Categories
new blog
1. acrylic water-based paint The use of acrylic emulsion as the main component, the main feature is good adhesion, will not deepen the color of wood, but the wear resistance and chemical resistance is poor, the film hardness is soft, fullness is poor, comprehensive performance in general, film Good construction is easy to produce defects. It is suitable for water-based wood primer, matte finish. B...
March 10, 2018,Anhui sinograce Chemical Co., Ltd held an event launching ceremony of “2018 Orange War” in Hefei Big Shu mountain.
Sinograce Chemical holds the 2018 employee games at the cultural and sports activities center on July 2, 2018.More than 80 people from six teams took part in the competition. It consists of three events: tug-of-war, table tennis and badminton. In the competition, each team elaborately arranged, strives for success, on the field fully displays each special strength and the ball skill.Off the f...
September 1, 2018,Anhui sinograce Chemical Co., Ltd held an event launching ceremony of “The third Orange War”.
Waterborne polyurethanes are mostly milky white. The whole process of waterborne polyurethane can be divided into two stages. The first stage is pre-stepwise polymerization, that is, the oligomeric diol, the chain extender, the water-based monomer and the diisocyanate are progressively polymerized through the solution to produce an aqueous polyurethane prepolymer having a molecular mass of the ord...
The exterior wall stone paint of the building is really natural, after the paint is dry,it is like a real stone, and the colors are warm and natural, and the color is fresh and nice. Perhaps a lot of friends, for this anti-stone coating is not very understanding, so,will inevitably feel very strange, then this material really have these advantages? In fact, this anti-stone coating not only has the...
Analysis on the application of waterborne polyurethane (WPU) in coatings Waterborne polyurethane is used in water based wood coatings, which is expected to obtain excellent film hardness, heat resistance and dielectric properties, and good film-forming properties. The higher the degree of microphase separation of aqueous polyurethane,the greater the difference of softening temperature, the better ...
Colorful paint is mainly used in imitation stone effect, so also known as liquid stone and the horizon exterior paint.is composed of incompatible two-phase components, one of the dispersion medium for the continuous phase, the other phase for the dispersed phase. Painting, through a one-time spray, you can get luxury, beautiful, colorful patterns. The pattern formed by the one-time spraying is com...
1.Energy conservation: Water in water multicolor coating, pure water-based formula, excellent raw material technology.Granite stone, depending on nature, the development of powerful resources have some damage to the ecological. Water covered with colorful paint to solve this problem, and decorative curtain wall color can be artificially controlled, energy saving and environmental protection,commen...
Water-in-water multi-color paint spray guns to use most of the spray, for the operation, but also because of the improper use of the gun caused by uneven distribution of the coating,the following together to see how to solve it. The smaller the gun distance, the greater the pressure of the spray, the greater the impact of the product by the pressure of the water, water-in-watercolorful paint coati...
Phenomenon : Part of the water-based paint film from the primer uplift, which contains gas or liquid, showed uneven distribution. Cause 1.When the water-based paint is applied, the dry water-based paint film is exposed to rain. 2.Apply a water-based paint primer to the wet substrate. 3.Water - based paint film is affected by acid - base and heat. Amelioration 1.Considering the gas phase conditions...
Common problem of lacquer of waterborne woodwork: varnish besmear film is not level off, burnish is not even Phenomenon : Wood is filled with putty hole processing, after sealing the bottom, coating brush varnish, coating film flatness is low, luster is not uniform. Cause : Hole putty poor quality, loose, solvent absorption. The wood fiber and pith ray on the wood surface are relatively loose. The...
Water - based wood paint common problems: gloss wood paint uneven luster Phenomenon There is light coating on the wood surface, coating film gloss, some areas of low gloss. Cause The wood fiber and pith ray in cork are loose with the growth of growth rings, the base material infiltrates excessively, the coating film increases the pigment volume concentration due to the decrease of the base ma...
Asked by water-based paint experts: water-based wood lacquer wood grain display is not clear enough Question: Our company is now doing the first coat of wood lacquer and tried a water-based resin (polyurethane). and there is no problem with the adhesion.The current problem is that after adding color essence, it is applied to the floor and the wood grain display is not clear enough. The amount of t...
Asked by water-based paint experts: water-based paints appear flocculated in the production process Problem: Our company produced a batch of waterborne paint last week. The formula remains unchanged. After the completion of production, the coating appears a mass flocculent,it is difficult to remove the filtration, the quality of waterborne coating is reduced. What is the cause? What method c...
How to solve the water - based acrylic paint back adhesion problem? - ask a water-based paint expert Problem: How to solve the water - based acrylic paint back adhesion problem? Water - based acrylic paint back adhesion is a problem often encountered by water - based paint formulators.In order to solve the problem of water - based acrylic paint adhesion, we must fundamentally unders...
Copyright © 2015-2025 Anhui Sinograce Chemical Co., Ltd..All Rights Reserved.powered by dyyseo.com
top