• 2026-07-03 17:12:10
• admin

Adjusting a water-based acrylic resin formulation is rarely as simple as adding one new material. For example, increasing resin hardness may make the coating film more brittle. Reducing the glass transition temperature can improve low-temperature film formation, but it may also reduce heat resistance and blocking resistance. Increasing the amount of hydrophilic groups may improve emulsion stabilit...

• water-based acrylic resin
• acrylic resin modification
• water-based acrylic emulsion

• 2026-07-10 13:22:24
• admin

Resin is the main film-forming component in printing ink. It influences pigment dispersion, adhesion, drying speed, gloss, flexibility and resistance. There is no universal resin for every ink. The right choice depends on the ink system, substrate, printing method and the conditions the printed product will face after printing. Quick Resin Selection Guide Ink typeCommon resin choicesMain advantage...

• printing ink resin
• resin for printing ink
• printing ink binder

• 2026-07-29 17:36:58
• admin

When UV ink comes off during a tape test, the primer is often blamed first. However, poor adhesion can also result from the film surface, contamination, incomplete primer drying or incorrect UV curing. Here, “adhesion promoter” refers to a primer applied before printing. No single grade is suitable for every plastic film. Choose the Primer by Substrate PET and BOPET films often benefit from a prim...

• BOPP printing primer
• UV ink adhesion promoter
• water-based UV ink primer