Categories
Composition of pressure sensitive tape 1.Pressure sensitive adhesive, 2.substrate 3.Primer 4.Back treatment agent 5.Isolation paper The main components of the pressure sensitive adhesive and resin, including rubber such as polyacrylic acid ester or polyvinyl ether, homogeneous base material requirements, small scale and good to solvent invasive, including, (1) fabric such as cotton, glass cloth or...
Surface treatment of metal materials 1)metal material surface degreasing: organic solvent degreasing alkali degreasing electric degreasing ultrasonic degreasing 2)metal material surface derusting 3)Activation treatment of metal surface 4)Metal surface sandblasting treatment: increase the surface roughness Surface treatment of non-metallic materials 1)Mechanical treatment: sandpaper grinding, etc 2...
First, pour the glue on the flat glass to observe its rheology, and wiggle it to observe its rheology,If the flow of glue is too fast, it means that the glue is too thin and poor, and too thick is not conducive to bonding. Secondly, with a hand dip to observe its viscosity if you can slowly draw, a little sticky hand is better. Then, pour it on a small piece of glass to observe its film forming ti...
The bonding effect can be achieved by applying pressure for a short time (non-aqueous solvent heating) It overcomes the solvent volatilization and drying time needed during the operation of structural adhesive, and can improve the working environment After stripping, it can be corrected without contamination and can be reused for many times Easy to operate, can greatly improve the production effic...
1.Permanent and removable options In terms of the performance of adhesives, they can be divided into two categories: permanent adhesives and removable adhesives.(Permanent is generally used in electronic machinery, such as electronic label, typical: mobile phone battery label, removable is generally used in food, personal care, such as: wet wipes label, fruit label, clothing label, etc.) 2.The sur...
Water-based adhesive is a one-component pressure sensitive adhesive of self-crosslinking acrylic ester at room temperature. It has adhesion to wood, PVC, metal, glass board and so on. It is suitable for wood skin, OPP tape, double-sided tape, aluminum foil tape and self-adhesive trademark paper. performance index Composition: acrylic polymer Solid composition: 55% 2 Viscosity: 6000 CPS/25 Crosslin...
Polyurethane sealant is widely used in civil construction, transportation and other industries: Applications in construction - filling and sealing of doors and Windows, glass, etc.; Applications in civil engineering - caulking sealing of expressways, Bridges and airstrips; Automotive applications - Assembly and sealing of Windows (mainly windshield). Polyurethane sealant has many excellent charact...
Automobile seal strip is one of the important parts of the automobile, widely used in doors, Windows, body, seats, sunroof, engine case and trunk and other parts, with waterproof, sealing, sound insulation, dust, antifreeze, shock absorption, heat preservation and energy saving important role.The rubber flocking seal occupies a very important position in the automobile seal system. The rubber floc...
Introduction Of Electrostatic Flocking Electrostatic flocking is widely used and popular in industrially developed countries, such as the United States, Italy, Germany and Japan, because of its unique decorative effect of suede and embroidery, as well as its simple process, low cost and strong adaptability.In recent years, a variety of electrostatic flocking products have also been developed...
Water-based adhesives have various kinds and different properties, which can adapt to the trend of environmental protection. The important properties of water-based adhesive are: solid content (non-volatile mass percentage), viscosity, emulsifier or surfactant total agent dosage, surface tension, pH value, particle size and distribution, film forming temperature, mechanical stability, etc.Com...
Compared with traditional glue, water-based coated glue is made of imported raw materials, with high solid content, low viscosity, good process applicability, strong adhesive force, non-toxic and other advantages are suitable for aluminum foil (OPA), pretreated polyethylene (HDPE,LDPE), polypropylene (OPP, CPP), polyester (PET), polyamide (PA,ONY) film, A two-component solvent-based polyurethane a...
Pressure sensitive adhesive in addition to the adhesive, but also to add adhesive and other auxiliary substances. 1.The adhesive of the pressure sensitive adhesive has rubber or synthetic resin and other materials, its role is to give the adhesive layer enough cohesion strength and adhesion, the dosage is 30%-50%. 2.Viscosifier. Viscosifier rosin and its derivatives, petroleum resin, etc., it...
Now, people's environmental awareness is getting stronger and stronger, and many glue manufacturers are also seeking to transform themselves. Some water-based glue or oil-based glue are produced. Today, we will take water-based glue and oil-based glue as an example to talk about the difference between them. First, the difference between water-based glue and oily glue The first difference is that t...
Water-based single-component protective film adhesive is an environmentally friendly adhesive prepared by using natural polymer or synthetic polymer as adhesive and water as solvent or dispersant instead of toxic organic solvents that pollute the environment.Existing water-based adhesives are not 100% solvent-free and may contain limited volatile organic compounds as additives to their water-based...
Sixteen common types of self-adhesive labels This paper introduces sixteen types of self-adhesive labels commonly seen in daily life. The specific types of self-adhesive labels are as follows： 1. Press smooth writing paper and offset paper labels Multi-purpose label paper for information labels, bar code printing labels, especially suitable for high speed laser printing, also suitable fo...
Water-based glue, when the autumn and winter season, special attention should be paid to anti-freezing treatment, according to different temperatures, the implementation of different solutions. Cautions (1) Pay attention to warmth and anti-freezing when transporting glue: when transporting below 0℃, pay attention to the warmth of the vehicle, and transport below -5℃ is prohibited; (2) Ke...
sinograce chemical
Sinograce Chemical is professional technical enterprise providing solutions of surface materials and manufacturing of raw materials. Sinograce Chemical Company is composed of R&D center, Manufacture center, Quality control department, Market center and International trade department. We have been dedicating to research on excellent paint/coating, adhesive for over 15 years. And now still conti...
Room 1013, Building A5, Financial Port Center, Yangzijiang Road, Baohe District, Hefei City， Anhui province, China
+86 0551 63459511
Copyright © 2015-2024 Anhui Sinograce Chemical Co., Ltd..All Rights Reserved.powered by dyyseo.com
top
English
français
русский
español
العربية