Product Detail
                    
	Description 
	This is a specially formulated high sticky adhesive, especially suitable for sticking to difficult and rough surfaces, such as woven bags, wood boards, cartons, etc. It has good performance in high-speed die-cutting, waste discharge, and automatic labeling
 
	Type 
	Pressure sensitive adhesive 
	
 
	Key Features 
	High initial adhesion, strong cohesion, strong adhesion and better adsorption
A high sticky adhesive, suitable for die cutting and printing
 
	
 
	Typical Properties 
	Appearance: Amber solid            
Solid content: 100%
Viscosity(175℃): about 13000cps     
Softening point: 92℃(Ring and ball method)
Coating thickness: 23um
Loop Tack(N/25mm): ≥26N
90°Peel Adhesion(N/25mm): ≥14N
Holding Power(H/25mm): ≥72h
Coating thickness: 30um
Loop Tack(N/25mm): ≥28N
90°Peel Adhesion(N/25mm): ≥15N
Holding Power(H/25mm): ≥72h
The lowest Labeling Temperature: 5℃
Service Temperature: -20℃~65℃
Test conditions: The test strips were placed under standard conditions of 23℃±2℃, 50%RH±5%RH for 4 hours before testing.
 
	
 
	
	Application 
	Applicable to PP (polypropylene), PET, synthetic film, coated paper, kraft paper and other surface materials, with good adhesion, not suitable for PVC substrates 
	Recommended operating conditions: Suitable for all conventional slot glue and roller hot melt adhesive dispensing systems 
	Recommended operating temperature: 140º C to 180º C, depending on the machine, substrate, environment and other conditions
Note: Do not mix with other adhesives. The hot melt adhesive tank must be tightly covered to prevent debris from falling into and affecting the performance of the adhesive. Since hot melt adhesive must be heated when used, personal protective equipment must be worn. It is recommended to use it in a "first in, first out" cycle.
 
	 
	
 
	Storage and Handling 
	- 25kg/box 
	- Store below 40°C in a dry cool place.  
	- Storage period: one year  
	- According to non-dangerous goods transport