-
Performance of various water-based adhesives in printing and packaging applications
- 2024-01-13 15:43:40
- admin
Water-based adhesives for printing are very common, which mainly include water-based pasting adhesive, laminating adhesive, water-based sealing adhesive and so on. Water-based laminating adhesive Water-based film adhesive has been widely used in recent years for its high brightness, low cost, easy operation and water-based environmental protection. Water-based film adhesive is mainly divided into ...
-
Acrylic coating
- 2024-01-26 17:20:01
- admin
Acrylic paint is a fast drying paint made from pigments suspended in acrylic polymer emulsions and plasticizers, silicone oils, defoamizers, stabilizers, metal soaps. Acrylic paint is water-soluble, but becomes resistant to water when dried.Depending on the amount of paint diluted with water, or modified with acrylic gels, media, or pastes, the final acrylic paint can resemble watercolor, gouache,...
-
How does resin produce crack effect
- 2024-04-26 17:38:50
- admin
First, material selection and preparation To make the resin crack effect, you first need to prepare the resin and pigment. Resin selection of high transparency, high hardness, wear resistance products, pigments can choose mineral pigments or metal pigments, you can also add a small amount of color pigments to prepare a rich color. Second, color mixing Mix the paint into the resin one by one and st...
-
Water-based UV base oil for high adhesion paper products
- 2024-05-22 17:49:53
- admin
Enhance the adhesion of UV ink and UV varnish on paper products! The tape won't come off Fast drying speed to meet the needs of production line Good affinity with UV varnish and UV ink Excellent strength and toughness Water-based UV base oil for high adhesion paper products Anhui Sinograce Chemical waterborne UV primer for high adhesion paper products is a high-performance waterborne coa...
-
non-stick mold surface treatment process
- 2024-05-31 17:21:31
- admin
Rubber mold, silicone mold, shoe mold, latex pillow mattress mold, anti-stick easy mold Teflon spray, good model flon coating, non-stick mold surface treatment process The role of mold coating Molds are common tools in the manufacturing industry and are used to make a variety of products. In order to capture the service life and production efficiency of the mold, people often coat the surface of t...
-
Non-stick coating - Teflon
- 2024-06-01 17:25:28
- admin
The most important difference between non-stick cookware and ordinary cookware is that the surface is coated with a layer of non-stick paint, and the Teflon non-stick cookware commonly used on the market is to coat the main raw material of fluorinated resin such as polytetrafluoroethylene coating on the metal surface such as aluminum, copper or iron, and through sintering. Properties of NI-PTFE co...
-
Several common causes of white spots in the dry composite process of water-based adhesives
- 2024-07-05 17:38:31
- admin
Insufficient or uneven amount of glue due to insufficient amount of glue produced by the white spot can be observed in the composite machine. In the dry composite process, the coated adhesive must be able to fill the bumps and bumps on the surface of the ink and film to avoid appearance defects such as obvious white spots. When the water-based adhesive dry composite is used to produce lightweight ...
-
What are the soft and hard factors and adjustment methods of water-based acrylic resin
- 2024-07-06 15:18:09
- admin
The hardness and softness of the water-based acrylic resin can be adjusted according to specific needs, but it is usually biased towards the harder side. First, the characteristics and application of water-based acrylic resin Water-based acrylic resin is an environmentally friendly water-based resin, with non-toxic, easy to clean, dry fast and other characteristics, widely used in furniture, packa...
-
Film-forming properties of waterborne polyurethane emulsions
- 2024-07-10 16:37:27
- admin
The final state of waterborne polyurethane is a solid film. During the process from emulsion to solid film, accompanied by the evaporation of water and the concentration of water dispersion, the latex particles are close to each other. Before the solid content reaches 74%, the dispersion particles can move in the continuous phase of water. Under the influence of water/air interfacial tension, the ...
-
Adhesion strength characteristics of waterborne polyurethane emulsion
- 2024-07-16 18:02:45
- admin
Water based polyurethane emulsion has soft properties, so that it has good adhesion when attached to the surface of the object; At the same time, it can maintain a certain strength and does not crack. It is especially suitable for articles in high temperature, humid and chemically corrosive environment. This substance also has superior wear resistance and film smoothness, so it can form a uniform ...
-
Water based polyurethanes: properties, synthesis and application areas
- 2024-07-19 17:39:35
- admin
Waterborne Polyurethane (WPU) is a polyurethane system using water as a solvent or dispersion medium. In recent years, with the increasingly strict environmental regulations and the improvement of people's environmental awareness, waterborne polyurethane, as an environmentally friendly material, has received extensive attention and research. First, the characteristics of waterborne polyuretha...
-
The importance of residual ink treatment in the printing industry
- 2024-07-20 17:30:12
- admin
①The residual ink is converted into gray black ink According to the principle of color science, the complementary color of the ink mixed together, its hue will become gray black (red + green, yellow + blue-purple). Therefore, we can use this principle to deploy the complementary ink into gray-black ink by deploying the special color ink, and add it to the black ink in a certain proportion to use i...
-
Performance difference between aqueous emulsion and dispersion
- 2024-08-21 17:18:38
- admin
First, water-based lotion Aqueous emulsion is a colloidal dispersion system with water as the continuous phase and oil or other non-aqueous substances as the dispersing phase. It is a stable dispersion system formed by tiny oil droplets coated with surfactants. Water-based emulsion has many significant advantages, such as its low viscosity, easy to brush, easy to clean, non-toxic and harmless. The...
-
Analysis of water based emulsion breaking phenomenon
- 2024-09-13 13:23:06
- admin
There are several main reasons for water-based emulsion breaking: 1.Large temperature changes, water-based emulsion is easy to separate into water phase and oil phase at high temperature, and easy to crystallize at low temperature. 2.The selection of emulsifier is improper, and the type and dosage of emulsifier are different, which has a great impact on the stability of emulsification. The choice ...
-
Textile coating process detailed explanation
- 2024-08-23 17:32:42
- admin
Before the textile coating, it is necessary to pretreat the textile surface to ensure the adhesion and quality of the coating. Common surface treatment methods are: cleaning, degreasing, polishing and so on. Cleaning can be done with hot water or solvents, degreasing can be done with alkaline or acid degreasing agents, and polishing is done by mechanical removal of surface hair. The choice of coat...
-
The role of wax emulsion in coating of various coatings
- 2024-08-29 16:10:08
- admin
The role of wax emulsion in various coatings, in the coating formulation, polyethylene wax emulsion can effectively improve the wear resistance of the paint film, the paint film is very smooth, effectively reduce the friction coefficient of the coating, play a non-adhesive role, but also improve the service life of the product. 1.Synthetic wax emulsion can improve the toughness of the coating: whe...