Categories
new blog
The final state of waterborne polyurethane is a solid film. During the process from emulsion to solid film, accompanied by the evaporation of water and the concentration of water dispersion, the latex particles are close to each other. Before the solid content reaches 74%, the dispersion particles can move in the continuous phase of water. Under the influence of water/air interfacial tension, the ...
Due to the hydrophobic properties of waterborne polyurethane resin, it is difficult to dissolve in water or disperse uniformly, and the high reactivity of isocyanate groups to water, the direct synthesis of waterborne polyurethane faces many challenges. Therefore, to achieve the preparation of waterborne polyurethane, the primary strategy is to cleverly integrate hydrophilic functional groups (suc...
Water based polyurethane emulsion has soft properties, so that it has good adhesion when attached to the surface of the object; At the same time, it can maintain a certain strength and does not crack. It is especially suitable for articles in high temperature, humid and chemically corrosive environment. This substance also has superior wear resistance and film smoothness, so it can form a uniform ...
Waterborne Polyurethane (WPU) is a polyurethane system using water as a solvent or dispersion medium. In recent years, with the increasingly strict environmental regulations and the improvement of people's environmental awareness, waterborne polyurethane, as an environmentally friendly material, has received extensive attention and research. First, the characteristics of waterborne polyuretha...
Paper aluminum-plastic composite film in the actual application of medical packaging powder, granule packaging products compared to the plastic aluminum-plastic packaging commonly used in the market now has the following advantages: (1)The mechanical strength of the paper is high, the rigidity is good, and the ability to maintain the bag after forming is strong, which improves the cleanliness of t...
Aluminum foil can also be printed with water-based ink. As a non-absorbent substrate, aluminum foil poses a major challenge to water-based ink printing. However, some aluminum foil products that require food-grade printing cannot be printed with oil-based inks, so water-based inks have become the best choice. However, due to the poor absorption of aluminum foil to water-based ink, many inexperienc...
There are several main reasons for water-based emulsion breaking: 1.Large temperature changes, water-based emulsion is easy to separate into water phase and oil phase at high temperature, and easy to crystallize at low temperature. 2.The selection of emulsifier is improper, and the type and dosage of emulsifier are different, which has a great impact on the stability of emulsification. The choice ...
Before the textile coating, it is necessary to pretreat the textile surface to ensure the adhesion and quality of the coating. Common surface treatment methods are: cleaning, degreasing, polishing and so on. Cleaning can be done with hot water or solvents, degreasing can be done with alkaline or acid degreasing agents, and polishing is done by mechanical removal of surface hair. The choice of coat...
First, what is the adhesion of resin Resin adhesion refers to the ability of the resin coating to adhere to the substrate. Insufficient adhesion of the resin on the surface can cause it to fall off or foam, and affect the service life and performance of the product. Second, how to effectively improve the adhesion of resin 1. Surface treatment Surface treatment is an effective method to improv...
The main reason for water-based ink drying 1.Water-based ink: water-based carton ink, non-woven ink, paper towels, paper cups and paper bags and other packaging printing; 2.Water-based polishing oil series: water-based polishing oil, polishing oil, high gloss, wear-resistant, matte, waterproof, antifreeze and other environmental protection water-based products. Water-based ink drying is mainly cau...
First, resin reaction temperature standard The reaction temperature of resin is an important process parameter, which has great influence on the reaction rate, physical properties and chemical stability of resin. In general, the resin reaction temperature should be determined according to different resin types and catalyst types. The following are some commonly used resin reaction temperature stan...
Flexo is a flexible, high resolution, warped letterpress plate. In recent years, flexo printing has developed rapidly in the field of printing, and its development prospects are generally optimistic. Flexographic printing presses transfer the right amount of ink to the substrate through a unique mesh roller. The appropriate use of ink is directly related to the printing production operation and pr...
Architectural coatings mainly use water as a dispersing medium and diluent, and its advantages are that the water of the dispersing medium is non-toxic and harmless, manufacturing and storage and transportation without the danger of explosion, no pollution to the environment, and to solve the problem of excessive VOC(volatile organic compounds) of solvent-based coatings at normal temperature. Film...
1.Type: There are three main types of water-based acrylic resins, including emulsion, water dispersion and aqueous solution. The emulsion is synthesized by emulsifying olefins in water under the action of water-based free radical initiator. The aqueous dispersion is synthesized by free radical solution polymerization or stepwise solution polymerization. Aqueous acrylics are directly soluble in wat...
Compared with solvent-based acrylic paint, the paint made of water-based acrylic resin has the advantages of stability, safe use, environmental protection, reducing environmental pollution and saving resources! At present, it has become an important development direction of the coating industry. The coating using water-based acrylic resin is a low-pollution or even pollution-free environmental pro...
water base varnish for glass Does not contain benzene, esters and other harmful solvents, does not contain free TDI, does not burn, is the latest environmental protection glass process paint, by the international and other authoritative verification institutions assessed as the real green environmental protection products. Solve problems It is required to blister at 75℃ for 30 minutes and it is re...
sinograce chemical
Sinograce Chemical is professional technical enterprise providing solutions of surface materials and manufacturing of raw materials. Sinograce Chemical Company is composed of R&D center, Manufacture center, Quality control department, Market center and International trade department. We have been dedicating to research on excellent paint/coating, adhesive for over 15 years. And now still conti...
Room 1013, Building A5, Financial Port Center, Yangzijiang Road, Baohe District, Hefei City， Anhui province, China
+86 0551 63459511
Copyright © 2015-2025 Anhui Sinograce Chemical Co., Ltd..All Rights Reserved.powered by dyyseo.com
top
English
français
русский
español
العربية