Categories
Lovers who like to collect books know that books are exposed to the air and vulnerable to damage because they are placed in the bookcase for a long time, and the edge of the book is produced in this environment. Book edge hot printing technology can not only effectively protect books, but also play a beautification, decorative books, the original purpose of brush gold is to avoid dust falling into...
With the progress of science and technology, the printing technology industry is also developing rapidly, and more and more adhesives are used in the packaging and printing industry, and more and more varieties are also available. The film coating process is widely used in a variety of packaging, small to medicine boxes, crafts boxes, large to outer boxes and various product packaging. Some coatin...
There are many factors affecting the quality of the film, in addition to paper, ink layer, film, adhesive and so on In addition to the objective factors, it is also affected by subjective factors such as temperature, pressure, speed, and glue amount. If these factors are not handled well, various laminating quality problems will occur. There are snowflakes on the product 1.The amount of glue is to...
Water-based adhesives for printing are very common, which mainly include water-based pasting adhesive, laminating adhesive, water-based sealing adhesive and so on. Water-based laminating adhesive Water-based film adhesive has been widely used in recent years for its high brightness, low cost, easy operation and water-based environmental protection. Water-based film adhesive is mainly divided into ...
Acrylic paint is a fast drying paint made from pigments suspended in acrylic polymer emulsions and plasticizers, silicone oils, defoamizers, stabilizers, metal soaps. Acrylic paint is water-soluble, but becomes resistant to water when dried.Depending on the amount of paint diluted with water, or modified with acrylic gels, media, or pastes, the final acrylic paint can resemble watercolor, gouache,...
In the production process of water-based polyurethane to add a certain type of additives, it is necessary to pay attention to its role in the various stages of storage, construction, application, and consider and evaluate its role and impact in the next section. For example, when the water-based polyurethane paint is operated with wetting and dispersing agents, it plays a certain role in storage a...
The main difference is that the nature is different, the production process is different, and the characteristics are different, as follows: First, the nature is different 1.Flexo printing Flexo printing is a direct printing method known as flexo printing because of the use of elastic, raised image plates. 2.Gravure printing Gravure refers to gravure printing, first the printing plate on the exces...
First, material selection and preparation To make the resin crack effect, you first need to prepare the resin and pigment. Resin selection of high transparency, high hardness, wear resistance products, pigments can choose mineral pigments or metal pigments, you can also add a small amount of color pigments to prepare a rich color. Second, color mixing Mix the paint into the resin one by one and st...
Copyright © 2015-2024 Anhui Sinograce Chemical Co., Ltd..All Rights Reserved.powered by dyyseo.com
top