Categories
As an important material for printing, ink is composed of resin, pigment, filler and auxiliary. Due to many industries such as books, packaging, construction, and circuit boards, with the gradual increase in social demand, the use of ink is also increasing. However, in the production and use of ink, due to the addition of surfactants, equipment stirring operation and environmental changes will cau...
The high adhesion base coating improves the adhesion of the inkjet coating on PP paper Prevent ink from penetrating into PP composite paper substrate Fast drying speed to meet the needs of production line Good weather resistance, no yellowing Easy to use, safe and environmentally friendly Anhui sinograce company's PP composite paper digital inkjet coating adhesive base | Inkblot coating base ...
Many people think that the temperature of the primer baking (dry) of Teflon paint is not important, just bake it, in fact, this is a misunderstanding. If you usually encounter the following situations, please carefully bake the primer. For the primer coating of Teflon paint, we recommend a temperature of 150 ° C, after the workpiece reaches 150 ° C, bake for 5-10 minutes. I. If the temperature of ...
Aqueous acrylic emulsion is a kind of chemical raw material with strong function and excellent performance, which is widely used in many fields such as coating, ink, textile, papermaking and waterproofing. This emulsion is mainly composed of pure acrylic monomer, which is prepared by precise copolymerization, and its non-toxic and pollution-free characteristics make it popular. I.Physica...
The difference between nitrile rubber and nitrile latex Different raw materials Carboxyl nitrile latex: butadiene, acrylonitrile and methacrylic acid Carboxyl nitrile butadiene latex (XNBRL) is a terpolymer of butadiene, acrylonitrile and acrylic acid or methacrylic acid, and is a modified variety of nitrile butadiene latex. Due to the introduction of carboxyl group, while containin...
Compared with natural latex, the commonality of synthetic latex lies in its excellent storage stability, mechanical stability, chemical stability and freeze-thaw stability during storage and application. The characteristics of different kinds of synthetic latex are as follows: Styrene-butadiene latex Butadiene series latex is a copolymer latex synthesized mainly by butadiene and styrene monomer. B...
Styrene-butadiene rubber latex is a kind of copolymer emulsion obtained by emulsion polymerization with butadiene and styrene as monomers or main monomers. Ordinary styrene butadiene latex Carboxylic butadiene-styrene latex Bufedipine latex There are many varieties of styrene-butadiene latex, according to the different types of raw materials can be divided into ordinary styrene-butadiene late...
This product uses butadiene, Acrylonitrile as the main raw materials, through emulsion polymerization of anionic polymer dispersion, can be used to produce disposable medical examination gloves, with excellent elongation and tensile strength The product is an environmentally friendly product, free of formaldehyde, APEO, NPEO and other harmful substances, and has excellent elongation, tensile stren...
Glove PU coating refers to coating the outer layer of gloves with a layer of polyurethane (PU) material. This coating has a variety of functions, mainly including: Oil and chemical resistance: makes the gloves suitable for work environments where oils and chemicals need to be handled. Anti-slip and wear resistance: Enhances the stability of the gloves in wet or greasy environments, reduces the ris...
In the formulation of water-based paint, the choice of emulsion raw material is the most important decision for the engineer. The main properties of the paint are determined by the resin. There are a wide variety of water-based acrylate emulsions, including polystyrene-acrylate emulsions, which are mixed in the market. The different composition of water-based acrylate resin has great influence on ...
Particle size and hydrolysis resistance: The stability of the emulsion is closely related to the particle size and hydrolysis resistance of the polyurethane particles. The smaller the particle size, the better the stability of the emulsion. The poor hydrolysis resistance will cause the emulsion to degrade slowly during the storage process, produce carboxyl group, reduce pH value, and make the emul...
The world's coating variety structure is developing in the direction of reducing VOC, and water-based coating is one of the development directions. The proportion of traditional solvent-based coatings in China has gradually declined, and the development speed of water-based coatings is also very fast, but the low-grade varieties of polyvinyl alcohol still account for a large proportion. When choos...
Acrylic emulsion polymers are widely used in coating printing, electrostatic flocking, fabric lamination, warp sizing and coating processing, etc. Different types of acrylate with various properties also have their own different applications due to the differences in raw materials and ratios used. Common characteristics of oleic acid emulsion Outstanding adhesion: The polymer struct...
Introduction to Acrylic Emulsion: Acrylic emulsion is a high-molecular water-based dispersion system prepared by emulsion polymerization technology using styrene and acrylate monomers (such as methyl acrylate, ethyl acrylate, butyl acrylate, etc.). Its features include environmental friendliness (low VOC), good film-forming property, strong weather resistance, excellent adhesion, and performa...
SA-218 is a new type of general-purpose emulsion specially designed and developed for multi-color coatings. It has good versatility and can be used as a multi-color continuous phase or a multi-color base paint. It features small particle size, high transparency, and the stability of the protective colloid without easy thickening. Scope of application styrene acrylic emulsion It is s...
Acrylic emulsion has extensive applications in the construction industry, mainly due to its excellent performance and diverse application scenarios. The main uses and characteristics of acrylic emulsion in construction are as follows: 1. Application Acrylic emulsion is mainly used for waterproofing, anti-corrosion and beautification treatment of building materials. Its properties enable it to be w...
sinograce chemical
Sinograce Chemical is professional technical enterprise providing solutions of surface materials and manufacturing of raw materials. Sinograce Chemical Company is composed of R&D center, Manufacture center, Quality control department, Market center and International trade department. We have been dedicating to research on excellent paint/coating, adhesive for over 15 years. And now still conti...
Room 1013, Building A5, Financial Port Center, Yangzijiang Road, Baohe District, Hefei City， Anhui province, China
+86 0551 63459511
Copyright © 2015-2025 Anhui Sinograce Chemical Co., Ltd..All Rights Reserved.powered by dyyseo.com
top
English
français
русский
español
العربية