Categories
new blog
Classification and characteristics of screen-printable pressure sensitive adhesives I.Characteristics and performance requirements of screen printing process Screen printing is through a certain pressure to make the printing base material through the holes of the plate to the substrate, the formation of an image or text. In order to achieve good printing adaptability, the physical properties of sc...
Classification and characteristics of screen-printable pressure sensitive adhesives Ⅱ Classification of screen-printable pressure sensitive adhesives Because of the simple screen printing equipment, convenient operation, simple printing, plate making and low cost, for the application of coating pressure sensitive adhesive, also often consider the use of screen printing process to coating.The ...
Screen printing UV pressure sensitive adhesive and screen printing water-based pressure sensitive adhesive, has the following different characteristics: because UV curable pressure sensitive adhesive does not contain water or organic solvent, so it can be cured without heating drying channel, and water-based pressure sensitive adhesive to water as diluent, need a lot of heat to volatilizing water;...
1.Excellent adhesion The polymer structure of water-based acrylic emulsion contributes to the flow and wettability of molecular chains on the substrate surface, making the coating and substrate molecules in close contact, to achieve high adhesion. 2.High load-bearing capacity of the makeup filler can significantly reduce the cost Waterborne acrylic emulsion has excellent fillability, the total sol...
1. the reason why non-stick pot is not stick, all rely on the coating material on the surface of the pot. These coating materials have good lubricity, small friction coefficient, small surface tension, food is not easy to stick to the pot.Two types of coating materials are commonly used for nonstick pans: fluoropolymers, such as teflon, and silicone polymers. Non-stick wok use PFOA-free high quali...
Acrylic acid Important organic synthesis raw materials and synthetic resin monomer Acrylic resin is an important organic synthesis raw material and synthetic resin monomer, is a very fast polymerization rate of ethylene monomer.Is the simplest unsaturated carboxylic acid, consisting of a vinyl group and a carboxylic group. Most of them are used to manufacture methyl acrylate, ethyl ester, butyl es...
Application Acrylic emulsion is a kind of emulsion with wide applicability for construction. It can be used as a new chemical material for repairing steel structure concrete of hydraulic construction, port construction, highway, bridge, metallurgical chemical industry (urea chloro gangue) and other industrial civil buildings, such as seepage prevention, corrosion prevention and antifreeze. Cl...
The addition of wetting dispersant has obvious effect on the foam of some water-based ink.For example, polyacrylic acid wetting dispersants foam more than other types of wetting dispersants.Generally speaking, wetting dispersant foam with low dispersion capacity is also less. If diisobutyl sulfonate is based on disate, there is little foam at its content of 0.1-0.25%. The use of thickeners will ma...
Water-based viscosifying emulsion plays a very important role in water-based acrylic pressure sensitive adhesive, which can improve the bonding strength and initial adhesion of pressure sensitive adhesive on high and low energy surfaces, so as to achieve the best balance point, and can improve the application range and grade of pressure sensitive products. Today, we will take you to understan...
Water based adhesive Water-based adhesive refers to the water-soluble polymer dissolved into appropriate concentration of aqueous solution, or insoluble polymer dispersed into micro-particles (emulsion) in water with the help of surfactant in the general term of adhesives;In simple terms, adhesives made of materials that can be dispersed or dissolved in water are aqueous adhesives and are often re...
First: Teflon coating introduction Industrial Teflon coating is suitable for plastic rubber mold, ball mold, glove mold, latex mold, roller, conveyor belt, mechanical parts and other surface treatment, containing "FEP" and "PTFE" polytetrafluoroethylene ingredients with high-performance resin, divided into the bottom coating and surface coating a total of two layers, has the best anti-corrosion, h...
Pressure sensitive adhesive (PSA) is a self-adhesive material, only need to apply a small pressure, can form a van der Waals force on the surface of the two objects, and the adhesive is firmly bonded, this pressure sensitive bonding performance is its basic feature, is also different from other adhesives typical characteristics. PSA can be divided into solution type, emulsion type, photocuring typ...
Surfactants play the role of wetting, dispersing, emulsifying and solutizing in pesticide processing, and have become one of the indispensable components of pesticide preparations, and are often called auxiliaries, emulsifiers, dispersants, auxiliary agents, etc., they can be a combination of a variety of surfactants.At present, pesticide formulations are developing in the direction of waterborne,...
Water-based pressure-sensitive adhesive is a type of adhesive that uses water as a solvent and is pressure-sensitive, that is, it can adhere quickly to the surface when slight pressure is applied. Due to its environmental protection, non-toxic, cost-effective, adjustable viscosity and other advantages, it has gradually become the mainstream product in the pressure sensitive adhesive market. Accord...
Advantages and disadvantages of the same type of defoamer Organic defoamer such as mineral oils, amides, low alcohols, fatty acids, fatty acid esters and phosphate esters has been studied and applied earlier, belonging to the first generation of defoamer, which has the advantages of easy access to raw materials, high environmental performance and low production cost.The disadvantages are low defoa...
sinograce chemical
Sinograce Chemical is professional technical enterprise providing solutions of surface materials and manufacturing of raw materials. Sinograce Chemical Company is composed of R&D center, Manufacture center, Quality control department, Market center and International trade department. We have been dedicating to research on excellent paint/coating, adhesive for over 15 years. And now still conti...
Room 1013, Building A5, Financial Port Center, Yangzijiang Road, Baohe District, Hefei City， Anhui province, China
+86 0551 63459511
Copyright © 2015-2025 Anhui Sinograce Chemical Co., Ltd..All Rights Reserved.powered by dyyseo.com
top
English
français
русский
español
العربية