Categories
new blog
Acrylic pressure sensitive adhesive is a large range, PUR is one of them, most of the acrylic pressure sensitive adhesive is heated operation, can be reheated after bonding, is reversible.And PUR is wet reaction acrylic pressure sensitive adhesive, heating operation, after bonding and moisture in the air reaction, after the reaction is irreversible (that is, heating will not melt). So PUR is more ...
◆ The procedure of bonding process:◆ The adhesive surface should be evenly coated to ensure infiltration, as far as possible to avoid bubbles, due to the porosity of the adhesive strength greatly reduced, resulting in degumming.Attention should be paid to the alignment of the position, not staggered, can be pressurized, air exclusion, make it close contact. Time is three important parameters of cu...
Color material gives printing rich and colorful colors,Connecting material as the carrier of color, also as a binder to make the color fixed on the substrate surface; Fillers give the ink the appropriate properties, so that the ink to meet the printing process of printing suitability.Ink should have a certain fluidity, and meet the requirements of the nature of various printing processes, can be q...
Composition of pressure sensitive tape 1.Pressure sensitive adhesive, 2.substrate 3.Primer 4.Back treatment agent 5.Isolation paper The main components of the pressure sensitive adhesive and resin, including rubber such as polyacrylic acid ester or polyvinyl ether, homogeneous base material requirements, small scale and good to solvent invasive, including, (1) fabric such as cotton, glass cloth or...
As we all know, with the development of society, people attach importance to food safety and so on, label printing is greatly encouraged, and label has become comparable to packaging. The development of label has driven the development of label printing, and ink is the main medicine in label printing,In the field of label printing, ink can be generally divided into three categories, namely: water-...
(1)The labels on the market (especially film labels) mostly use screen printing and flexographic printing, which not only has a complex processing process, a long cycle, but also has poor timeliness. (2)In terms of product design, the selection of design scheme needs to be modified repeatedly, which is not only troublesome, but also costly (3)The traditional printing method to achieve variable dat...
The bonding effect can be achieved by applying pressure for a short time (non-aqueous solvent heating) It overcomes the solvent volatilization and drying time needed during the operation of structural adhesive, and can improve the working environment After stripping, it can be corrected without contamination and can be reused for many times Easy to operate, can greatly improve the production effic...
Waterborne polyurethane is often used in the preparation of waterborne coatings because of its excellent film formation and adhesion, excellent flexibility and wear resistance.However, water-based polyurethane dispersion contains a lot of surfactant, easy to produce bubbles, and because of the special properties of water-based polyurethane, it is necessary to use the characteristics of water-based...
Water-based ink is composed of resin (water-soluble resin colloidal dispersion emulsion polymer) aqueous amine (mainly ammonia) pigment (organic pigment inorganic pigment) and additives.The so-called water-based ink is mainly water as a solvent by scientific processing, compared with other printing ink, water-based ink, because it does not contain volatile toxic organic solvents, so in the printin...
Plastic film as the object of packaging printing, many kinds, and the use of printing also involves many aspects, so the variety of this kind of ink is extremely wide.In particular, this ink shall have the characteristics of fastness to adhesion printing effect processing tolerance and other requirements.The surface of plastic film is smooth, and the ink can not be permeated, so it must be printed...
Water-based flexible printing ink is made of water-soluble pigment and water-based additives by a series of process grinding.Flexo water-based ink is suitable for printing various plastic woven bags, plastic handbags, non-woven bags, paper labels, kraft paper bags, corrugated paper, etc.It is non-toxic and odor free, it is not only environmental protection and safety but also can save 30% of the p...
Self-adhesive label Is also called self-adhesive label material. It is a composite material made of paper film or other special materials, coated with adhesive on the back, and coated with silicon protective paper as the base paper.And after printing die - cutting and other processing into finished labels. Self-adhesive materials are usually printed and processed on the label linkage machine. The ...
The difference between water-based gravure printing ink and other printing methods mainly lies in: its printing plate through corrosion or engraving, the formation of a lot of plate surface of different volumes of concave hole, known as the ink hole.The ink hole volume is large, the amount of ink filling in the printing process is large, and the ink layer thickness is transferred to the substrate....
Product character Appearance：Milky white or dark blue gelatinous liquid Solid content : ≥41% PH: 7.0 to 8.0 Viscosity: 1200 ~ 1800 (MPA.s) Performance characteristic 1.Strippable protective coating is made of waterborne polyurethane, weather resistance 24 months, ice resistance, acid and alkali resistance. 2.Water based formula, odorless and tasteless, free of heavy metals and ...
The peeling protective coating is a liquid protective coating made of waterborne polyurethane, which can be sprayed on the surface of automobiles, furniture, electrical appliances and other objects as a protective coating.It has good formativity, can in complex shape surface to form a layer of continuous, uniform stick, strength, transparent protective coating, no need baking, room tempe...
The use of flocking glue is different from that of ordinary glue. General flocking process can be divided into three kinds: 1. Flocking box, according to the need of flocking products make it the size of the corresponding flocking box, then placed in the flocking box of villi, connected to the power supply, make the flocking box to form a strong magnetic field, when the product from the side wear ...
sinograce chemical
Sinograce Chemical is professional technical enterprise providing solutions of surface materials and manufacturing of raw materials. Sinograce Chemical Company is composed of R&D center, Manufacture center, Quality control department, Market center and International trade department. We have been dedicating to research on excellent paint/coating, adhesive for over 15 years. And now still conti...
Room 1013, Building A5, Financial Port Center, Yangzijiang Road, Baohe District, Hefei City， Anhui province, China
+86 0551 63459511
Copyright © 2015-2025 Anhui Sinograce Chemical Co., Ltd..All Rights Reserved.powered by dyyseo.com
top
English
français
русский
español
العربية