Categories
new blog
Composition of pressure sensitive tape 1.Pressure sensitive adhesive, 2.substrate 3.Primer 4.Back treatment agent 5.Isolation paper The main components of the pressure sensitive adhesive and resin, including rubber such as polyacrylic acid ester or polyvinyl ether, homogeneous base material requirements, small scale and good to solvent invasive, including, (1) fabric such as cotton, glass cloth or...
Non-stick pot is cooking will not stick to the bottom of the pot, because the bottom of the pot uses a non-stick coating, the common non-stick can best have teflon coating and ceramic coating. The non-stick pan overcomes all the shortcomings of the traditional pot, easy to clean, a light wipe is clean, non-stick pan can easily fry food without sticking to the bottom, can minimize the oil, the kitc...
First, pour the glue on the flat glass to observe its rheology, and wiggle it to observe its rheology,If the flow of glue is too fast, it means that the glue is too thin and poor, and too thick is not conducive to bonding. Secondly, with a hand dip to observe its viscosity if you can slowly draw, a little sticky hand is better. Then, pour it on a small piece of glass to observe its film forming ti...
The bonding effect can be achieved by applying pressure for a short time (non-aqueous solvent heating) It overcomes the solvent volatilization and drying time needed during the operation of structural adhesive, and can improve the working environment After stripping, it can be corrected without contamination and can be reused for many times Easy to operate, can greatly improve the production effic...
Waterborne Acrylic Resin Product Description: The water-based acrylic resin is made of acrylic acid and acrylate monomer through solution polymerization. Product purpose: This product can be used for water-based aluminum foil gloss and ink, water-based gravure printing paper gloss and ink, water-based carton ink manufacturing Product features:alcohol water as the main solvent, has no smell, no tox...
Water-based ink is composed of resin (water-soluble resin colloidal dispersion emulsion polymer) aqueous amine (mainly ammonia) pigment (organic pigment inorganic pigment) and additives.The so-called water-based ink is mainly water as a solvent by scientific processing, compared with other printing ink, water-based ink, because it does not contain volatile toxic organic solvents, so in the printin...
Water-based flexible printing ink is made of water-soluble pigment and water-based additives by a series of process grinding.Flexo water-based ink is suitable for printing various plastic woven bags, plastic handbags, non-woven bags, paper labels, kraft paper bags, corrugated paper, etc.It is non-toxic and odor free, it is not only environmental protection and safety but also can save 30% of the p...
Water-based adhesive is a one-component pressure sensitive adhesive of self-crosslinking acrylic ester at room temperature. It has adhesion to wood, PVC, metal, glass board and so on. It is suitable for wood skin, OPP tape, double-sided tape, aluminum foil tape and self-adhesive trademark paper. performance index Composition: acrylic polymer Solid composition: 55% 2 Viscosity: 6000 CPS/25 Crosslin...
Pigment is a white or colored fine powder substance which is generally insoluble in water, oil and solvents (some pigments are soluble), but can be evenly dispersed in water.Pigment and film forming material solution mixed on the surface of the material, can form a covering ability of various colors of the paint layer in wood products coating or finishing process, pigment has three functions. It i...
Printing pressure has a great influence on printing quality.Maintaining an average and constant printing pressure in the effective printing area can not only make the printing ink uniform, small color difference, but also keep the size of the printing mark.It is feasible to achieve maximum flat flat printing printing pressure But because it is the manufacturing precision of printing plate flatness...
The difference between water-based gravure printing ink and other printing methods mainly lies in: its printing plate through corrosion or engraving, the formation of a lot of plate surface of different volumes of concave hole, known as the ink hole.The ink hole volume is large, the amount of ink filling in the printing process is large, and the ink layer thickness is transferred to the substrate....
Automobile seal strip is one of the important parts of the automobile, widely used in doors, Windows, body, seats, sunroof, engine case and trunk and other parts, with waterproof, sealing, sound insulation, dust, antifreeze, shock absorption, heat preservation and energy saving important role.The rubber flocking seal occupies a very important position in the automobile seal system. The rubber floc...
Product character Appearance：Milky white or dark blue gelatinous liquid Solid content : ≥41% PH: 7.0 to 8.0 Viscosity: 1200 ~ 1800 (MPA.s) Performance characteristic 1.Strippable protective coating is made of waterborne polyurethane, weather resistance 24 months, ice resistance, acid and alkali resistance. 2.Water based formula, odorless and tasteless, free of heavy metals and ...
The peeling protective coating is a liquid protective coating made of waterborne polyurethane, which can be sprayed on the surface of automobiles, furniture, electrical appliances and other objects as a protective coating.It has good formativity, can in complex shape surface to form a layer of continuous, uniform stick, strength, transparent protective coating, no need baking, room tempe...
The use of flocking glue is different from that of ordinary glue. General flocking process can be divided into three kinds: 1. Flocking box, according to the need of flocking products make it the size of the corresponding flocking box, then placed in the flocking box of villi, connected to the power supply, make the flocking box to form a strong magnetic field, when the product from the side wear ...
Coupling agent is a kind of material with two different properties of functional groups, the biggest characteristic of its molecular structure is that the molecule contains two groups with different chemical properties, one is an inorganic group, easy to react with the inorganic surface; The other is an organophile group, which can react with synthetic resins or other polymers or form hydroge...
sinograce chemical
Sinograce Chemical is professional technical enterprise providing solutions of surface materials and manufacturing of raw materials. Sinograce Chemical Company is composed of R&D center, Manufacture center, Quality control department, Market center and International trade department. We have been dedicating to research on excellent paint/coating, adhesive for over 15 years. And now still conti...
Room 1013, Building A5, Financial Port Center, Yangzijiang Road, Baohe District, Hefei City， Anhui province, China
+86 0551 63459511
Copyright © 2015-2025 Anhui Sinograce Chemical Co., Ltd..All Rights Reserved.powered by dyyseo.com
top
English
français
русский
español
العربية