Categories
new blog
One,Overview Paper-plastic composite can make the surface of paper printed matter more bright, smooth and color more bright and full of three-dimensional sense, but also play a role in moisture, anti-fouling, anti-counterfeiting, folding resistance, wear resistance and so on.It has been widely used and rapidly developed in printing and packaging industry at home and abroad. The market demand for p...
1.Familiar with the properties of adhesives For bonding, adhesive is the basis, the selection of adhesive, its performance is an important basis. Different types of adhesives, with different properties, determine their various uses, only familiar with the performance of adhesives, in order to handy selection. 2.Identify the nature of the adhesive There are many types of adhesive species with diffe...
The adhesive not only needs it to stick firmly, but also needs long-term viscosity, the effect of the adhesive is better, if it can not be sustained, after a period of time it will fall off, or for some reason, the viscosity will decline, so we sometimes need to think of some ways to ensure the durability of the viscosity. Research work and experience have shown that adhesives can bond things by i...
With the rapid development of printing and packaging industry, the appearance design of products is becoming more and more high-end. The composite technology used in modern exquisite printing mainly includes: paper printing and plastic film composite and plastic printing and plastic film composite, that is, paper-plastic composite and plastic-plastic composite.As a new type of packaging material, ...
Composite film manufacturer there are bubbles and spots in the composite film, what is the cause? There are many factors in this kind of situation, and the actual situation needs to be analyzed in detail. The basic elements commonly used to produce bubbles and spots are: 1, environmental factors such as dust and suspended matter interference, which requires a good environmental health area environ...
In daily life, we will use glue in many places, and we often see the figure of water-based glue. If you say you can't remember where you used glue, look at street posters, advertisements, and alley shoe repairmen.We usually use glue in class or work to stick some paper, bills and so on. It can be said that water-based glue has always been around us. In addition, water-based adhesives have also bee...
There are many factors affecting the quality of the film, in addition to paper, ink layer, film, adhesive and so on In addition to the objective factors, it is also affected by subjective factors such as temperature, pressure, speed, and glue amount. If these factors are not handled well, various laminating quality problems will occur. There are snowflakes on the product 1.The amount of glue is to...
According to the different raw materials and equipment, the coating process can be divided into two kinds of coating process and pre-coating process. That is to say, the film used in the coating process is now coated, and the adhesive used is generally solvent-based and emulsion type, prepared according to need. However, the film used in the pre-coating process is pre-coated, and the adhesive used...
Lovers who like to collect books know that books are exposed to the air and vulnerable to damage because they are placed in the bookcase for a long time, and the edge of the book is produced in this environment. Book edge hot printing technology can not only effectively protect books, but also play a beautification, decorative books, the original purpose of brush gold is to avoid dust falling into...
With the progress of science and technology, the printing technology industry is also developing rapidly, and more and more adhesives are used in the packaging and printing industry, and more and more varieties are also available. The film coating process is widely used in a variety of packaging, small to medicine boxes, crafts boxes, large to outer boxes and various product packaging. Some coatin...
In the actual operation of our manufacturer, whether the laminating products can normally complete the factory and meet the requirements of customers, in addition to the quality of the laminating glue itself, it is also related to the supporting factors such as paper, film, equipment accuracy, environment, and operating experience in the composite process. Often in some small details, it will caus...
Common problem Cause Solution The middle part of the compound bubbles Add dry oil when brushing Dry and then recombine The amount of glue is too small Increase glue Film or print surface contamination or excessive dusting Dedusting The overflow on the surface of the rubber roller is not removed, causing the mucous membrane to empty Cleaning glue roller The pressure is too small, and the ...
In the post-press process of the printing and packaging industry, the film improves the brightness of the printed matter and enhances the water resistance. It provides a beautiful visual effect for people's life. With the continuous emergence of various processes, equipment and glues, there have been some new trends in post-press coating. First, the proportion of water-based coating is increasing,...
Coated adhesive is generally used in the field of printing, processing the surface of the printed matter, so as to improve the gloss of the printed matter, and play a certain protective effect on the printed matter, coated adhesive refers to the BOPP film on the paper of a kind of glue. Divided into oil-based laminating glue and water-based laminating glue, water-based laminating glue is widely us...
1. The effect of membrane material There are dust adsorption, particle impurities, poor plasticization and other crystal points in the film. The moisture absorption on the film surface of the material and the precipitation of additives in the material will cause composite bubbles. The thickness of the film should be as uniform as possible, if the distribution is uneven, it is easy to cause the imb...
There are many factors affecting the quality of the film, in addition to paper, ink layer, film, adhesive and so on In addition to the objective factors, it is also affected by subjective factors such as temperature, pressure, speed, and glue amount. If these factors are not handled well, various laminating quality problems will occur. There are snowflakes on the product 1.The amount of glue is to...
sinograce chemical
Sinograce Chemical is professional technical enterprise providing solutions of surface materials and manufacturing of raw materials. Sinograce Chemical Company is composed of R&D center, Manufacture center, Quality control department, Market center and International trade department. We have been dedicating to research on excellent paint/coating, adhesive for over 15 years. And now still conti...
Room 1013, Building A5, Financial Port Center, Yangzijiang Road, Baohe District, Hefei City， Anhui province, China
+86 0551 63459511
Copyright © 2015-2025 Anhui Sinograce Chemical Co., Ltd..All Rights Reserved.powered by dyyseo.com
top
English
français
русский
español
العربية