• 2026-06-24 17:17:23
• admin

A fabric coating may look smooth after drying but develop cracks, whitening or peeling when the material is stretched or folded. In many cases, the problem comes from the balance between film hardness, adhesion and elasticity. The film is too hard A hard coating film can provide good surface strength, but it may not be flexible enough for stretch fabrics. When the fabric moves, the coating must mo...

• elastic acrylic binder for fabric
• textile coating resin
• flexible acrylic polymer emulsion

• 2026-07-03 17:12:10
• admin

Adjusting a water-based acrylic resin formulation is rarely as simple as adding one new material. For example, increasing resin hardness may make the coating film more brittle. Reducing the glass transition temperature can improve low-temperature film formation, but it may also reduce heat resistance and blocking resistance. Increasing the amount of hydrophilic groups may improve emulsion stabilit...

• water-based acrylic resin
• acrylic resin modification
• water-based acrylic emulsion

• 2026-08-05 17:59:28
• admin

Choosing a water-based resin should begin with the application, not with viscosity, solids content, or price. Products with similar technical data can behave very differently in production. A resin may work well on paper but show weak adhesion on plastic film. A coating may form properly under heated drying but remain tacky at room temperature. A low-viscosity polyurethane dispersion may look too ...

• water-based resin
• Polyurethane dispersions
• Acrylic emulsions

• 2026-08-21 17:00:20
• admin

A good hot stamping result depends on more than the foil it self. The adhesive layer affects transfer quality, edge definition, adhesion, drying, and storage stability. When selecting a water-borne adhesive for hot stamping foil production, start with three points: the substrate, the coating process, and the stamping temperature. Check the Substrate Hot stamping foil may be used on paper, OPP, PET...

• PolyurethaneAdhesive
• Adhesive for Hot Stamping Foil
• modified polyurethane adhesive