Categories
new blog
1. Water-based polyurethane pressure-sensitive adhesive for its environmentally friendly non-polluting characteristics, the future will become the ultimate direction of development of pressure-sensitive adhesive; cost slightly higher than the acrylic, generally used for relatively high-end industries. 2. Solvent-based pressure-sensitive adhesive as a result of a v...
Introduction: Water-based adhesives to water as a dispersion medium adhesive, is a major category of environmentally friendly adhesives. The solvent-based adhesive is a homogeneous system with organic solvents such as benzene and toluene as the dispersion medium. The water-based adhesive is a heterogeneous system with water as the dispersion medium. Classification: Water as a disper...
Sinograce Chemical holds the 2018 employee games at the cultural and sports activities center on July 2, 2018.More than 80 people from six teams took part in the competition. It consists of three events: tug-of-war, table tennis and badminton. In the competition, each team elaborately arranged, strives for success, on the field fully displays each special strength and the ball skill.Off the f...
The Selection of good quality water-based adhesive not only help to improve the production efficiency, but also to protect the appearance of the product quality. Such as widely used in the field of self-adhesive water-based pressure-sensitive adhesive, such as water-based pressure-sensitive adhesive which is widely used in the field of stickers. This adhesive has many advantages, it is particularl...
Waterborne polyurethanes are mostly milky white. The whole process of waterborne polyurethane can be divided into two stages. The first stage is pre-stepwise polymerization, that is, the oligomeric diol, the chain extender, the water-based monomer and the diisocyanate are progressively polymerized through the solution to produce an aqueous polyurethane prepolymer having a molecular mass of the ord...
Some of the traditional glue in the adhesion of a great advantage is good adhesion, and the efficiency is very low, the most important thing is relatively low cost, most are someorganic materials. Relatively speaking,the biggest advantage of water-based adhesive is green, the traditional glue is inorganic materials, so it is not very environmentally friendly, pollution is relatively large, water-b...
Analysis on the application of waterborne polyurethane (WPU) in coatings Waterborne polyurethane is used in water based wood coatings, which is expected to obtain excellent film hardness, heat resistance and dielectric properties, and good film-forming properties. The higher the degree of microphase separation of aqueous polyurethane,the greater the difference of softening temperature, the better ...
1.Energy conservation: Water in water multicolor coating, pure water-based formula, excellent raw material technology.Granite stone, depending on nature, the development of powerful resources have some damage to the ecological. Water covered with colorful paint to solve this problem, and decorative curtain wall color can be artificially controlled, energy saving and environmental protection,commen...
water-based resin | water-based industrial coating (a) water paint common problems Common problems with water-based lacquer wood paint: transparency, Color fullness of shade The complaint that often hears about paint of ability in water is paint of ability in water diapure is poor, cannot show the plump godliness of woodiness. In general, the transparency of water-based paint is determined by the ...
Water - based wood paint common problems: gloss wood paint uneven luster Phenomenon There is light coating on the wood surface, coating film gloss, some areas of low gloss. Cause The wood fiber and pith ray in cork are loose with the growth of growth rings, the base material infiltrates excessively, the coating film increases the pigment volume concentration due to the decrease of the base ma...
How to solve the poor adhesion of water-based paint after soaking in water? Problems: water-based acrylic resin, self-drying system,60 ℃ / 120 minutes after the bubble row down into the water, can use fingernail.But after taking out to wait for water to be able again, how should solve? Response: This test method is still very harsh.General water - based resins, acrylic acid, polyurethane or Self-c...
Asked by water-based paint experts: water-based wood lacquer wood grain display is not clear enough Question: Our company is now doing the first coat of wood lacquer and tried a water-based resin (polyurethane). and there is no problem with the adhesion.The current problem is that after adding color essence, it is applied to the floor and the wood grain display is not clear enough. The amount of t...
Water paint common problems: water paint viscosity deviation index The formulation and process of water based paint remain unchanged. However, the viscosity of the water based paint produced deviates from the index and is not within the control scope, for three reasons: 1.Water based paint raw material properties change. Changes such as filler particle size distribution, oil absorption volatile oi...
Ask the water-based paint expert -water-based glass paint appears prickly heat when baking Problem: I use water-based acrylic and amino resin to make the glass paint when baking prickly heat. The details are as follows: Temperature: 80 degrees Time: 2 minutes It was already smooth when it was put into the oven Flash dry for 10 minutes Has been changed to defoamer, leveling agent, solvent, no effec...
How to solve the water - based acrylic paint back adhesion problem? - ask a water-based paint expert Problem: How to solve the water - based acrylic paint back adhesion problem? Water - based acrylic paint back adhesion is a problem often encountered by water - based paint formulators.In order to solve the problem of water - based acrylic paint adhesion, we must fundamentally unders...
Baking performance of water-based glass paint - ask an expert for water-based paint. Question: I would like to ask about the water-based glass baking paint .Water has a boiling point of 100 degrees Celsius, so if you bake it at 140 degrees, it won't boil and bubble up and destroy the film. Right? Response: Water - based paint to balance the evaporation of water and film curing between the relation...
sinograce chemical
Sinograce Chemical is professional technical enterprise providing solutions of surface materials and manufacturing of raw materials. Sinograce Chemical Company is composed of R&D center, Manufacture center, Quality control department, Market center and International trade department. We have been dedicating to research on excellent paint/coating, adhesive for over 15 years. And now still conti...
Room 1013, Building A5, Financial Port Center, Yangzijiang Road, Baohe District, Hefei City， Anhui province, China
+86 0551 63459511
Copyright © 2015-2025 Anhui Sinograce Chemical Co., Ltd..All Rights Reserved.powered by dyyseo.com
top
English
français
русский
español
العربية