Categories
new blog
In gravure printing, ink resolubility is also a key indicator to test the performance of ink. Especially in the color ink printing, the moderate resolubility can not only make the color fully displayed, but also solve the problem of shallow plate mesh blocking and overprinting cross-color. In color ink printing, according to the different hue requirements, the depth of the ink hole mesh of the pri...
After the ink is stored for a period of time, the upper part of the ink appears thin in the container, the viscosity is small, and the color and concentration are relatively poor; The lower part is thick, the viscosity is large, and the color and concentration are also relatively good. Intaglio printing inks are thin and have a small viscosity, because the pigment is poorly dispersed in the connec...
In order to prevent ink delamination and pigment precipitation, users must be fully stirred before printing. The following summarizes the faults and elimination methods of screen printing ink in use for your reference. 1.Poor adhesion: the reason is improper selection of ink, insufficient pre-press treatment, impurities in the substrate, insufficient drying temperature, insufficient time, improper...
The resins that can be used for water-based gravure inks are acrylic resin, polyurethane resin, alkyd resin, etc. Each resin has different characteristics and application occasions, and needs to be selected according to the actual situation. First, water-based gravure ink overview Water-based gravure ink is an environmentally friendly ink, compared with traditional ink, its volatility is small, no...
With the development of the application of digital inkjet printing technology in the clothing industry, environmental monitoring is more stringent and the demand for small batch production and personalized customization is increasing. Therefore, the requirements for textile coating ink are becoming higher and higher, and the raw materials for the production of textile coating ink are bec...
1. Coatings field: Waterborne polyurethane is widely used in waterborne printing inks, wood coatings, metal coatings, automotive coatings, architectural coatings and other fields because of its small curing shrinkage rate, good acid and alkali resistance, wear resistance, weather resistance and chemical stability. 2. Adhesive field: Waterborne polyurethane adhesive has shear vi...
Protective film resin Automobile coating resin High resilience waterborne polyurethane resin 1.Typical properties Appearance： Milky white liquid Protective film resin Automobile coating resin Ph： 7.0-9.0 Automobile coating resin Solid content： 40±1% Charge： Anionic High resilience waterborne polyurethane resin Viscosity (25℃)： 300-800cP Elongation (%)： >200...
Aqueous matte resin matte aliphatic aqueous polyurethane dispersion is a high performance solvent-free anionic aliphatic matte aqueous polyurethane, dull, soft to touch, with excellent hydrolysis resistance, heat resistance and bending resistance. Product performance Appearance Milky liquid Application With excellent flexibility and adhesion, it can be used alone or mixed with other em...
The main difference is that the nature is different, the production process is different, and the characteristics are different, as follows: First, the nature is different 1.Flexo printing Flexo printing is a direct printing method known as flexo printing because of the use of elastic, raised image plates. 2.Gravure printing Gravure refers to gravure printing, first the printing plate on the exces...
Color paste, also known as pigment paste, is an important form of dye application, which is widely used in textile, ink, paint and other industries. In the classification of pastes, low-halogen pastes and ordinary pastes are two common types. They have certain differences in composition, performance and use, and the differences between the two types of pastes will be discussed in detail below. Fir...
The performance requirements of water-based varnish for printing paper glazing are as follows: 1.The film has good environmental resistance. Some of the printed matter after glazing is used to make all kinds of packaging cartons, in order to be able to play a good protective effect on the packaged products, the environmental resistance of the glazing film layer must be better. For example, the pac...
"If there are small bubbles in the complex, opaque and foggy, it will not only affect the appearance quality, but also affect the peeling strength of the complex, reducing it, which is a very bad phenomenon." 1.The surface tension of the base film is too small, the infiltration is poor, the glue is not uniform, and the space without glue is empty and bubbles are generated. The solution is to use a...
Ink scraping is not clean troubled many manufacturers, there are ten reasons for scraping is not clean, save it for use! 1.Ink viscosity is too high When the viscosity of the ink increases, the surface tension also increases correspondingly, and the force between them also increases, so that the scraper will increase the impact force of the ink on the scraper in the contact process with the ink, d...
First, material selection and preparation To make the resin crack effect, you first need to prepare the resin and pigment. Resin selection of high transparency, high hardness, wear resistance products, pigments can choose mineral pigments or metal pigments, you can also add a small amount of color pigments to prepare a rich color. Second, color mixing Mix the paint into the resin one by one and st...
Leather surface treatment agent Matte resin is a surface treatment agent, mainly used to add a matte effect to the leather surface. The principle is to form a layer of tiny particles on the surface of the leather material, and the refracted light is dispersed, making the surface appear matte. Automotive interior leather market demand analysis As a high-grade and beautiful material, leather has a w...
Water-based ink is referred to as ink, and flexible water-based ink is also known as liquid ink, which is mainly made of water-soluble resins, organic pigments, solvents and related additives by composite grinding processing. Water-based ink is especially suitable for tobacco, wine, food, beverages, medicines, children's toys and other packaging and printing products with strict sanitary condition...
sinograce chemical
Sinograce Chemical is professional technical enterprise providing solutions of surface materials and manufacturing of raw materials. Sinograce Chemical Company is composed of R&D center, Manufacture center, Quality control department, Market center and International trade department. We have been dedicating to research on excellent paint/coating, adhesive for over 15 years. And now still conti...
Room 1013, Building A5, Financial Port Center, Yangzijiang Road, Baohe District, Hefei City， Anhui province, China
+86 0551 63459511
Copyright © 2015-2025 Anhui Sinograce Chemical Co., Ltd..All Rights Reserved.powered by dyyseo.com
top
English
français
русский
español
العربية