Categories
new blog
◆ The procedure of bonding process:◆ The adhesive surface should be evenly coated to ensure infiltration, as far as possible to avoid bubbles, due to the porosity of the adhesive strength greatly reduced, resulting in degumming.Attention should be paid to the alignment of the position, not staggered, can be pressurized, air exclusion, make it close contact. Time is three important parameters of cu...
The chemical composition of glue, the polymer in the water environment glue (vinyl acetate in white glue is a kind of petroleum derivatives) are round particles, the radius of the general particle is between 0.5~5μm.The bonding of objects is achieved by the tension between the polymers in the glue.In the glue, water is the carrier of the polymer, and the water carries the polymer slowly into ...
Composition of pressure sensitive tape 1.Pressure sensitive adhesive, 2.substrate 3.Primer 4.Back treatment agent 5.Isolation paper The main components of the pressure sensitive adhesive and resin, including rubber such as polyacrylic acid ester or polyvinyl ether, homogeneous base material requirements, small scale and good to solvent invasive, including, (1) fabric such as cotton, glass cloth or...
Surface treatment of metal materials 1)metal material surface degreasing: organic solvent degreasing alkali degreasing electric degreasing ultrasonic degreasing 2)metal material surface derusting 3)Activation treatment of metal surface 4)Metal surface sandblasting treatment: increase the surface roughness Surface treatment of non-metallic materials 1)Mechanical treatment: sandpaper grinding, etc 2...
First, pour the glue on the flat glass to observe its rheology, and wiggle it to observe its rheology,If the flow of glue is too fast, it means that the glue is too thin and poor, and too thick is not conducive to bonding. Secondly, with a hand dip to observe its viscosity if you can slowly draw, a little sticky hand is better. Then, pour it on a small piece of glass to observe its film forming ti...
The bonding effect can be achieved by applying pressure for a short time (non-aqueous solvent heating) It overcomes the solvent volatilization and drying time needed during the operation of structural adhesive, and can improve the working environment After stripping, it can be corrected without contamination and can be reused for many times Easy to operate, can greatly improve the production effic...
1.Permanent and removable options In terms of the performance of adhesives, they can be divided into two categories: permanent adhesives and removable adhesives.(Permanent is generally used in electronic machinery, such as electronic label, typical: mobile phone battery label, removable is generally used in food, personal care, such as: wet wipes label, fruit label, clothing label, etc.) 2.The sur...
Water-based adhesive is a one-component pressure sensitive adhesive of self-crosslinking acrylic ester at room temperature. It has adhesion to wood, PVC, metal, glass board and so on. It is suitable for wood skin, OPP tape, double-sided tape, aluminum foil tape and self-adhesive trademark paper. performance index Composition: acrylic polymer Solid composition: 55% 2 Viscosity: 6000 CPS/25 Crosslin...
Printing pressure has a great influence on printing quality.Maintaining an average and constant printing pressure in the effective printing area can not only make the printing ink uniform, small color difference, but also keep the size of the printing mark.It is feasible to achieve maximum flat flat printing printing pressure But because it is the manufacturing precision of printing plate flatness...
Polyurethane sealant is widely used in civil construction, transportation and other industries: Applications in construction - filling and sealing of doors and Windows, glass, etc.; Applications in civil engineering - caulking sealing of expressways, Bridges and airstrips; Automotive applications - Assembly and sealing of Windows (mainly windshield). Polyurethane sealant has many excellent charact...
Automobile seal strip is one of the important parts of the automobile, widely used in doors, Windows, body, seats, sunroof, engine case and trunk and other parts, with waterproof, sealing, sound insulation, dust, antifreeze, shock absorption, heat preservation and energy saving important role.The rubber flocking seal occupies a very important position in the automobile seal system. The rubber floc...
Home textiles Flocking sand release fabric pattern unique, rich color, soft breathable, especially in winter than leather sofa warmer and more comfortable.Electrostatic flocking cloth bed cover has a three-dimensional sense, full of characteristics, electrostatic flocking curtain color, texture thick, soft, shading from sunlight.Color pattern of flocking wallboard can be designed at will according...
Water-based adhesives have various kinds and different properties, which can adapt to the trend of environmental protection. The important properties of water-based adhesive are: solid content (non-volatile mass percentage), viscosity, emulsifier or surfactant total agent dosage, surface tension, pH value, particle size and distribution, film forming temperature, mechanical stability, etc.Com...
All staff of Sinograc Chemical went rafting in Huoshan. We had a great time and had a happy holiday. I hope everyone was as happy as us.
Compared with traditional glue, water-based coated glue is made of imported raw materials, with high solid content, low viscosity, good process applicability, strong adhesive force, non-toxic and other advantages are suitable for aluminum foil (OPA), pretreated polyethylene (HDPE,LDPE), polypropylene (OPP, CPP), polyester (PET), polyamide (PA,ONY) film, A two-component solvent-based polyurethane a...
Due to the printing speed is too fast, add too much, high hardness of tap water, ink solvent surface tension size is different, excessive circulation stirring and other reasons lead to the production of foam, ink texture is uniform to ensure printing quality, bubble is destroyed uniformity, will reduce production efficiency.After the foam overflow in the tank, the foam flows into the roller, wet t...
sinograce chemical
Sinograce Chemical is professional technical enterprise providing solutions of surface materials and manufacturing of raw materials. Sinograce Chemical Company is composed of R&D center, Manufacture center, Quality control department, Market center and International trade department. We have been dedicating to research on excellent paint/coating, adhesive for over 15 years. And now still conti...
Room 1013, Building A5, Financial Port Center, Yangzijiang Road, Baohe District, Hefei City， Anhui province, China
+86 0551 63459511
Copyright © 2015-2025 Anhui Sinograce Chemical Co., Ltd..All Rights Reserved.powered by dyyseo.com
top
English
français
русский
español
العربية