• 2026-08-05 17:59:28
• admin

Choosing a water-based resin should begin with the application, not with viscosity, solids content, or price. Products with similar technical data can behave very differently in production. A resin may work well on paper but show weak adhesion on plastic film. A coating may form properly under heated drying but remain tacky at room temperature. A low-viscosity polyurethane dispersion may look too ...

• water-based resin
• Polyurethane dispersions
• Acrylic emulsions

• 2026-08-11 18:51:37
• admin

As global environmental regulations such as EU REACH and OEKO-TEX® Standard 100 become increasingly stringent, traditional solvent-based PU systems face growing restrictions in protective glove manufacturing. With advantages such as low VOC emissions and no DMFa residue, waterborne polyurethane (WPU) emulsions are rapidly becoming a key choice for glove manufacturers transitioning from solvent...

• waterborne polyurethane dispersion
• industrial glove coating
• WPU for gloves

• 2026-08-21 17:00:20
• admin

A good hot stamping result depends on more than the foil it self. The adhesive layer affects transfer quality, edge definition, adhesion, drying, and storage stability. When selecting a water-borne adhesive for hot stamping foil production, start with three points: the substrate, the coating process, and the stamping temperature. Check the Substrate Hot stamping foil may be used on paper, OPP, PET...

• PolyurethaneAdhesive
• Adhesive for Hot Stamping Foil
• modified polyurethane adhesive