Categories
new blog
The main difference is that the nature is different, the production process is different, and the characteristics are different, as follows: First, the nature is different 1.Flexo printing Flexo printing is a direct printing method known as flexo printing because of the use of elastic, raised image plates. 2.Gravure printing Gravure refers to gravure printing, first the printing plate on the exces...
Color paste, also known as pigment paste, is an important form of dye application, which is widely used in textile, ink, paint and other industries. In the classification of pastes, low-halogen pastes and ordinary pastes are two common types. They have certain differences in composition, performance and use, and the differences between the two types of pastes will be discussed in detail below. Fir...
1.There are many formulations of coated glue, and different formulations need to be determined according to the specific use. It generally includes basic glue, thickener, curing agent, auxiliaries and other ingredients. 2.Basic glue is the most important component of laminating glue, it can be selected according to different use requirements of different types, such as water-based, oily, dilu...
The performance requirements of water-based varnish for printing paper glazing are as follows: 1.The film has good environmental resistance. Some of the printed matter after glazing is used to make all kinds of packaging cartons, in order to be able to play a good protective effect on the packaged products, the environmental resistance of the glazing film layer must be better. For example, the pac...
The transparency of composite film is very high, but in the composite processing of plastic film, the composite film often has problems such as insufficient transparency. So, what is the reason for affecting the transparency of the composite film? This article analyzes one by one for reference. Improper selection of adhesives: Such as the color of the adhesive itself is dark or the fluid...
Ink scraping is not clean troubled many manufacturers, there are ten reasons for scraping is not clean, save it for use! 1.Ink viscosity is too high When the viscosity of the ink increases, the surface tension also increases correspondingly, and the force between them also increases, so that the scraper will increase the impact force of the ink on the scraper in the contact process with the ink, d...
Different processing methods will cause different fault manifestations, the following we mainly analyze the causes of paper thermit sealing delamination phenomenon under the gravure and solvent-free composite processing methods. The YBB paper aluminum-plastic composite film standard does not specify the composite strength index of the paper aluminum layer in the paper aluminum-plastic composite fi...
Water-based ink is referred to as ink, and flexible water-based ink is also known as liquid ink, which is mainly made of water-soluble resins, organic pigments, solvents and related additives by composite grinding processing. Water-based ink is especially suitable for tobacco, wine, food, beverages, medicines, children's toys and other packaging and printing products with strict sanitary condition...
PET label primer Cost-effectively improve the printability of PET labels Excellent adhesion with PET label substrate Good affinity with all kinds of ink Good weather resistance, no yellowing Easy to use, safe and environmentally friendly PET label primer is a water-based coating designed to improve the printability of PET label paper with advanced material technology and formulation technology. Du...
The OPP,PET film substrate | is an environmentally friendly coating using advanced material technology, which can significantly enhance the adhesion of EVA on difficult PET substrates and improve the product quality of PE card film. Card film, also known as plastic film, is a plastic film product coated with adhesive and OPP and PET as the substrate, which is widely used in the storage and protect...
Paper ink absorption is not only related to the degree of porosity and capillary state of the paper, but also related to the surface properties of the paper fiber, the content of fillers, pigments, adhesives, ink composition and characteristics, printing methods, printing pressure and other factors. In actual printing, the absorption of ink by paper can be divided into two stages. The first stage ...
First: the treatment of the substrate First, the substrate (aluminum, stainless steel or other metal substrate) is baked at high temperature (360℃×30 minutes ~380℃×10 minutes) to carbonize the grease or degreaser cleaning for the first step of degreasing. Step 2: Roughening the surface Available corundum sand 80#~120#, pressure 0.4~0.6mpa, sandblasting, so that the surface roughness of the substra...
In the face of different needs of different industries, rollers also need to do the corresponding coating treatment, so as to improve or compensate the relevant performance of the roller. So what are the surface coating technologies for rollers? 01 Coating treatment The coating treatment of the drum includes zinc plating, chromium plating, nickel plating, etc. The different coating treatment can i...
In the use of pesticides, only a few cases are the direct use of the original drug, and most of the cases are mixed with other additives and solvents to improve its use value and reduce the cost of use. Surfactant is a kind of additives that can give greater play to the value of pesticides and reduce the cost of pesticides. It plays the role of emulsification, foaming/defoaming, dispersi...
Teflon coating is one of the commonly used protective coatings in metal thermal spraying processing technology services, with good non-stick, wear resistance, corrosion resistance, high temperature resistance and other characteristics, can be applied to carbon steel, stainless steel, aluminum, copper, magnesium and various alloys and other metal materials. It can also be applied to non-metall...
1.Ink The three primary color inks have different degrees of color bias, which will affect the color bias of the whole picture to different degrees. However, a small amount of color bias can be corrected from the ink preparation. When printing to grasp the gray balance of the ink used, the same amount of yellow, product, green do not produce neutral gray, they produce lighter, more turbidity with ...
sinograce chemical
Sinograce Chemical is professional technical enterprise providing solutions of surface materials and manufacturing of raw materials. Sinograce Chemical Company is composed of R&D center, Manufacture center, Quality control department, Market center and International trade department. We have been dedicating to research on excellent paint/coating, adhesive for over 15 years. And now still conti...
Room 1013, Building A5, Financial Port Center, Yangzijiang Road, Baohe District, Hefei City， Anhui province, China
+86 0551 63459511
Copyright © 2015-2025 Anhui Sinograce Chemical Co., Ltd..All Rights Reserved.powered by dyyseo.com
top
English
français
русский
español
العربية