-
Warmly congratulate Anhui sinograce Chemical to participate in the exhibition to a complete success
- 2017-08-30 14:58:54
- admin
-
Warmly congratulate Anhui sinograce Chemical to participate in the exhibition to a complete success
- 2017-08-30 19:58:20
- admin
Anhui sinograce Chemical Co., Ltd.participated in the 20th China International Adhesive and Sealant Exhibition in 2017 and get complete success. Sinograce Chemical as a well-known brand in water-based products industry, participated in this event. The exhibition focused on the display of water-based acrylic adhesive and special modified acrylic adhesive. In the three...
-
We to visit Shangchuan Island for two days
- 2017-10-09 14:42:56
- admin
Anhui SINOGRACE chemical on September 30, 2017, Company employees to visit Shangchuan Island for two days, Came to the beauty of the fishing port, We appreciate the sunset and sunrise, The first taste of wild pineapple, Swimming in the seaside, Looking for a lovely hermit crab on the shore, Follow the fisherman fishing, When the sun was setting, we eat dinner at the seaside. Thank t...
-
What is water-based wood paint resin
- 2017-12-11 10:41:06
- admin
Water-based wood paint resin is the main raw material for the production of water-based wood paint. It can be used as varnish, paint the bottom dual-use resin. It is widely used in water-based industrial wood coatings, water-based decoration coatings and other fields. Water-based wood paint resin is divided into water-based wood paint and oily wood paint. Oily paint consists of organic solvents. I...
-
Common problems with waterborne wood lacquer:Varnish coating film is not flat, uneven luster
- 2020-02-29 17:27:50
- admin
Common problem of lacquer of waterborne woodwork: varnish besmear film is not level off, burnish is not even Phenomenon : Wood is filled with putty hole processing, after sealing the bottom, coating brush varnish, coating film flatness is low, luster is not uniform. Cause : Hole putty poor quality, loose, solvent absorption. The wood fiber and pith ray on the wood surface are relatively loose. The...
-
Water-based paint knowledge base-Water-based wood paint runs off oil
- 2020-02-29 14:27:35
- admin
Water-based wood paint runs off oil---Ask a water paint expert Question: Waterborne wood lacquer should run oil to a rainy day only, or brush one day, also can run oil when waiting for the 2nd day to brush again, did especially ugly later . Water-based white paint does not have this problem. The problem ofwater-based varnish is obvious. Answer: Although it is a water-based paint, the film is hydro...
-
Oil pocket phenomenon in water-based paint
- 2020-02-29 11:18:05
- admin
Oil pocket phenomenon in water-based paint Problem: To make furniture with transparent colors, in order to save the craft and achieve the purpose of simple construction. We added water-based Color Concentrate to the topcoat for spraying, and the resulting topcoat contained some oil pockets or other unacceptable "face problems." Reply: Aqueous color concentrates are generally made of metal complexe...
-
We Anhui Sinograce Chemical Co., Ltd. will join the label expo europe 2019
- 2020-02-22 15:20:20
- admin
Labelexpo Europe 2019 at the period of 24-27 September, 2019 in BRUSSELS, Belgium At Labelexpo Europe 2019, view hundreds of live demonstrations of the latest innovations, examine the most advanced collection of label and package printing technologies and acquire what your business needs to succeed. Explore the world’s largest label and package printing trade show and advance ten steps ahead of th...
-
Water - based coating formulation design system
- 2020-02-22 13:34:27
- admin
Water - based coating formulation design system Waterborne coatings, including waterborne wood lacquers, are water-based dispersions and diluents. Unlike conventional solvent-based coatings, the formulation system is a more complex system.When formulating, not only the type of polymer, the properties of the emulsion and the dispersion are concerned. It is also necessary to rationally select variou...
-
Characteristics of wood matrix and its effect on coatings
- 2020-02-21 15:43:18
- admin
To master waterborne wood coatings and coatings, you must be familiar with the characteristics of wood. In this way, we can find the root cause of the problem in the painting process and make the necessary preventive and treatment measures. Wood is a natural fiber material, seen from the cross section of the trunk, it is a uniform material composed of layers of different materials, with many textu...
-
Cohesion and thermal expansion coefficient of paint film
- 2020-02-21 13:35:17
- admin
Cohesion and thermal expansion coefficient of paint film The force caused by the cohesion of molecules of the same substance is called cohesion.The more cohesive the coating, the worse the adhesion.In the drying process of paint, with the increase of solvent volatilization and crosslinking degree, the cohesion between film forming material molecules increases, the film produces shrinkage phenomeno...
-
Wettability of paint to substrate
- 2020-02-21 11:35:37
- admin
The adhesion of the paint film is caused by the mutual attraction between the paint and the polar groups on the surface of the coated substrate, and the mutual attraction between the polar groups is based on the premise that the paint is well wetted on the surface of the coated substrate.Since the wet condition of the coating on the surface of the coated substrate depends on the surface tension of...
-
2.Substrate treatment - one of the waterborne wood coating process series
- 2020-02-20 22:09:52
- admin
The third step in the treatment of water-based paint coated substrates is sealing. The role of the water-based putty is to make the surface of the substrate such as wood not very regular and smooth and minor defects and defects, such as pores, fine cracks, pits, joints and concrete, to reduce the surface roughness and increase the flatness.The requirements for water-based putty are good adhesion a...
-
Process variations of different paint types
- 2019-09-03 15:15:08
- admin
3.Process variations of different paint types-Waterborne wood paint application process 2 Applying a matt lacquer to the varnish can change the coating to a matte finish, while applying a varnish to a matt lacquer reduces the brightness of the film and does not achieve maximum brightness and transparency. The color paint of waterborne wood lacquer can be divided into two types: coloured coating an...
-
Water - based paint spraying - water - based wood paint coating process 3
- 2020-02-20 21:43:06
- admin
Spraying construction paint film than brush paint film more flat. Spray with water-based wood paint should be added on the basis of the original paint 5% ~ 30% of the tap water dilute after use, for the viscosity of the paint water should also increase, the diluted paint after its coating a 4 cup viscosity should be around 18 ~ 20s. Dilute mix well should be static at least 20 minutes, until the b...
-
How to choose the appropriate label glue
- 2022-07-09 11:05:26
- admin
1.Permanent and removable options In terms of the performance of adhesives, they can be divided into two categories: permanent adhesives and removable adhesives.(Permanent is generally used in electronic machinery, such as electronic label, typical: mobile phone battery label, removable is generally used in food, personal care, such as: wet wipes label, fruit label, clothing label, etc.) 2.The sur...