Categories
new blog
September 1, 2018,Anhui sinograce Chemical Co., Ltd held an event launching ceremony of “The third Orange War”.
The exterior wall stone paint of the building is really natural, after the paint is dry,it is like a real stone, and the colors are warm and natural, and the color is fresh and nice. Perhaps a lot of friends, for this anti-stone coating is not very understanding, so,will inevitably feel very strange, then this material really have these advantages? In fact, this anti-stone coating not only has the...
Analysis on the application of waterborne polyurethane (WPU) in coatings Waterborne polyurethane is used in water based wood coatings, which is expected to obtain excellent film hardness, heat resistance and dielectric properties, and good film-forming properties. The higher the degree of microphase separation of aqueous polyurethane,the greater the difference of softening temperature, the better ...
Colorful paint is mainly used in imitation stone effect, so also known as liquid stone and the horizon exterior paint.is composed of incompatible two-phase components, one of the dispersion medium for the continuous phase, the other phase for the dispersed phase. Painting, through a one-time spray, you can get luxury, beautiful, colorful patterns. The pattern formed by the one-time spraying is com...
1.Energy conservation: Water in water multicolor coating, pure water-based formula, excellent raw material technology.Granite stone, depending on nature, the development of powerful resources have some damage to the ecological. Water covered with colorful paint to solve this problem, and decorative curtain wall color can be artificially controlled, energy saving and environmental protection,commen...
Water-in-water multi-color paint spray guns to use most of the spray, for the operation, but also because of the improper use of the gun caused by uneven distribution of the coating,the following together to see how to solve it. The smaller the gun distance, the greater the pressure of the spray, the greater the impact of the product by the pressure of the water, water-in-watercolorful paint coati...
Phenomenon : Part of the water-based paint film from the primer uplift, which contains gas or liquid, showed uneven distribution. Cause 1.When the water-based paint is applied, the dry water-based paint film is exposed to rain. 2.Apply a water-based paint primer to the wet substrate. 3.Water - based paint film is affected by acid - base and heat. Amelioration 1.Considering the gas phase conditions...
Water - based wood paint common problems: gloss wood paint uneven luster Phenomenon There is light coating on the wood surface, coating film gloss, some areas of low gloss. Cause The wood fiber and pith ray in cork are loose with the growth of growth rings, the base material infiltrates excessively, the coating film increases the pigment volume concentration due to the decrease of the base ma...
SINOGRACE Chemical has more than 8 years history in exporting chemicals to India. Due to the stable quality and considerate service, the chemicals supplied by SINOGRACE receive good comments locally. Now SINOGRACE is a famous and popular chemical brand in India.
Wood bumps - Common problems with water paint Wood grain is exposed when broken or damaged wood comes into contact with water.A good example of this is when a curved toothpick is placed in water, it will draw water through the capillaries, elongate, and straighten.When the fibers on the board are exposed, they suck water into the wood like a straw, causing the fibers to swell and stick to the surf...
Problem:Some of the materials used in the construction of wood products are plywood and wood chip fiberboard. One of the rubber is the most afraid of water, water paint spray will dissolve the inside of the glue. The effect that USES close lacquer also is not ideal, how should solve? Is it easy to use sinograce chemical raw material solution? thank you . Response:This type of wood is usually ...
Question: Dear expert, I am now eager to develop a new water-based paint mainly for wood. The problem that needs to be solved urgently is the drying time of water-based paint. I want his dry time to be in 30 seconds, can you achieve excuse me, excuse me be colophony its key effect. Response: Hello, the dry time of water - based paint has two concepts commonly."Surface dryness" refers to the basic ...
Question: how to make water-borne heat-resistant paint and water-borne silver powder paint? Whose resin is better? Can you provide the reference formula? Response: Hello, Mr.Zheng,We have received many similar requests for reference formulations.Industrial coatings are characterized by their complexity.It is water borne anti-rust paint likewise,because use environment and the different that ask, f...
Water-based paint sticky sticky brush - Ask a water paint expert Problem:Water-based paint, when brushing, paint is easy to stick to the brush, so that the color is not loose. What is this, please? Answer:the reasons why water-based paint is sticky and sticky are as follows 1.High viscosity of water-based paint: if the viscosity of water-based paint is high, the paint will stick to the brush as yo...
Filming aids in waterborne coatings Problem : Why do you need to add filming aids to one-component waterborne coatings? The emulsion alone does not form a film. Filming aids are added to form a film. Why does the film-forming auxiliary volatilize, which is still a complete film, and is different from a film without a filming aid? Why can't a single emulsion be fused by water to produce a capillary...
Factors Affecting Shrinkage of Waterborne Coating Films In practice, the main causes of shrinkage are as follows: 1. The substrate is contaminated by oil or impurities 2. Apply a paint to the old paint or finish without sanding 3. The interval between constructions of the two paints is too long 4. Too much defoamer in the paint The following focuses on two factors: defoamer and impurity contaminat...
Copyright © 2015-2025 Anhui Sinograce Chemical Co., Ltd..All Rights Reserved.powered by dyyseo.com
top