Categories
new blog
Feature 1.Non viscous: almost all substances are not bonded with PTFE coating. Very thin films also show good non-adhesion properties. 2.Heat resistance: PTFE coating has excellent heat and low temperature resistance characteristics. Short time can withstand high temperature to 300℃, generally between 240℃~260℃ can be used continuously, with significant thermal stability, it can work at ...
Product Overview The product is made of sol-gel process, with inorganic nano sol as binder, with inorganic high temperature resistant pigments and functional inorganic fillers, cured by heating, to produce a ceramic like inorganic coating film.The main components of the coating film are Si(silicon), O (oxygen), A1 (aluminum), Ti (titanium) and so on. The coating film has high hardness, delicate fe...
The appearance of non-stick pan provides conditions for healthy cooking with less oil, and also makes cooking utensils more convenient to clean. However, in the non-stick frying pan into life at the same time, the safety of its coating has never been questioned.There are two main coating processes for non-stick frying pans: one is the traditional coating process, Teflon coating (PTFE); The second ...
Water-based single-component protective film adhesive is an environmentally friendly adhesive prepared by using natural polymer or synthetic polymer as adhesive and water as solvent or dispersant instead of toxic organic solvents that pollute the environment.Existing water-based adhesives are not 100% solvent-free and may contain limited volatile organic compounds as additives to their water-based...
Sixteen common types of self-adhesive labels This paper introduces sixteen types of self-adhesive labels commonly seen in daily life. The specific types of self-adhesive labels are as follows： 1. Press smooth writing paper and offset paper labels Multi-purpose label paper for information labels, bar code printing labels, especially suitable for high speed laser printing, also suitable fo...
Classification and characteristics of screen-printable pressure sensitive adhesives I.Characteristics and performance requirements of screen printing process Screen printing is through a certain pressure to make the printing base material through the holes of the plate to the substrate, the formation of an image or text. In order to achieve good printing adaptability, the physical properties of sc...
Sinograce Chemical is professional technical enterprise providing solutions of surface materials and manufacturing of raw materials. On January 16, 2023, Sinograce Chemical held a year-end work summary meeting and a New Year party. Sinograce Chemical wishes all customers a happy New Year and a better and better New Year.
Waterborne polyurethane: A new type of polyurethane system using water instead of organic solvent as dispersion medium, also known as water dispersed polyurethane, water polyurethane or water based polyurethane. Oily polyurethane: polyurethane system with organic solvent as dispersion medium, polyurethane system with thermoplastic linear structure. Distinguish by appearance Waterborne polyurethane...
Water-based coating is an effective means to process the surface of printed matter, to improve the gloss and strength of the surface of printed matter, enhance the aesthetic effect, temperature resistance, water resistance, wear resistance, improve the grade of printed matter and commodity value. Therefore, to measure the quality of the coating, it is also necessary to examine the brightness, stre...
Preparation method of waterborne acrylic emulsion 1.The preparation of water-based acrylic emulsion: the raw materials including acrylic hard monomer, acrylic soft monomer and acrylic functional monomer all acrylic monomer, emulsifier, water added to the pre-emulsifying kettle, emulsifying 30 ~ 40min.A non-stratified emulsion is obtained. Then the remaining water, remaining emulsifier and buffer a...
Acrylic resin is made of acrylic ester and methacrylate and other alene monomers copolymerization resin, through the selection of different resin structure, different formula, production process and solvent composition, can be synthesized different types, different performance and different application of acrylic resin, Acrylic resin can be divided into thermoplastic acrylic resin and thermosettin...
Self-adhesive labels are ubiquitous in our daily life, and are necessary consumables for many manufacturers. However, the warping Angle of self-adhesive labels has been troubling many manufacturers. A small warping Angle will directly affect the beauty of the products, leading to their own products are not favored from the visual point of view. So, why will self-adhesive warping Angle? How to deal...
"Non-stick pan" is a very common pot in the kitchen, because in the process of using less oil consumption, less smoke, but also not easy to paste the problem, so it is welcomed by many people. In recent years, however, there have been more and more controversies about non-stick pans: Some people think that non-stick coating will produce toxic substances, can not be used for a long time; Some peopl...
1. the reason why non-stick pot is not stick, all rely on the coating material on the surface of the pot. These coating materials have good lubricity, small friction coefficient, small surface tension, food is not easy to stick to the pot.Two types of coating materials are commonly used for nonstick pans: fluoropolymers, such as teflon, and silicone polymers. Non-stick wok use PFOA-free high quali...
ater Based Polyurethane Peelable Protective Coating PU-207 is a protective resin made of waterborne polyurethane base material with advanced technology. The water-based peeling paint made from this is bright in color, fine and uniform in particle size, coating on the surface of automobiles, furniture, electrical appliances and other objects as a protective coating, has good protecti...
1.The role of acrylic resins in photocured inks.Acrylic resin is widely used in the manufacture of photocuring inks because of its unsaturated property and polymerization reaction under the action of ultraviolet light.It and other substances, such as polyether, carbamate, polyester, epoxy resin, modified epoxy resin, poly caprolactam copolymer, can be used as a photocuring ink resin component. 2.T...
sinograce chemical
Sinograce Chemical is professional technical enterprise providing solutions of surface materials and manufacturing of raw materials. Sinograce Chemical Company is composed of R&D center, Manufacture center, Quality control department, Market center and International trade department. We have been dedicating to research on excellent paint/coating, adhesive for over 15 years. And now still conti...
Room 1013, Building A5, Financial Port Center, Yangzijiang Road, Baohe District, Hefei City， Anhui province, China
+86 0551 63459511
Copyright © 2015-2025 Anhui Sinograce Chemical Co., Ltd..All Rights Reserved.powered by dyyseo.com
top
English
français
русский
español
العربية