• 2026-04-23 15:31:36
• admin

Many people find themselves torn when selecting materials: since both are used for coatings, which one offers greater durability? Which is the more suitable choice for waterproofing during renovation? In reality, neither possesses an absolute advantage over the other; the key lies in the specific requirements of the application scenario. Today, we will clarify the core distinctions between the two...

• polyurethane rubber
• polyurethane dispersion
• acrylic polymer

• 2026-05-09 10:53:05
• admin

Removable adhesive labels are widely used in modern packaging, product identification and temporary labeling applications. Unlike permanent labels, removable labels can be applied firmly during use and removed cleanly when needed, helping brands improve product presentation, user experience and packaging flexibility. In many industries, removable labels are required not only to provide clear infor...

• removable pressure sensitive adhesive
• removable label adhesive
• removable adhesive for labels

• 2026-07-16 15:53:46
• admin

Waterborne polyurethane dispersions, commonly known as PUDs, may appear milky white, translucent, or slightly bluish in the liquid state. This difference is mainly related to particle size, particle size distribution, and how strongly the dispersed particles scatter visible light. In general, milky dispersions scatter more light, while finer dispersions allow more light to pass through. However, a...

• PUD
• polyurethane dispersions
• waterborne polyurethane

• 2026-07-22 18:56:18
• admin

When formulating a water-based acrylic pressure-sensitive adhesive for labels, Tg is usually one of the first parameters we set. It indicates whether the dry adhesive film will behave relatively soft or firm at a given temperature and influences initial tack, peel adhesion, holding power, low-temperature performance and adhesive ooze. However, Tg alone does not determine whether an adhesive is sui...

• pressure sensitive adhesive Tg
• removable label adhesive formulation
• label adhesive Tg

• 2026-08-05 17:59:28
• admin

Choosing a water-based resin should begin with the application, not with viscosity, solids content, or price. Products with similar technical data can behave very differently in production. A resin may work well on paper but show weak adhesion on plastic film. A coating may form properly under heated drying but remain tacky at room temperature. A low-viscosity polyurethane dispersion may look too ...

• water-based resin
• Polyurethane dispersions
• Acrylic emulsions

• 2026-08-11 18:51:37
• admin

As global environmental regulations such as EU REACH and OEKO-TEX® Standard 100 become increasingly stringent, traditional solvent-based PU systems face growing restrictions in protective glove manufacturing. With advantages such as low VOC emissions and no DMFa residue, waterborne polyurethane (WPU) emulsions are rapidly becoming a key choice for glove manufacturers transitioning from solvent...

• waterborne polyurethane dispersion
• industrial glove coating
• WPU for gloves

• 2026-08-21 17:00:20
• admin

A good hot stamping result depends on more than the foil it self. The adhesive layer affects transfer quality, edge definition, adhesion, drying, and storage stability. When selecting a water-borne adhesive for hot stamping foil production, start with three points: the substrate, the coating process, and the stamping temperature. Check the Substrate Hot stamping foil may be used on paper, OPP, PET...

• PolyurethaneAdhesive
• Adhesive for Hot Stamping Foil
• modified polyurethane adhesive