Categories
new blog
The resins that can be used for water-based gravure inks are acrylic resin, polyurethane resin, alkyd resin, etc. Each resin has different characteristics and application occasions, and needs to be selected according to the actual situation. First, water-based gravure ink overview Water-based gravure ink is an environmentally friendly ink, compared with traditional ink, its volatility is small, no...
What is a peelable resin? Strippable resin is a special resin material with strippable properties (also known as removable film resin). It is often used in the preparation of protective films for electronic products, packaging of semiconductor devices, etc., which can protect these products more intact, and it is easy to peel off when it needs to be replaced or disassembled. When prepari...
Protective film resin Automobile coating resin High resilience waterborne polyurethane resin 1.Typical properties Appearance： Milky white liquid Protective film resin Automobile coating resin Ph： 7.0-9.0 Automobile coating resin Solid content： 40±1% Charge： Anionic High resilience waterborne polyurethane resin Viscosity (25℃)： 300-800cP Elongation (%)： >200...
The main difference is that the nature is different, the production process is different, and the characteristics are different, as follows: First, the nature is different 1.Flexo printing Flexo printing is a direct printing method known as flexo printing because of the use of elastic, raised image plates. 2.Gravure printing Gravure refers to gravure printing, first the printing plate on the exces...
1.There are many formulations of coated glue, and different formulations need to be determined according to the specific use. It generally includes basic glue, thickener, curing agent, auxiliaries and other ingredients. 2.Basic glue is the most important component of laminating glue, it can be selected according to different use requirements of different types, such as water-based, oily, dilu...
The performance requirements of water-based varnish for printing paper glazing are as follows: 1.The film has good environmental resistance. Some of the printed matter after glazing is used to make all kinds of packaging cartons, in order to be able to play a good protective effect on the packaged products, the environmental resistance of the glazing film layer must be better. For example, the pac...
The transparency of composite film is very high, but in the composite processing of plastic film, the composite film often has problems such as insufficient transparency. So, what is the reason for affecting the transparency of the composite film? This article analyzes one by one for reference. Improper selection of adhesives: Such as the color of the adhesive itself is dark or the fluid...
Ink scraping is not clean troubled many manufacturers, there are ten reasons for scraping is not clean, save it for use! 1.Ink viscosity is too high When the viscosity of the ink increases, the surface tension also increases correspondingly, and the force between them also increases, so that the scraper will increase the impact force of the ink on the scraper in the contact process with the ink, d...
Water-based ink is referred to as ink, and flexible water-based ink is also known as liquid ink, which is mainly made of water-soluble resins, organic pigments, solvents and related additives by composite grinding processing. Water-based ink is especially suitable for tobacco, wine, food, beverages, medicines, children's toys and other packaging and printing products with strict sanitary condition...
PET label primer Cost-effectively improve the printability of PET labels Excellent adhesion with PET label substrate Good affinity with all kinds of ink Good weather resistance, no yellowing Easy to use, safe and environmentally friendly PET label primer is a water-based coating designed to improve the printability of PET label paper with advanced material technology and formulation technology. Du...
The OPP,PET film substrate | is an environmentally friendly coating using advanced material technology, which can significantly enhance the adhesion of EVA on difficult PET substrates and improve the product quality of PE card film. Card film, also known as plastic film, is a plastic film product coated with adhesive and OPP and PET as the substrate, which is widely used in the storage and protect...
Paper ink absorption is not only related to the degree of porosity and capillary state of the paper, but also related to the surface properties of the paper fiber, the content of fillers, pigments, adhesives, ink composition and characteristics, printing methods, printing pressure and other factors. In actual printing, the absorption of ink by paper can be divided into two stages. The first stage ...
1.Ink The three primary color inks have different degrees of color bias, which will affect the color bias of the whole picture to different degrees. However, a small amount of color bias can be corrected from the ink preparation. When printing to grasp the gray balance of the ink used, the same amount of yellow, product, green do not produce neutral gray, they produce lighter, more turbidity with ...
①The residual ink is converted into gray black ink According to the principle of color science, the complementary color of the ink mixed together, its hue will become gray black (red + green, yellow + blue-purple). Therefore, we can use this principle to deploy the complementary ink into gray-black ink by deploying the special color ink, and add it to the black ink in a certain proportion to use i...
Pigment is the main component of ink, is a fine powder-like solid colored substance, can show ball, flake and other irregular shape. Generally, the diameter of pigment particles is in the range of several hundred nanometers to tens of microns (10-7~10-5m). The pigment can be evenly dispersed in the medium, but it is insoluble in the medium and does not react with the medium. Pigment is a colored b...
Aluminum foil can also be printed with water-based ink. As a non-absorbent substrate, aluminum foil poses a major challenge to water-based ink printing. However, some aluminum foil products that require food-grade printing cannot be printed with oil-based inks, so water-based inks have become the best choice. However, due to the poor absorption of aluminum foil to water-based ink, many inexperienc...
sinograce chemical
Sinograce Chemical is professional technical enterprise providing solutions of surface materials and manufacturing of raw materials. Sinograce Chemical Company is composed of R&D center, Manufacture center, Quality control department, Market center and International trade department. We have been dedicating to research on excellent paint/coating, adhesive for over 15 years. And now still conti...
Room 1013, Building A5, Financial Port Center, Yangzijiang Road, Baohe District, Hefei City， Anhui province, China
+86 0551 63459511
Copyright © 2015-2026 Anhui Sinograce Chemical Co., Ltd..All Rights Reserved.
top
English
français
русский
español
العربية