Categories
new blog
Whether the water-based film adhesive meets the quality requirements of composite products, in addition to the quality of the glue itself, but also related to the paper, film, equipment accuracy, operating experience and other supporting factors in the film coating process, after long-term practice, we summarized the common problems in the application of water-based film adhesive, and put forward ...
Common problem Cause Solution The middle part of the compound bubbles Add dry oil when brushing Dry and then recombine The amount of glue is too small Increase glue Film or print surface contamination or excessive dusting Dedusting The overflow on the surface of the rubber roller is not removed, causing the mucous membrane to empty Cleaning glue roller The pressure is too small, and the ...
Aluminized film glue is a composite material that binds aluminum film and other materials together by glue. It is usually used in paper packaging to prevent moisture, oxidation, heat insulation and pollution. First of all, the aluminized film glue can effectively prevent the paper from absorbing moisture and oxygen in the air, thereby maintaining the dryness and freshness of the product and extend...
As a kind of widely used adhesive, coated adhesive has a variety of processes. Here are some of the common processes used: 1. Hot melt coating: hot melt coating is to place a layer of film on the surface of the print, and then through hot pressing the film and the print together.In this process, the laminating glue is heated to turn it into a liquid, which then forms a uniform coating between the ...
1. The effect of membrane material There are dust adsorption, particle impurities, poor plasticization and other crystal points in the film. The moisture absorption on the film surface of the material and the precipitation of additives in the material will cause composite bubbles. The thickness of the film should be as uniform as possible, if the distribution is uneven, it is easy to cause the imb...
Brand :Sinograce Type: Water base adhesive Appearance：Milky white emulsion with blue light Performance and use:This product is suitable for the coating of BOPP film, PET film and printed color paper (dry coating process). High bonding q degree, large tension compound drying speed, good parallel flow; For gold and silver cardboard, single powder paper bonding q degree, tension q, to avoid the...
First, the choice of self-adhesive printing raw materials When selecting raw materials, we must choose high-quality self-adhesive materials with qualified physical and chemical indexes, rather than products with expired or unstable physical and chemical indexes. Although the latter price is low, but due to the unstable quality of such materials, large consumption in each process, and even lead to ...
After the ink is stored for a period of time, the upper part of the ink appears thin in the container, the viscosity is small, and the color and concentration are relatively poor; The lower part is thick, the viscosity is large, and the color and concentration are also relatively good. Intaglio printing inks are thin and have a small viscosity, because the pigment is poorly dispersed in the connec...
What is a peelable resin? Strippable resin is a special resin material with strippable properties (also known as removable film resin). It is often used in the preparation of protective films for electronic products, packaging of semiconductor devices, etc., which can protect these products more intact, and it is easy to peel off when it needs to be replaced or disassembled. When prepari...
Protective film resin Automobile coating resin High resilience waterborne polyurethane resin 1.Typical properties Appearance： Milky white liquid Protective film resin Automobile coating resin Ph： 7.0-9.0 Automobile coating resin Solid content： 40±1% Charge： Anionic High resilience waterborne polyurethane resin Viscosity (25℃)： 300-800cP Elongation (%)： >200...
Aqueous matte resin matte aliphatic aqueous polyurethane dispersion is a high performance solvent-free anionic aliphatic matte aqueous polyurethane, dull, soft to touch, with excellent hydrolysis resistance, heat resistance and bending resistance. Product performance Appearance Milky liquid Application With excellent flexibility and adhesion, it can be used alone or mixed with other em...
The performance requirements of water-based varnish for printing paper glazing are as follows: 1.The film has good environmental resistance. Some of the printed matter after glazing is used to make all kinds of packaging cartons, in order to be able to play a good protective effect on the packaged products, the environmental resistance of the glazing film layer must be better. For example, the pac...
Ink scraping is not clean troubled many manufacturers, there are ten reasons for scraping is not clean, save it for use! 1.Ink viscosity is too high When the viscosity of the ink increases, the surface tension also increases correspondingly, and the force between them also increases, so that the scraper will increase the impact force of the ink on the scraper in the contact process with the ink, d...
PET label primer Cost-effectively improve the printability of PET labels Excellent adhesion with PET label substrate Good affinity with all kinds of ink Good weather resistance, no yellowing Easy to use, safe and environmentally friendly PET label primer is a water-based coating designed to improve the printability of PET label paper with advanced material technology and formulation technology. Du...
Paper ink absorption is not only related to the degree of porosity and capillary state of the paper, but also related to the surface properties of the paper fiber, the content of fillers, pigments, adhesives, ink composition and characteristics, printing methods, printing pressure and other factors. In actual printing, the absorption of ink by paper can be divided into two stages. The first stage ...
Many people see that a lot of Teflon coatings used in industry are green, especially when used in molds, let's talk about the reasons. The use of coating characteristics In extrusion or die casting products, generally dark, for example, rubber, silicone and so on, if the coating is made of dark, then whether the coating falls off is more difficult to see. Therefore, made of light color and with br...
sinograce chemical
Sinograce Chemical is professional technical enterprise providing solutions of surface materials and manufacturing of raw materials. Sinograce Chemical Company is composed of R&D center, Manufacture center, Quality control department, Market center and International trade department. We have been dedicating to research on excellent paint/coating, adhesive for over 15 years. And now still conti...
Room 1013, Building A5, Financial Port Center, Yangzijiang Road, Baohe District, Hefei City， Anhui province, China
+86 0551 63459511
Copyright © 2015-2025 Anhui Sinograce Chemical Co., Ltd..All Rights Reserved.powered by dyyseo.com
top
English
français
русский
español
العربية