• Water-based ink composition
    • 2022-07-09 11:03:34
    • admin

    Water-based ink is composed of resin (water-soluble resin colloidal dispersion emulsion polymer) aqueous amine (mainly ammonia) pigment (organic pigment inorganic pigment) and additives.The so-called water-based ink is mainly water as a solvent by scientific processing, compared with other printing ink, water-based ink, because it does not contain volatile toxic organic solvents, so in the printin...

  • How to choose the appropriate label glue
    • 2022-07-09 11:05:26
    • admin

    1.Permanent and removable options In terms of the performance of adhesives, they can be divided into two categories: permanent adhesives and removable adhesives.(Permanent is generally used in electronic machinery, such as electronic label, typical: mobile phone battery label, removable is generally used in food, personal care, such as: wet wipes label, fruit label, clothing label, etc.) 2.The sur...

  • Waterborne Acrylic Resin
    • 2022-07-09 11:01:25
    • admin

    Waterborne Acrylic Resin Product Description: The water-based acrylic resin is made of acrylic acid and acrylate monomer through solution polymerization. Product purpose: This product can be used for water-based aluminum foil gloss and ink, water-based gravure printing paper gloss and ink, water-based carton ink manufacturing Product features:alcohol water as the main solvent, has no smell, no tox...

  • Application scenarios of waterborne polyurethane defoaming agent
    • 2022-07-09 11:06:53
    • admin

    Waterborne polyurethane is often used in the preparation of waterborne coatings because of its excellent film formation and adhesion, excellent flexibility and wear resistance.However, water-based polyurethane dispersion contains a lot of surfactant, easy to produce bubbles, and because of the special properties of water-based polyurethane, it is necessary to use the characteristics of water-based...

  • Characteristics of pressure sensitive tape
    • 2022-07-09 11:10:25
    • admin

    The bonding effect can be achieved by applying pressure for a short time (non-aqueous solvent heating) It overcomes the solvent volatilization and drying time needed during the operation of structural adhesive, and can improve the working environment After stripping, it can be corrected without contamination and can be reused for many times Easy to operate, can greatly improve the production effic...

  • How to distinguish paste box glue quality stand or fall
    • 2022-07-09 11:13:11
    • admin

    First, pour the glue on the flat glass to observe its rheology, and wiggle it to observe its rheology,If the flow of glue is too fast, it means that the glue is too thin and poor, and too thick is not conducive to bonding. Secondly, with a hand dip to observe its viscosity if you can slowly draw, a little sticky hand is better. Then, pour it on a small piece of glass to observe its film forming ti...

  • Common surface treatment methods for automotive interior parts bonding
    • 2022-07-09 11:16:41
    • admin

    Surface treatment of metal materials 1)metal material surface degreasing: organic solvent degreasing alkali degreasing electric degreasing ultrasonic degreasing 2)metal material surface derusting 3)Activation treatment of metal surface 4)Metal surface sandblasting treatment: increase the surface roughness Surface treatment of non-metallic materials 1)Mechanical treatment: sandpaper grinding, etc 2...

  • Nonstick coating for nonstick pans
    • 2022-07-09 11:22:08
    • admin

    Non-stick pot is cooking will not stick to the bottom of the pot, because the bottom of the pot uses a non-stick coating, the common non-stick can best have teflon coating and ceramic coating. The non-stick pan overcomes all the shortcomings of the traditional pot, easy to clean, a light wipe is clean, non-stick pan can easily fry food without sticking to the bottom, can minimize the oil, the kitc...

  • Disadvantages of traditional label printing
    • 2022-07-09 11:28:15
    • admin

    (1)The labels on the market (especially film labels) mostly use screen printing and flexographic printing, which not only has a complex processing process, a long cycle, but also has poor timeliness. (2)In terms of product design, the selection of design scheme needs to be modified repeatedly, which is not only troublesome, but also costly (3)The traditional printing method to achieve variable dat...

Copyright © 2015-2024 Anhui Sinograce Chemical Co., Ltd..All Rights Reserved.powered by dyyseo.com

top