborne polyurethane, which can be sprayed on the surface of automobiles, furniture, electrical appliances and other objects as a protective coating.It has good formativity, can in complex shape surface to form a layer of continuous, uniform stick, strength, transparent protective coating, no need baking, room tempe...
Water-based adhesives have various kinds and different properties, which can adapt to the trend of environmental protection. The important properties of water-based adhesive are: solid content (non-volatile mass percentage), viscosity, emulsifier or surfactant total agent dosage, surface tension, pH value, particle size and distribution, film forming temperature, mechanical stability, etc.Com...
All staff of Sinograc Chemical went rafting in Huoshan. We had a great time and had a happy holiday. I hope everyone was as happy as us.
Compared with traditional glue, water-based coated glue is made of imported raw materials, with high solid content, low viscosity, good process applicability, strong adhesive force, non-toxic and other advantages are suitable for aluminum foil (OPA), pretreated polyethylene (HDPE,LDPE), polypropylene (OPP, CPP), polyester (PET), polyamide (PA,ONY) film, A two-component solvent-based polyurethane a...
sinograce chemical
Sinograce Chemical is professional technical enterprise providing solutions of surface materials and manufacturing of raw materials. Sinograce Chemical Company is composed of R&D center, Manufacture center, Quality control department, Market center and International trade department. We have been dedicating to research on excellent paint/coating, adhesive for over 15 years. And now still conti...
Room 1013, Building A5, Financial Port Center, Yangzijiang Road, Baohe District, Hefei City， Anhui province, China
+86 0551 63459511
Copyright © 2015-2025 Anhui Sinograce Chemical Co., Ltd..All Rights Reserved.powered by dyyseo.com
top
English
français
русский
español
العربية