• 2024-04-25 18:06:11
• admin

• 2024-04-24 17:57:58
• admin

Ink scraping is not clean troubled many manufacturers, there are ten reasons for scraping is not clean, save it for use! 1.Ink viscosity is too high When the viscosity of the ink increases, the surface tension also increases correspondingly, and the force between them also increases, so that the scraper will increase the impact force of the ink on the scraper in the contact process with the ink, d...

• plastisol ink screen printing
• silk screen ink printing

• 2024-04-19 17:51:28
• admin

"If there are small bubbles in the complex, opaque and foggy, it will not only affect the appearance quality, but also affect the peeling strength of the complex, reducing it, which is a very bad phenomenon." 1.The surface tension of the base film is too small, the infiltration is poor, the glue is not uniform, and the space without glue is empty and bubbles are generated. The solution is to use a...

• composite resin
• aluminum composite material
• glue to glue aluminum composite panel sheet

• 2024-04-18 18:01:31
• admin

Considering from two aspects of packaging cost and performance requirements, the thickness selection of each layer of composite flexible packaging materials should be carefully weighed. In general, the heat seal layer can be determined by market generalization and standardization, the strength support layer is generally determined according to the weight of the packaged product, and the thickness ...

• 2024-04-17 17:56:09
• admin

The transparency of composite film is very high, but in the composite processing of plastic film, the composite film often has problems such as insufficient transparency. So, what is the reason for affecting the transparency of the composite film? This article analyzes one by one for reference. Improper selection of adhesives: Such as the color of the adhesive itself is dark or the fluid...

• composite film glue
• composite adhesive
• adhesive bonding for composite

• 2024-04-12 17:34:16
• admin

The performance requirements of water-based varnish for printing paper glazing are as follows: 1.The film has good environmental resistance. Some of the printed matter after glazing is used to make all kinds of packaging cartons, in order to be able to play a good protective effect on the packaged products, the environmental resistance of the glazing film layer must be better. For example, the pac...

• screen printing ink for paper
• Printing paper glazing requirements for water-based polish

• 2024-04-10 17:39:00
• admin

1.There are many formulations of coated glue, and different formulations need to be determined according to the specific use. It generally includes basic glue, thickener, curing agent, auxiliaries and other ingredients. 2.Basic glue is the most important component of laminating glue, it can be selected according to different use requirements of different types, such as water-based, oily, dilu...

• lamination glue for pvc film
• lamination glue adhesive

• 2024-04-09 17:45:29
• admin

Color paste, also known as pigment paste, is an important form of dye application, which is widely used in textile, ink, paint and other industries. In the classification of pastes, low-halogen pastes and ordinary pastes are two common types. They have certain differences in composition, performance and use, and the differences between the two types of pastes will be discussed in detail below. Fir...

• coloring paste for paint
• water-based color paste for inks
• Color paste

• 2024-04-03 17:48:27
• admin

The main difference is that the nature is different, the production process is different, and the characteristics are different, as follows: First, the nature is different 1.Flexo printing Flexo printing is a direct printing method known as flexo printing because of the use of elastic, raised image plates. 2.Gravure printing Gravure refers to gravure printing, first the printing plate on the exces...

• Flexo printing
• Gravure printing
• silicone screen printing ink