Categories
new blog
Due to the hydrophobic properties of waterborne polyurethane resin, it is difficult to dissolve in water or disperse uniformly, and the high reactivity of isocyanate groups to water, the direct synthesis of waterborne polyurethane faces many challenges. Therefore, to achieve the preparation of waterborne polyurethane, the primary strategy is to cleverly integrate hydrophilic functional groups (suc...
①The residual ink is converted into gray black ink According to the principle of color science, the complementary color of the ink mixed together, its hue will become gray black (red + green, yellow + blue-purple). Therefore, we can use this principle to deploy the complementary ink into gray-black ink by deploying the special color ink, and add it to the black ink in a certain proportion to use i...
Paper aluminum-plastic composite film in the actual application of medical packaging powder, granule packaging products compared to the plastic aluminum-plastic packaging commonly used in the market now has the following advantages: (1)The mechanical strength of the paper is high, the rigidity is good, and the ability to maintain the bag after forming is strong, which improves the cleanliness of t...
Pigment is the main component of ink, is a fine powder-like solid colored substance, can show ball, flake and other irregular shape. Generally, the diameter of pigment particles is in the range of several hundred nanometers to tens of microns (10-7~10-5m). The pigment can be evenly dispersed in the medium, but it is insoluble in the medium and does not react with the medium. Pigment is a colored b...
1.Touch optimization: the pursuit of softness and fullness In view of the frequent skin-to-skin contact of fabrics, the primary goal of the design of waterborne polyurethane coatings is to achieve soft touch and full form. This requires us to carefully balance the ratio of hard and soft segments in the formulation adjustment, while carefully selecting the types of both to ensure that the coating r...
Most coatings are composed of a base material (one or more resin mixtures), pigments (including physical pigments and functional pigments), solvents and some small amounts of additives and other coating raw materials. In the production of coatings, after the selection of various coating raw materials necessary for coating components, the next is how to make reasonable use of the technical and econ...
Aluminum foil can also be printed with water-based ink. As a non-absorbent substrate, aluminum foil poses a major challenge to water-based ink printing. However, some aluminum foil products that require food-grade printing cannot be printed with oil-based inks, so water-based inks have become the best choice. However, due to the poor absorption of aluminum foil to water-based ink, many inexperienc...
In the process of UV flexographic printing, the viscosity of the ink is one of the key factors that affect the printing quality and effect. Choosing the right viscosity UV flexographic ink is crucial to ensure printing quality and efficiency. When adjusting viscosity, it is usually necessary to consider many factors such as printing equipment, printing materials, image details and the expected pri...
Before the textile coating, it is necessary to pretreat the textile surface to ensure the adhesion and quality of the coating. Common surface treatment methods are: cleaning, degreasing, polishing and so on. Cleaning can be done with hot water or solvents, degreasing can be done with alkaline or acid degreasing agents, and polishing is done by mechanical removal of surface hair. The choice of coat...
First, emulsion resin Emulsion resin refers to resin particles suspended in water, which is widely used. There are many different emulsion resins on the market, such as polyurethane, acrylic, etc. They have the characteristics of strong adhesion, fast drying, etc., suitable for various printing and coating fields. Second, solvent-based resin Solvent-based resins should pay attention to environment...
First. Application of paper coating Paper coating is mainly used in packaging printing, book printing, poster printing and other fields, which can improve the gloss of paper, waterproof, oil-proof, wear-resistant, anti-folding and other functions. The paper coating can not only improve the quality of the paper, but also enhance the durability, stability and aesthetics of the paper, and is also a s...
The main reason for water-based ink drying 1.Water-based ink: water-based carton ink, non-woven ink, paper towels, paper cups and paper bags and other packaging printing; 2.Water-based polishing oil series: water-based polishing oil, polishing oil, high gloss, wear-resistant, matte, waterproof, antifreeze and other environmental protection water-based products. Water-based ink drying is mainly cau...
First, resin reaction temperature standard The reaction temperature of resin is an important process parameter, which has great influence on the reaction rate, physical properties and chemical stability of resin. In general, the resin reaction temperature should be determined according to different resin types and catalyst types. The following are some commonly used resin reaction temperature stan...
Flexo is a flexible, high resolution, warped letterpress plate. In recent years, flexo printing has developed rapidly in the field of printing, and its development prospects are generally optimistic. Flexographic printing presses transfer the right amount of ink to the substrate through a unique mesh roller. The appropriate use of ink is directly related to the printing production operation and pr...
Architectural coatings mainly use water as a dispersing medium and diluent, and its advantages are that the water of the dispersing medium is non-toxic and harmless, manufacturing and storage and transportation without the danger of explosion, no pollution to the environment, and to solve the problem of excessive VOC(volatile organic compounds) of solvent-based coatings at normal temperature. Film...
I.Definition The emulsion is a colloidal system with a particle size of 0.1~10μm formed by two insoluble liquids through the action of emulsifier. Secondary dispersion refers to a colloidal system formed by particles (or molecular groups) less than 1μm are dispersed into a continuous phase (such as water) under the action of a stabilizer. By definition, the formation of emulsions and secondary dis...
sinograce chemical
Sinograce Chemical is professional technical enterprise providing solutions of surface materials and manufacturing of raw materials. Sinograce Chemical Company is composed of R&D center, Manufacture center, Quality control department, Market center and International trade department. We have been dedicating to research on excellent paint/coating, adhesive for over 15 years. And now still conti...
Room 1013, Building A5, Financial Port Center, Yangzijiang Road, Baohe District, Hefei City， Anhui province, China
+86 0551 63459511
Copyright © 2015-2025 Anhui Sinograce Chemical Co., Ltd..All Rights Reserved.powered by dyyseo.com
top
English
français
русский
español
العربية