Categories
new blog
As the saying goes, three-point paint, seven-point painting. For water-based coatings, especially for water-based wood coating in the home improvement market, the level of coating technology has a direct impact on product use. In order to let everyone better master the water-based paint technology, we specially launched the water-based paint coating process series this week. The substrate treatmen...
Paint of water-based paint - Waterborne wood paint application process 2 Before using the soft brush, thoroughly soak it in clean water, remove excess water, and do not drip. The enamel paint should only reach half the length of the bristles.Brush as fast as possible, gently and smoothly brush the wood grain, and do not apply it back and forth repeatedly. Because the water-based paint dries quickl...
1.The tool Before using the soft brush, thoroughly soak it in clean water, remove excess water, and do not drip. The enamel paint should only reach half the length of the bristles.Brush as fast as possible, gently and smoothly brush the wood grain, do not apply it back and forth repeatedly, because the water-based paint is fast drying and the opening time is short, so it should be completed as soo...
With the improvement of social progress and people's awareness of environmental protection, water-based ink in the field of packaging printing ink has attracted much attention.Water-based ink is more widely used in the fields of paper, food, medicine, packaging and printing because it has very low organic volatile matter (VOCs) and green environmental protection. However, in the field of gravure p...
As the composition of waterborne UV curing ink china-africa photosensitivity, pigment and absorb UV light initiator competition, to a great extent, it affected the curing characteristics of the UV curing system in the system Due to the pigments can absorb part of the radiation energy, it will affect the light initiator for the absorption of light, and, in turn, affect the ability to gene...
Finally, ordinary glue products, ordinary glue products have a certain elasticity and softness, and have a good tensile length but tensile strength and strength is not very large, adhesion welcome you to consult, this is our email sales@sinogracechem.com
Surfactants are a large group of organic compounds, their properties are very characteristic, application is extremely flexible, extensive, has great practical value. Surfactants have been as emulsifier, detergent, wetting agent, penetrating agent, foaming agent, solvent, dispersant, suspending agent, cement water reducing agent, fabric softener, leveling agent, fixing agent, fungicide, catalyst, ...
What is a coupling agent? Coupling agent is a class of substances with amphoteric structure, a part of their molecules coupling agent is a class of substances with amphoteric structure, a part of their molecules can be divided into groups and inorganic surface chemical groups reaction, forming chemical bonds; The groups can react with the chemical groups on the inorganic surface to form chemical b...
Compared with traditional glue, water-based coated glue is made of imported raw materials, with high solid content, low viscosity, good process applicability, strong adhesive force, non-toxic and other advantages are suitable for aluminum foil (OPA), pretreated polyethylene (HDPE,LDPE), polypropylene (OPP, CPP), polyester (PET), polyamide (PA,ONY) film, A two-component solvent-based polyurethane a...
Water-based single-component protective film adhesive is an environmentally friendly adhesive prepared by using natural polymer or synthetic polymer as adhesive and water as solvent or dispersant instead of toxic organic solvents that pollute the environment.Existing water-based adhesives are not 100% solvent-free and may contain limited volatile organic compounds as additives to their water-based...
Protective film glue transfer, there are a variety of factors, I believe that in the work, many teachers will also encounter a similar situation.The phenomenon of the so-called glue transfer is uneven coating or in the process of transportation, the glue shift remains on the surface of the profile, commonly known as glue transfer. Protective film glue transfer can be divided into the followin...
Anti -deformation power Anti -deformation capacity refers to a certain deformation after the composite product is affected by external forces, and this deformation will produce a certain amount of elasticity, especially the thin film. If the combination of composite is not enough to resist the elasticity of the return, foaming will occur, etc. Happening. There are many processes that produce defor...
Thirteen.Skinning There are two common skin phenomena: one is in the packaging bucket of glue surface skin, the other is in the glue tray surface skin. ■ The surface layer of glue in the packing bucket produces crusts 1)If the temperature of glue filtration packaging is too high, it is easy to form crust in the barrel when the temperature drops, which is common in high temperature in summer. Becau...
Screen printing UV pressure sensitive adhesive and screen printing water-based pressure sensitive adhesive, has the following different characteristics: because UV curable pressure sensitive adhesive does not contain water or organic solvent, so it can be cured without heating drying channel, and water-based pressure sensitive adhesive to water as diluent, need a lot of heat to volatilizing water;...
Water-based coating is an effective means to process the surface of printed matter, to improve the gloss and strength of the surface of printed matter, enhance the aesthetic effect, temperature resistance, water resistance, wear resistance, improve the grade of printed matter and commodity value. Therefore, to measure the quality of the coating, it is also necessary to examine the brightness, stre...
After the composite product has been cured at a certain temperature and time, the interlayer peeling composite film adhesive layer still has a certain viscosity, that is, after the composite film peeling, the two-layer film will be re-glued together by hand, and the severe drying of the composite film adhesive layer will directly affect the peeling strength of the composite film, while the slight ...
sinograce chemical
Sinograce Chemical is professional technical enterprise providing solutions of surface materials and manufacturing of raw materials. Sinograce Chemical Company is composed of R&D center, Manufacture center, Quality control department, Market center and International trade department. We have been dedicating to research on excellent paint/coating, adhesive for over 15 years. And now still conti...
Room 1013, Building A5, Financial Port Center, Yangzijiang Road, Baohe District, Hefei City， Anhui province, China
+86 0551 63459511
Copyright © 2015-2025 Anhui Sinograce Chemical Co., Ltd..All Rights Reserved.powered by dyyseo.com
top
English
français
русский
español
العربية