Categories
new blog
Ink in the transfer, distribution (from the ink hopper ink, after complex transfer and distribution, until the smooth transfer to the surface of the printing sheet to form a blot), the flow phenomenon is called the transfer of ink, it is the main body of ink operation adaptability. The transfer of ink can be understood from two aspects: On the one hand, ink transfer, uniform ink and ink roller tra...
After the ink is transferred to the printing surface by the blanket at a certain printing speed and under a certain printing pressure, the fixation and drying speed of the ink film, as well as the color, gloss, fastness and resistance after film formation, etc. ensure the printing effect, which are collectively referred to as the printing quality suitability of the ink. It mainly includes color, p...
Water-based single-component protective film adhesive is an environmentally friendly adhesive prepared by using natural polymer or synthetic polymer as adhesive and water as solvent or dispersant instead of toxic organic solvents that pollute the environment.Existing water-based adhesives are not 100% solvent-free and may contain limited volatile organic compounds as additives to their water-based...
Water-based glue, when the autumn and winter season, special attention should be paid to anti-freezing treatment, according to different temperatures, the implementation of different solutions. Cautions (1) Pay attention to warmth and anti-freezing when transporting glue: when transporting below 0℃, pay attention to the warmth of the vehicle, and transport below -5℃ is prohibited; (2) Ke...
Hot melt adhesive (English name: HotGlue) is a kind of plastic adhesive, in a certain temperature range, its physical state changes with the change of temperature, but the chemical properties remain the same, its non-toxic and tasteless, belongs to environmental protection chemical products.Because the product itself is solid, easy to package, transport, storage, no solvent, no pollution, non-toxi...
The relationship between the index of laminating glue and common problems I. Viscosity Viscosity is the internal friction of the liquid, and colloquially, the thin consistency of the glue. The viscosity of the glue does not indicate the bonding performance of the glue, in other words, the thicker the glue is, the better the performance is. The viscosity can be adjusted within a cert...
Bond strength and deinking Bond strength is one of the most important indexes of glue properties. Bond strength refers to the amount of force required when the film and paper are stripped, and this index is often combined with the deinking effect. We first need to understand the principle and structure of paper-plastic composite. If you want to enhance the bonding force, you must consider the...
During December 10, 2022, customers from Russia have come to visit our company. Foreign trade manager and relevant personnel warmly welcome our customers, and introduced our product which they are interested in detailedly. Water based glue
Existing water-based adhesives are not 100% solvent-free and may contain limited volatile organic compounds as additives to their water-based media in order to control viscosity or fluidity.The advantages are mainly non-toxic, no pollution, no combustion, safe use, easy to achieve clean production technology, etc., disadvantages include slow drying speed, poor water resistance, poor fros...
Because the water glue is bonded together by the film forming principle, its compound effect is very stable, and the product can be cut immediately.If the composite quality is bad because of the process or substrate, it can also be seen in the first time off the machine, and it will not be found after mass production.Therefore, the composite packaging products use water-based glue instead of solve...
water-base adhesive With the development of society, the quality of glue has been pushed to a high point, which also led to the development of water-based glue. At present, the environmental protection industry is in a stage of rapid development. People pay more and more attention to health and environmental protection issues. The chemical glue industry is also in a stage of rapid change, and wate...
Sinograce Chemical Industry started work! Welcome to consult and buy Chemical products. Sinograce Chemical is professional technical enterprise providing solutions of surface materials and manufacturing of raw materials. Sinograce Chemical Company is composed of R&D center, Manufacture center, Quality control department, Market center and International trade department. We have been dedicating...
Water-based adhesive with high polymer, water-soluble resin as the main raw materials, water as the solvent, less odor, environmental protection. With the continuous improvement of people's environmental awareness, water-based adhesives have become the mainstream of the market in recent years. Characteristics of water-based adhesive 1.Applicable to the substrate any kind of adhesive is not om...
Polyurethane (PU) is a kind of organic polymeric compounds containing repeated carbamate group (NHCOO) in the main chain.Polyurethane polymer materials have the advantages of wear resistance, high temperature resistance, good adhesion, easy processing, low price, but some polyurethane water resistance, heat resistance is poor, need to be modified by specific methods, in order to achieve the purpos...
Water-based coating is an effective means to process the surface of printed matter, to improve the gloss and strength of the surface of printed matter, enhance the aesthetic effect, temperature resistance, water resistance, wear resistance, improve the grade of printed matter and commodity value. Therefore, to measure the quality of the coating, it is also necessary to examine the brightness, stre...
Together to understand the characteristics of water-based acrylic emulsion! 1.Excellent adhesion The polymer structure of water-based acrylic emulsion contributes to the flow and wettability of molecular chains on the substrate surface, making the coating and substrate molecules in close contact, to achieve high adhesion 2.High load-bearing capacity of the makeup filler can significantly reduce th...
sinograce chemical
Sinograce Chemical is professional technical enterprise providing solutions of surface materials and manufacturing of raw materials. Sinograce Chemical Company is composed of R&D center, Manufacture center, Quality control department, Market center and International trade department. We have been dedicating to research on excellent paint/coating, adhesive for over 15 years. And now still conti...
Room 1013, Building A5, Financial Port Center, Yangzijiang Road, Baohe District, Hefei City， Anhui province, China
+86 0551 63459511
Copyright © 2015-2025 Anhui Sinograce Chemical Co., Ltd..All Rights Reserved.powered by dyyseo.com
top
English
français
русский
español
العربية