Categories
new blog
Sixteen common types of self-adhesive labels This paper introduces sixteen types of self-adhesive labels commonly seen in daily life. The specific types of self-adhesive labels are as follows： 1. Press smooth writing paper and offset paper labels Multi-purpose label paper for information labels, bar code printing labels, especially suitable for high speed laser printing, also suitable fo...
Classification and characteristics of screen-printable pressure sensitive adhesives I.Characteristics and performance requirements of screen printing process Screen printing is through a certain pressure to make the printing base material through the holes of the plate to the substrate, the formation of an image or text. In order to achieve good printing adaptability, the physical properties of sc...
Waterborne polyurethane: A new type of polyurethane system using water instead of organic solvent as dispersion medium, also known as water dispersed polyurethane, water polyurethane or water based polyurethane. Oily polyurethane: polyurethane system with organic solvent as dispersion medium, polyurethane system with thermoplastic linear structure. Distinguish by appearance Waterborne polyurethane...
Water based polyurethane is a kind of block copolymer containing soft segment and hard segment. The soft segment is composed of oligomer polyols, and the hard segment is composed of polyisocyanate and chain extender. It has excellent wear resistance, oil resistance, low temperature resistance, aging resistance and chemical resistance.At present, the water based polyurethane emulsion on the market ...
Polyurethane (PU) is a kind of organic polymeric compounds containing repeated carbamate group (NHCOO) in the main chain.Polyurethane polymer materials have the advantages of wear resistance, high temperature resistance, good adhesion, easy processing, low price, but some polyurethane water resistance, heat resistance is poor, need to be modified by specific methods, in order to achieve the purpos...
Preparation method of waterborne acrylic emulsion 1.The preparation of water-based acrylic emulsion: the raw materials including acrylic hard monomer, acrylic soft monomer and acrylic functional monomer all acrylic monomer, emulsifier, water added to the pre-emulsifying kettle, emulsifying 30 ~ 40min.A non-stratified emulsion is obtained. Then the remaining water, remaining emulsifier and buffer a...
Acrylic resin is made of acrylic ester and methacrylate and other alene monomers copolymerization resin, through the selection of different resin structure, different formula, production process and solvent composition, can be synthesized different types, different performance and different application of acrylic resin, Acrylic resin can be divided into thermoplastic acrylic resin and thermosettin...
Polyurethane adhesive is a kind of high-grade adhesive, with excellent flexibility, impact resistance, chemical resistance, wear resistance, and the most important is its low temperature resistance. Because of its series of advantages, polyurethane adhesives are widely used in the following fields. 1. Carpentry industry With the improvement of people's awareness of environmental protection, the wo...
Polyurethane (polyurethanes, abbreviated PU) is a kind of polymer with -NHCOO-repeat structural unit as the main chain. Isocyanate (monomer) is polymerized with a hydroxyl compound.Due to the strong polarity of the carbamate group, insoluble in non-polar groups, with good oil resistance, toughness, wear resistance, aging resistance and adhesion. Materials suitable for a wide temperature range (-50...
Polyurethane is the short form of polyurethane (PU). It is a block polymer formed by addition polymerization. It is a polymer compound with flexible and elastic polyether or polyester as soft segment and rigid and hard carbamate as hard segment. It contains a considerable number of ammonia ester bonds. Waterborne polyurethane has been successfully applied in the textile printing and dyeing industr...
The addition of wetting dispersant has obvious effect on the foam of some water-based ink.For example, polyacrylic acid wetting dispersants foam more than other types of wetting dispersants.Generally speaking, wetting dispersant foam with low dispersion capacity is also less. If diisobutyl sulfonate is based on disate, there is little foam at its content of 0.1-0.25%. The use of thickeners will ma...
Water - based ink is also known as water - based (oil) ink, referred to as ink.Water-based ink is made of water-soluble or water-dispersed polymer resin, colorant, surfactant and other related additives through chemical process and physical processing. Water - based ink containing a small amount of alcohol water as solvent, ink stability.Therefore, it is especially suitable for food, medicine and ...
Environmental protection pressure has prompted some traditional solvent-based products to gradually withdraw from the market and replace them with water-based, high solid content, powder products, etc.Waterborne polyurethane, as an important member of waterborne products, is facing unprecedented development opportunities with its unique excellent properties.In addition to the leather industry, it ...
1.Water as a dispersion medium, do not use organic solvents, non-toxic or flammable danger, is environmentally friendly products; 2.Acrylic monomers have many types, containing ester groups, carboxyl groups, hydroxyl groups and other functional groups have strong polarity, it is easy to emulsion copolymerization with other monomers such as vinyl acetate, styrene, vinyl chloride, etc., to make emul...
Surfactants play the role of wetting, dispersing, emulsifying and solutizing in pesticide processing, and have become one of the indispensable components of pesticide preparations, and are often called auxiliaries, emulsifiers, dispersants, auxiliary agents, etc., they can be a combination of a variety of surfactants.At present, pesticide formulations are developing in the direction of waterborne,...
The adhesive not only needs it to stick firmly, but also needs long-term viscosity, the effect of the adhesive is better, if it can not be sustained, after a period of time it will fall off, or for some reason, the viscosity will decline, so we sometimes need to think of some ways to ensure the durability of the viscosity. Research work and experience have shown that adhesives can bond things by i...
sinograce chemical
Sinograce Chemical is professional technical enterprise providing solutions of surface materials and manufacturing of raw materials. Sinograce Chemical Company is composed of R&D center, Manufacture center, Quality control department, Market center and International trade department. We have been dedicating to research on excellent paint/coating, adhesive for over 15 years. And now still conti...
Room 1013, Building A5, Financial Port Center, Yangzijiang Road, Baohe District, Hefei City， Anhui province, China
+86 0551 63459511
Copyright © 2015-2025 Anhui Sinograce Chemical Co., Ltd..All Rights Reserved.powered by dyyseo.com
top
English
français
русский
español
العربية