Categories
new blog
Water based polyurethane emulsion has soft properties, so that it has good adhesion when attached to the surface of the object; At the same time, it can maintain a certain strength and does not crack. It is especially suitable for articles in high temperature, humid and chemically corrosive environment. This substance also has superior wear resistance and film smoothness, so it can form a uniform ...
The viscosity of waterborne polyurethane emulsion has different distribution range, and the viscosity of waterborne polyurethane emulsion has different requirements when applied in different fields. In addition to adjusting the viscosity by adding thickening agents, it can also affect the viscosity of waterborne polyurethane emulsion from the molecular structure, including the content of hydrophil...
Due to the hydrophobic properties of waterborne polyurethane resin, it is difficult to dissolve in water or disperse uniformly, and the high reactivity of isocyanate groups to water, the direct synthesis of waterborne polyurethane faces many challenges. Therefore, to achieve the preparation of waterborne polyurethane, the primary strategy is to cleverly integrate hydrophilic functional groups (suc...
The final state of waterborne polyurethane is a solid film. During the process from emulsion to solid film, accompanied by the evaporation of water and the concentration of water dispersion, the latex particles are close to each other. Before the solid content reaches 74%, the dispersion particles can move in the continuous phase of water. Under the influence of water/air interfacial tension, the ...
The hardness and softness of the water-based acrylic resin can be adjusted according to specific needs, but it is usually biased towards the harder side. First, the characteristics and application of water-based acrylic resin Water-based acrylic resin is an environmentally friendly water-based resin, with non-toxic, easy to clean, dry fast and other characteristics, widely used in furniture, packa...
Insufficient or uneven amount of glue due to insufficient amount of glue produced by the white spot can be observed in the composite machine. In the dry composite process, the coated adhesive must be able to fill the bumps and bumps on the surface of the ink and film to avoid appearance defects such as obvious white spots. When the water-based adhesive dry composite is used to produce lightweight ...
1.Ink The three primary color inks have different degrees of color bias, which will affect the color bias of the whole picture to different degrees. However, a small amount of color bias can be corrected from the ink preparation. When printing to grasp the gray balance of the ink used, the same amount of yellow, product, green do not produce neutral gray, they produce lighter, more turbidity with ...
Many people think that the temperature of the primer baking (dry) of Teflon paint is not important, just bake it, in fact, this is a misunderstanding. If you usually encounter the following situations, please carefully bake the primer. For the primer coating of Teflon paint, we recommend a temperature of 150 ° C, after the workpiece reaches 150 ° C, bake for 5-10 minutes. I. If the temperature of ...
Thermal spray Teflon can not only reduce product costs and improve production efficiency, but also can be used to directly solve problems on the product to improve product quality and increase sales. After being sprayed with Teflon, it has the following characteristics: 1.Slippability: PTFE spray film has a low coefficient of friction. When the load slides, the friction coefficient changes, b...
sinograce chemical
Sinograce Chemical is professional technical enterprise providing solutions of surface materials and manufacturing of raw materials. Sinograce Chemical Company is composed of R&D center, Manufacture center, Quality control department, Market center and International trade department. We have been dedicating to research on excellent paint/coating, adhesive for over 15 years. And now still conti...
Room 1013, Building A5, Financial Port Center, Yangzijiang Road, Baohe District, Hefei City， Anhui province, China
+86 0551 63459511
Copyright © 2015-2025 Anhui Sinograce Chemical Co., Ltd..All Rights Reserved.powered by dyyseo.com
top
English
français
русский
español
العربية