Categories
new blog
Waterborne paint testing and standards:hardness Hardness is one of the most important physical properties of a coating. Coating hardness reflects the coating's ability to resist constant dents, scratches, scribes, and penetrations caused by a hard object. Testing the hardness of materials with different methods will give different results because the testing methods are for different amounts of ma...
Water based polyurethane resin refers to a binary colloidal system in which a polyurethane resin is dissolved or dispersed in water.Water-based polyurethane resin has the advantages of easy to use, stable performance, strong adhesion, excellent gloss, good heat resistance, etc. It can be suitable for various printing methods, especially suitable for screen printing, plastic packaging and composite...
Development trend of waterborne polyurethane: Nowadays, with the stricter requirements of environmental protection policies, the environmental protection requirements for the performance of adhesives will become higher and higher. Therefore, the greening and environmental protection of composite materials will be more and more important. There will be even more urgency.Therefore, the points mentio...
Precautions for using two-component polyurethane adhesives 1.Before applying the adhesive, the surface of the adherend must be clean, dry and free of grease. 2.The resin and curing agent should be mixed in the required ratio. 3.When scraping the glue, please try to scrape it carefully as it has a defoaming effect. 4.Store adhesive in (> 10, <50 * C) and dry place 5.Run out of the mixed glue ...
Polyurethane and general epoxy products application The use of the two products requires strengthened compressive tensile cement floors or floors and drainage ditches that are resistant to corrosion by strong acids and alkalis, such as chemicals, metallurgical plants, electroplating plants, power plants, pharmaceutical plants, PCB circuit board plants, paper mills, Hardware factory, printing and d...
Glass fiber is an important reinforcing material for the manufacture of fiber reinforced plastics (FRP), and is also used for weaving high temperature resistant fiber cloth.But the glass fiber that has not been treated is brittle, easy to take static electricity after friction, and the surface is smooth, when making the reinforcing material of the resin is not easy to stick with the resin.In the m...
1.The cause of a back adhesion： (1)the paste itself anti-viscosity, especially in the wet weather easy to stick back; (2)After the printing is completed, it is packaged without perfect heat treatment; (3)adjust the slurry formula is not appropriate, adding too much transparent slurry easy to cause back adhesion; (4)transport or storage conditions are not good, in high temperature, high humidity co...
One, extinction principle General can be divided into physical extinction and chemical extinction.Physical matting, is the addition of matting agent, so that the coating in the film when the uneven surface, reduce reflection and achieve low gloss. Two, the kind of matting agent Coating common matting agent can be divided into organic matting agent and inorganic matting agent two categories. 1.Orga...
The choice of solvent In the printing ink manufacturing process, in consideration of the overall solvent system of the ink volatility, to improve the printing ink solvent release and reduce the solvent organic solvent residue, the use of solvents are often several volatile mixed solvents.In the printing ink manufacturing process, the main organic solvents are toluene, butanone, cyclohexanone, ethy...
In February 2020, during the severe situation of covid-19, Sinograce Chemical company dared to assume social responsibilities and made a modest contribution to the fight against covid-19. It donated alcohol and 84 disinfectant and other epidemic prevention materials to hefei primary and secondary schools and universities for daily disinfection of schools, with a total of 10 tons of 84 di...
Anhui Sinograce Chemical Co., Ltd Polyurethane condoms, known as condoms, are made of polyurethane condoms, similar to latex condoms. Polyurethane was applied to condom production in Japan, until the emergence of China's Nakagawa 001, which broke Japan's monopoly on the production field. Because the common latex condoms on the market are thicker and polyurethane has good ...
Printing mucilage requirements The requirements of printing mucilage for manual plate printing Manual table printing is to press the screen on the fabric of the table for manual scraping, and the pressure extrusion on the scraper will print the glue through the mesh hole of the pattern part to the fabric. The shear stress of the binder is small, so thePrinting mucilageis required to have good...
Solvent selection In the printing ink manufacturing process, considering the overall solvent system of the volatile ladder, improve the printing ink solvent release and reduce printing solvent organic solvent residue, the solvent used is often a mixture of several volatile solvents. In the printing ink manufacturing process, the main organic solvents are toluene butyl ketone cyclohexanone ethyl ac...
On January 26, 2022, SINOGRACE Chemical Co., Ltd. will hold the year-end summary meeting and annual convention, and wish everyone a happy New Year.
With the development of The Times, many products in the production of nano coating, the coating can be very good protection from water and air substances invasion, the use of nano coating can obtain what characteristics, let us know about it. 1.Features The hardness of the coating is extremely high, which is more than 3 times that of tool and die steel, even more than 4000HV(ceramic characteristic...
Food packaging is divided into ordinary packaging and high-performance packaging, the corresponding waterborne polyurethane adhesive can be divided into four categories: general use, steaming boiling, transparent cooking, aluminum foil cooking.Usually such adhesives are two-component solvent-based polyurethane adhesives, the main agent is polyether or polyester polyol After the aromatic isocyanate...
sinograce chemical
Sinograce Chemical is professional technical enterprise providing solutions of surface materials and manufacturing of raw materials. Sinograce Chemical Company is composed of R&D center, Manufacture center, Quality control department, Market center and International trade department. We have been dedicating to research on excellent paint/coating, adhesive for over 15 years. And now still conti...
Room 1013, Building A5, Financial Port Center, Yangzijiang Road, Baohe District, Hefei City， Anhui province, China
+86 0551 63459511
Copyright © 2015-2025 Anhui Sinograce Chemical Co., Ltd..All Rights Reserved.powered by dyyseo.com
top
English
français
русский
español
العربية