• 2026-06-05 18:37:46
• admin

BOPP, PP, OPP, and PE films are widely used in flexible packaging, labels, and decorative applications due to their transparency, chemical resistance, and stable processing properties. However, printing on these films isn’t always straightforward. A printed surface may look fine initially, but problems can appear during tape tests, rewinding, die-cutting, or transport. Ink may peel, scratch, or lo...

• Water-based top coating
• BOPP ink adhesion
• Film surface treatment

• 2026-07-22 18:56:18
• admin

When formulating a water-based acrylic pressure-sensitive adhesive for labels, Tg is usually one of the first parameters we set. It indicates whether the dry adhesive film will behave relatively soft or firm at a given temperature and influences initial tack, peel adhesion, holding power, low-temperature performance and adhesive ooze. However, Tg alone does not determine whether an adhesive is sui...

• pressure sensitive adhesive Tg
• removable label adhesive formulation
• label adhesive Tg

• 2026-08-21 17:00:20
• admin

A good hot stamping result depends on more than the foil it self. The adhesive layer affects transfer quality, edge definition, adhesion, drying, and storage stability. When selecting a water-borne adhesive for hot stamping foil production, start with three points: the substrate, the coating process, and the stamping temperature. Check the Substrate Hot stamping foil may be used on paper, OPP, PET...

• PolyurethaneAdhesive
• Adhesive for Hot Stamping Foil
• modified polyurethane adhesive