• 2026-07-10 13:22:24
• admin

Resin is the main film-forming component in printing ink. It influences pigment dispersion, adhesion, drying speed, gloss, flexibility and resistance. There is no universal resin for every ink. The right choice depends on the ink system, substrate, printing method and the conditions the printed product will face after printing. Quick Resin Selection Guide Ink typeCommon resin choicesMain advantage...

• printing ink resin
• resin for printing ink
• printing ink binder

• 2026-07-16 15:53:46
• admin

Waterborne polyurethane dispersions, commonly known as PUDs, may appear milky white, translucent, or slightly bluish in the liquid state. This difference is mainly related to particle size, particle size distribution, and how strongly the dispersed particles scatter visible light. In general, milky dispersions scatter more light, while finer dispersions allow more light to pass through. However, a...

• PUD
• polyurethane dispersions
• waterborne polyurethane

• 2026-07-29 17:36:58
• admin

When UV ink comes off during a tape test, the primer is often blamed first. However, poor adhesion can also result from the film surface, contamination, incomplete primer drying or incorrect UV curing. Here, “adhesion promoter” refers to a primer applied before printing. No single grade is suitable for every plastic film. Choose the Primer by Substrate PET and BOPET films often benefit from a prim...

• BOPP printing primer
• UV ink adhesion promoter
• water-based UV ink primer