TH-935 is an associative thickener that provides excellent film build, leveling, outstanding resistance to roller spattering, and resistance to microbial attack. It is designed to give medium shear rate viscosity in latex paints.

Wetting agent wet-245 has excellent substrate wetting and leveling, widely used in all kinds of paint and ink coating system. Have good water solubility and smoothness, also can reduce the surface friction, and prevent the generation of defects such as shrinkage, orange peel.

Silicone wetting agent for water based rubber paint WET-245 is a high wetting agent modified by polyether siloxane copolymer. It has excellent substrate wetting, anti-crater effect and flow promotion performances. It is widely used in all kinds of water based and solvent based system.

SA2291 This product is a self-crosslinking emulsion with the advantages of small amount of glue, high peel strength, good toughness, no glue opening when exposed to moisture, deep embossing and shallow embossing, and general use on flat surfaces.

Water based Bopp and paper lamination adhesive SA-2292 is a self-crosslinking emulsion with low glue content, high peel strength, good toughness, and does not peel off when exposed to moisture. It is suitable for laminating flat printing cardboard, paper with BOPP film.

Description Water based polyurethane dispersion PU-405 is water based polyurethane dispersion with soft feel, excellent abrasion resistant. It is designed for safety gloves coating. Compatible with nitrile latex. Type Water based polyurethane Key features Co-solvent Free Formaldehyde free Very soft feel High tensile strength Excellent abrasion resistant Compatible with nitrile latex Typical properties Appearance           Milky white liquid pH                          7.0-8.0 Solid content          40±1% Charge                   Anionic Viscosity (25℃) 200-300cP Tensile strength (MPa) >25 100% Modulus (MPa) >20 Elongation (%) >700 Application -Textile coating -Textile binder -Safety gloves coating Storage and Handling Available in 200 kg/ barrel or 25 kg/ barrel Store products in tightly closed original containers at 5-40℃ Shelf life: 9 months from delivery date According to non-dangerous goods transport

Description Water based polyurethane dispersion PU-406 is water based polyurethane dispersion with soft feel, excellent abrasion resistant. It is designed for pure PU safety gloves coating with high solid content. Type Water based polyurethane Key features Co-solvent Free Formaldehyde free Soft feel High tensile strength Excellent elastic memory Excellent abrasion resistant Typical properties Appearance                    Milky white liquid pH                                   7.0-8.0 Solid content                   50±1% Charge                            Anionic Viscosity (25℃)               200-300cP Tensile strength (MPa)    >25 100% Modulus (MPa)     >20 Elongation (%)                >650 Application -Safety gloves coating -Textile coating -Leather basecoat Storage and Handling Available in 200 kg/ barrel or 25 kg/ barrel Store products in tightly closed original containers at 5-40℃ Shelf life: 9 months from delivery date According to non-dangerous goods transport

Water based non-stick coating PF-633 is a waterborne three-layer coating made up of polytetrafluoroethylene, polyamide-imide and polyethersulfone.

Description Water based polyurethane dispersion PU-405 is water based polyurethane dispersion with soft feel, excellent abrasion resistant. It is designed for safety gloves coating. Compatible with nitrile latex. Type Water based polyurethane Key features Co-solvent Free Formaldehyde free Very soft feel High tensile strength Excellent abrasion resistant Compatible with nitrile latex Typical properties Appearance           Milky white liquid pH                          7.0-8.0 Solid content          40±1% Charge                   Anionic Viscosity (25℃) 200-300cP Tensile strength (MPa) >25 100% Modulus (MPa) >20 Elongation (%) >700 Application -Textile coating -Textile binder -Safety gloves coating Storage and Handling Available in 200 kg/ barrel or 25 kg/ barrel Store products in tightly closed original containers at 5-40℃ Shelf life: 9 months from delivery date According to non-dangerous goods transport

Self-crosslinking Acrylic Emulsion for Textile Coating (Hard) PA-512 is a hard Self-crosslinking Acrylic Emulsion binder with water resistant, firm handle, block and abrasion resistance, and non-yellowing characteristics. It is allowed to be introduced into co ating and resin finishing formulations.

Self-crosslinking Acrylic Emulsion for Textile Coating (Soft) PA-511 is a soft binder with water resistant, excellent weathering and non-yellowing properties. It is a suitable base for high performance textiles.

WM-961 is a waterborne modified polymer emulsion, featuring excellent durability, facile construction properties, corrosion resistance, as well as long-term outstanding light and color retention capabilities. It is applicable to cold-rolled plates, galvanized plates, nickel-plated components, etc.

This product is a self-crosslinking emulsion with low odor, high peel strength, good toughness, no debonding when exposed to moisture, suitable for machine coating, high-efficiency universal box glue.

FEP has excellent temperature resistance, corrosion resistance, outstanding chemical inertness, excellent electrical insulation and low friction coefficient, and can be used for a long time at 200 ℃. FEP has stable and excellent performance, suitable for diffusion and coating processes. It can be used as a demolding material for various molds, as well as an anti stick coating on the surface of various machinery and tools.

FEP has excellent temperature resistance, corrosion resistance, outstanding chemical inertness, excellent electrical insulation and low friction coefficient, and can be used for a long time at 200 ℃. FEP has stable and excellent performance, suitable for diffusion and coating processes. It can be used as a demolding material for various molds, as well as an anti stick coating on the surface of various machinery and tools.

FEP has excellent temperature resistance, corrosion resistance, outstanding chemical inertness, excellent electrical insulation and low friction coefficient, and can be used for a long time at 200 ℃. FEP has stable and excellent performance, suitable for diffusion and coating processes. It can be used as a demolding material for various molds, as well as an anti stick coating on the surface of various machinery and tools.