Water-based coating adhesive is a method to process the surface of printed matter, to improve the surface gloss, strength and enhance the aesthetic effect. To measure the quality of the film, it is also necessary to examine its brightness, strength, bonding force and so on. Water-based wet coating is favored by customers for its high strength, easy recycling and pollution-free printed matter.
name: Water-based film glue
Features: High strength, easy to recycle, no pollution
Application: It is suitable for the film covering of high-grade color box
Features: Excellent gloss and transparency
Performance and use
Compared with traditional glue, water-based coated adhesive is made of imported raw materials, with high solid content, low viscosity, good process applicability, strong adhesive force, non-toxic and other advantages. It is suitable for aluminum foil (OPA), pre-treated polyethylene (HDPE,LDPE), polypropylene (OPP, CPP), polyester (PET), polyamide (PA,ONY) film. A two-component solvent-based polyurethane adhesive compounded between a metal-coated film and cellophane.
The use can enhance the brightness of the printed matter, increase the light resistance of the printed matter ink, increase the ability of the ink layer to prevent heat and moisture, and play the role of protecting the imprint and beautifying the product.
The water-based coating adhesive has environmental protection and no pollution, so that the waterproof quality performance makes it widely trusted by consumers.
Properties
Compared with traditional oil-based glue
1, has excellent coating performance, can replace the existing solvent laminating glue in the dry laminating machine. Can save 20~30% cost; For gold and silver cards can save about 50% of the cost.
2, with excellent gloss and transparency, aging resistance, yellowing resistance. It has good post-processing performance, can press fine lines, hot gold, hot silver, UV and so on.
3, environmental protection and green products can be safely used for food, medicine, tobacco and alcohol, children's toys and other packaging processing.
4, after use, the machine should be cleaned with water, improve the production environment, completely eliminate the electrostatic fire accident during the coating process of oily products, and ensure the health of production personnel. Can be used on the original oil machine.
6.Good temperature resistance, 120h under the constant temperature condition of 60℃ or -18℃ without opening foam.
application
1: Suitable for the coating of high-end hand bag and high-end color box.
2: Suitable for BOPP film/printed matter, PET laser film and paper overlay.
Application Method
1, this product has been adjusted according to the requirements of the coating process indicators, do not add water and other solvents when using.
2.After adhesive coating, the drying and pressing temperature is recommended to be 70-80℃, which can be adjusted according to the film coating speed and product requirements.
Attention matters
1, stored in a cool place, avoid direct sunlight, storage temperature is 5-40 ° C, should pay attention to antifreeze, long time storage below 0 ° C will destroy product performance.
2, please do not mix with other products, unused products should be sealed and stored.
Water-based coated adhesive includes water-based hot coated adhesive and water-based cold coated adhesive. The production process adopts emulsion polymerization method, and it can be produced by sharing a set of production equipment. Zhongen Chemical Company provides water-based hot compound, water-based cold compound product overview, product characteristics, quality indicators, production process conditions, etc., for preparing to produce water-based laminated glue enterprises or individuals to provide water-based laminated glue, welcome customers to consult.