Categories
new blog
According to the different raw materials and equipment, the coating process can be divided into two kinds of coating process and pre-coating process. That is to say, the film used in the coating process is now coated, and the adhesive used is generally solvent-based and emulsion type, prepared according to need. However, the film used in the pre-coating process is pre-coated, and the adhesive used...
Aluminized film glue is a composite material that binds aluminum film and other materials together by glue. It is usually used in paper packaging to prevent moisture, oxidation, heat insulation and pollution. First of all, the aluminized film glue can effectively prevent the paper from absorbing moisture and oxygen in the air, thereby maintaining the dryness and freshness of the product and extend...
As a kind of widely used adhesive, coated adhesive has a variety of processes. Here are some of the common processes used: 1. Hot melt coating: hot melt coating is to place a layer of film on the surface of the print, and then through hot pressing the film and the print together.In this process, the laminating glue is heated to turn it into a liquid, which then forms a uniform coating between the ...
1. The effect of membrane material There are dust adsorption, particle impurities, poor plasticization and other crystal points in the film. The moisture absorption on the film surface of the material and the precipitation of additives in the material will cause composite bubbles. The thickness of the film should be as uniform as possible, if the distribution is uneven, it is easy to cause the imb...
There are many factors affecting the quality of the film, in addition to paper, ink layer, film, adhesive and so on In addition to the objective factors, it is also affected by subjective factors such as temperature, pressure, speed, and glue amount. If these factors are not handled well, various laminating quality problems will occur. There are snowflakes on the product 1.The amount of glue is to...
There are many factors affecting the quality of the film, in addition to paper, ink layer, film, adhesive and so on In addition to the objective factors, it is also affected by subjective factors such as temperature, pressure, speed, and glue amount. If these factors are not handled well, various laminating quality problems will occur. There are snowflakes on the product 1.The amount of glue is to...
Coated adhesive is generally used in the field of printing, processing the surface of the printed matter, so as to improve the gloss of the printed matter, and play a certain protective effect on the printed matter, coated adhesive refers to the BOPP film on the paper of a kind of glue. Divided into oil-based laminating glue and water-based laminating glue, water-based laminating glue is widely us...
Water-based adhesives for printing are very common, which mainly include water-based pasting adhesive, laminating adhesive, water-based sealing adhesive and so on. Water-based laminating adhesive Water-based film adhesive has been widely used in recent years for its high brightness, low cost, easy operation and water-based environmental protection. Water-based film adhesive is mainly divided into ...
Brand :Sinograce Type: Water base adhesive Appearance：Milky white emulsion with blue light Performance and use:This product is suitable for the coating of BOPP film, PET film and printed color paper (dry coating process). High bonding q degree, large tension compound drying speed, good parallel flow; For gold and silver cardboard, single powder paper bonding q degree, tension q, to avoid the...
First, the choice of self-adhesive printing raw materials When selecting raw materials, we must choose high-quality self-adhesive materials with qualified physical and chemical indexes, rather than products with expired or unstable physical and chemical indexes. Although the latter price is low, but due to the unstable quality of such materials, large consumption in each process, and even lead to ...
Acrylic paint is a fast drying paint made from pigments suspended in acrylic polymer emulsions and plasticizers, silicone oils, defoamizers, stabilizers, metal soaps. Acrylic paint is water-soluble, but becomes resistant to water when dried.Depending on the amount of paint diluted with water, or modified with acrylic gels, media, or pastes, the final acrylic paint can resemble watercolor, gouache,...
An important link in the production of color printing packaging is after color printing or paper-plastic film decoration, now the means of packaging products mainly rely on film or glazing, advertising instructions, books and notebook covers, commodity packaging and signs are all so. In terms of surface coating or glazing, there are now a variety of decorative methods to choose from, such as: (1)C...
Water-based coating adhesive is a product based on water-based environmental protection emulsion system, which is mainly used in the field of packaging and printing, and can firmly bond film materials to paper and other surfaces. Characteristics of water-based coating adhesive Fast dry ：Under the appropriate temperature and pressure conditions, the water-based coating adhesive will dry quickly and...
Sinograce Chemical is professional technical enterprise providing solutions of surface materials and manufacturing of raw materials and water based adhesive. On February 5, 2024, Sinograce Chemical held a year-end work summary meeting and a New Year party. Sinograce Chemical wishes all customers a happy New Year and a better and better New Year.
The difference between water-based paint and paint: Compared with paint, water-based paint, its wear resistance, and aging resistance have been significantly improved, compared with traditional paint, water-based paint is more affordable, more easily used by people, and less harmful. Water-based paint, water as diluent, with wear-resistant, aging resistance, easy to use and other characteristics, ...
Laminating glue is currently a kind of strong glue widely used in the market, so what is the application processing process of laminating glue? The application processing technology of laminating glue is as follows: 1, the composite method is dry composite, that is, the coating machine should use a dry composite machine with curing furnace and composite roller heating. 2, curing furnace ambient te...
sinograce chemical
Sinograce Chemical is professional technical enterprise providing solutions of surface materials and manufacturing of raw materials. Sinograce Chemical Company is composed of R&D center, Manufacture center, Quality control department, Market center and International trade department. We have been dedicating to research on excellent paint/coating, adhesive for over 15 years. And now still conti...
Room 1013, Building A5, Financial Port Center, Yangzijiang Road, Baohe District, Hefei City， Anhui province, China
+86 0551 63459511
Copyright © 2015-2025 Anhui Sinograce Chemical Co., Ltd..All Rights Reserved.powered by dyyseo.com
top
English
français
русский
español
العربية