Step 1: Surface treatment 

When cleaning and degreasing, special glass cleaners must be used to ensure the success of the coating, to ensure that the hydrophobic nano coating and the substrate surface is easy to clean, forming a complete chemical bond, the surface should be carefully cleaned before use

Degree of the combination of hydrophobic nano coating and substrate directly determines the life and scratch resistance of coatings products, use the detergent for cleaning glass, the glass surface with a clean towel or non fiber tissue glass cleaner, repeatedly is wiped, reoccupy clear water is rinsed clean, and then with a clean towel or no fiber paper towel dry, to ensure that no float glass surface clean and dry the blues No grease and other dirt easy to clean, should be used immediately after cleaning

Step 2: Surface coating

Please note that direct sunlight should be avoided during construction. If the windshield is to be treated, the left and right sides should be treated separately

1. apply a certain amount of hydrophobic nano liquid that is easy to clean on the glass, form a thin liquid film with medical gauze or dust-free cloth, and then wait 20 to 30 seconds, immediately wipe with dry cloth, wipe in the way of drawing circles, until there is no trace on the surface

2. After 6 to 8 hours, the glass surface will show good hydrophobic effect

3. If you feel that the result is not ideal, you can repeat steps 1 and 2, and then do it again

4. For the treatment of automobile windshield, please do not use windshield wipers when handling and drying

Our company sells all kinds of products such as nano superhydrophobic on automobile glass, welcome to consult